Rosewill CMG1000G5

Rosewill CMG5 1000W Modular Power Supply User Manual

Model: CMG1000G5

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your Rosewill CMG5 1000W Modular Power Supply. Please read this manual thoroughly before installation and retain it for future reference.

The Rosewill CMG5 1000W is a fully modular 80 PLUS Gold certified power supply designed for personal computers. It is compatible with ATX 3.0 & 3.1 standards and features a native 600W PCIe 5.0 / Gen 5 12+4 Pin 12V-2x6 cable, supporting modern high-performance graphics cards.

Rosewill CMG5 1000W Power Supply front view

Imaj: Devan view of the Rosewill CMG5 1000W Modular Power Supply, showing the fan grille and branding.

2. Enfòmasyon sou Sekirite

WARNING: Improper installation or use can lead to serious injury or equipment damage. Always follow these safety guidelines:

  • Asire w ke ekipman pou kouran an dekonekte nan priz kouran AC a anvan ou enstale oswa manyen li.
  • Pa ouvri inite ekipman pou pouvwa a. Gwo vòltajtages are present inside, and there are no user-serviceable parts.
  • Install the power supply in a well-ventilated area. Do not block any ventilation openings.
  • Use only the modular cables provided with this power supply. Using incompatible cables can damage the PSU and connected components.
  • Ensure all cable connections are secure and fully seated to prevent electrical shorts or overheating.
  • Evite ekspoze ekipman pou pouvwa a nan imidite oswa tanperati ekstrèm.
  • If the power supply emits smoke, unusual odors, or loud noises, immediately disconnect it from the AC power and contact support.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

  • Rosewill CMG5 1000W Modular Power Supply Unit
  • AC pouvwa kòd
  • Modular Cable Set (see below for details)
  • Montaj Vis
  • Manyèl Itilizatè (dokiman sa a)
Rosewill CMG5 1000W Power Supply modular cable connections

Image: Rear panel of the Rosewill CMG5 1000W Power Supply showing the modular cable connection ports labeled for MB, CPU, PERIF/SATA, PCI-E 5.0, and PCI-E.

Ansanm Kab Modilè:

Diagram of Rosewill CMG5 1000W Power Supply cables and dimensions

Image: Diagram illustrating the types and lengths of modular cables included with the Rosewill CMG5 1000W Power Supply, including 24-pin Motherboard, 12+4-pin PCIe 5.0, 4+4-pin CPU, 6+2-pin PCIe, SATA, and 4-pin Molex connectors.

  • 1x 24-pin Motherboard Cable (600mm)
  • 1x 12+4-pin PCIe 5.0 Cable (600mm)
  • 2x 4+4-pin CPU Cables (700mm each)
  • 4x 6+2-pin PCIe Cables (500mm each, with two connectors per cable)
  • 2x SATA Cables (500mm, with four SATA connectors per cable)
  • 1x 4-pin Molex Cable (500mm, with four Molex connectors)

4. Enstalasyon ak Enstalasyon

Follow these steps to install your Rosewill CMG5 1000W Power Supply:

  1. Prepare Sistèm ou an:
    • Turn off your computer and disconnect the AC power cord from the wall outlet.
    • Louvri ka òdinatè w lan.
    • Si w ap ranplase yon ekipman pou pouvwa ki deja egziste, dekonekte tout kab ki nan ansyen PSU a epi retire li nan bwat la.
  2. Install the Power Supply:
    • Carefully place the new Rosewill CMG5 1000W PSU into the power supply bay of your computer case.
    • Secure the PSU to the case using the provided mounting screws. Ensure the fan is facing the correct direction for optimal airflow (typically facing down if there's a bottom vent, or up if not).
  3. Konekte Kab Modilè yo:
    • Identify the necessary cables for your components (Motherboard, CPU, PCIe, SATA, Molex). Refer to the "Package Contents" section for cable types.
    • Connect the required modular cables to the corresponding ports on the power supply unit. Ensure they click firmly into place.
    • Connect the other end of each cable to your motherboard, CPU, graphics card(s), storage drives, and other peripherals. Pay close attention to the orientation of each connector.
    • For PCIe 5.0 graphics cards, use the dedicated 12+4-pin PCIe 5.0 cable. Ensure it is fully inserted into both the PSU and the graphics card.
  4. Tèks final yo:
    • Double-check all cable connections to ensure they are secure. Loose connections can cause system instability or damage.
    • Organize cables to improve airflow within the case.
    • Fèmen ka òdinatè w lan.
  5. Pouvwa sou:
    • Konekte fil elektrik AC a ak ekipman pou pouvwa a ak Lè sa a, nan yon priz miray.
    • Flip the main power switch on the back of the PSU to the "ON" position.
    • Pouvwa sou òdinatè w lan.
Rosewill CMG5 1000W Power Supply rear view with power switch and ECO mode switch

Imaj: Dèyè view of the Rosewill CMG5 1000W Power Supply, showing the AC power input, main power switch, and an "ECO" mode switch.

5. Operasyon Enstriksyon

The Rosewill CMG5 1000W Power Supply is designed for reliable and efficient operation.

Eco Silent Mode:

  • The power supply features an "ECO" mode switch located on the rear panel.
  • When the ECO mode is ON, the 120mm Fluid Dynamic Bearing (FDB) fan will operate in a semi-fanless mode. The fan will remain off under low to moderate loads, providing silent operation. It will automatically spin up when the load increases to maintain optimal temperatures.
  • When the ECO mode is OFF, the fan will operate continuously, adjusting its speed based on the internal temperature and load.
  • Choose the mode that best suits your preference for noise levels and cooling performance.

Power Excursion Capabilities:

This power supply is designed to handle power excursions up to 235% and GPU power excursions up to 300%, ensuring stable power delivery during peak demands from high-performance components.

6. Antretyen

Bon antretyen asire lonjevite ak pèfòmans optimal ekipman pou pouvwa ou a.

  • Netwayaj: Periodically clean the exterior of the power supply and its fan grille to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Ensure the PSU is powered off and unplugged before cleaning.
  • Jesyon kab: Ensure cables are not obstructing airflow within your computer case. Re-route or tie cables as needed to maintain good ventilation.
  • Kondisyon anviwònman: Fè fonksyone ekipman pou pouvwa a nan yon anviwònman pwòp, sèk ak bon vantilasyon. Evite tanperati ak imidite ekstrèm.

NAN. Depanaj

Si ou rankontre pwoblèm ak ekipman pou pouvwa ou a, gade pwoblèm ak solisyon komen sa yo:

PwoblèmKòz posibSolisyon
Odinatè a pa limen.
  • Kòd pouvwa AC pa konekte.
  • Main power switch on PSU is OFF.
  • Koneksyon kab ki lach.
  • Faulty components (motherboard, CPU, etc.).
  • Ensure AC power cord is securely connected to PSU and wall outlet.
  • Flip the main power switch on the PSU to the "ON" position.
  • Check all modular cable connections (24-pin, CPU, PCIe) are fully seated.
  • Teste konpozan yo endividyèlman si sa posib.
System crashes or restarts randomly.
  • Insufficient power delivery.
  • Surchof.
  • Koneksyon kab ki lach.
  • Asire w ke bezwen pouvwa sistèm ou an pa depase 1000W.
  • Check for proper ventilation and clean any dust buildup.
  • Verifye tout koneksyon kab yo byen fèm.
Unusual noises from PSU.
  • Fan obstruction or defect.
  • Pwoblèm konpozan entèn.
  • Ensure no cables are hitting the fan.
  • If noise persists, discontinue use and contact Rosewill support.
Cables appear melted or discolored.
  • Poor connection or excessive load.
  • Immediately power off and unplug the system.
  • Ensure all connectors, especially the 12V-2x6 (PCIe 5.0) connector, are fully and correctly seated.
  • Do not reuse damaged cables. Contact Rosewill support for replacement cables or warranty service.

8. Espesifikasyon

KarakteristikDetay
Non modèlCMG1000G5
MakRosewill
Sòti Wattage1000 Watts
Faktè fòmATX
Metòd refwadismanLè (Vantilatè FDB 120mm)
Dimansyon atik (L x W x H)11.4 x 9 x 4.6 pous (289.56 x 228.6 x 116.84 mm)
Pwa atik6.3 liv (2.86 kg)
Konsepsyon ekipman pou pouvwaModilè konplè
Sètifikasyon Efikasite80 PLUS Gold
Antre Voltage100-240 Volts AC
Antre frekans50-60 Hz
KonektèATX, PCIe (including 12V-2x6 for PCIe 5.0)
Estanda ATXATX 3.0 & 3.1 Compatible
Kondansateur100% Japonè kondansateur elektwolitik
PwoteksyonOCP, OPP, OTP, OVP, SCP, UCP (Over Current, Over Power, Over Temperature, Over Voltage, Short Circuit, Under Current Protection)
Rosewill CMG5 1000W Power Supply side view with specifications label

Imaj: Bò kote view of the Rosewill CMG5 1000W Power Supply, displaying the electrical specifications label including AC input, DC output voltages, and total output power.

9. Garanti ak sipò

Enfòmasyon sou garanti:

The Rosewill CMG5 1000W Power Supply comes with a Garanti manifakti 5 zanGaranti sa a kouvri domaj nan materyèl ak nan fabrikasyon anba itilizasyon nòmal. Tanpri konsève prèv acha ou pou reklamasyon garanti.

For detailed warranty terms and conditions, please refer to the official Rosewill websit oswa kontakte sèvis kliyan yo.

Sipò Kliyan:

If you have any questions, require technical assistance, or need to initiate a warranty claim, please contact Rosewill customer support:

  • Websit: Visit the official Rosewill websit pou resous sipò, FAQ, ak enfòmasyon pou kontakte yo.
  • Imèl/Telefòn: Refer to the Rosewill websit la pou jwenn enfòmasyon kontak ki pi resan yo.

When contacting support, please have your product model (CMG1000G5) and proof of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.