VEVOR Hydraulic Motorcycle Lift Jack

1. Enfòmasyon sou Sekirite

Read and understand all instructions before using this hydraulic motorcycle lift jack. Failure to follow these instructions may result in serious injury or property damage.

• Kapasite maksimòm: Pa depase kapasite chaj maksimòm 1500 liv (0.7 tòn). Twòp chaj ka lakòz ekipman an kraze epi blese.
• Sifas ki estab: Always operate the lift on a hard, level, and stable surface. Uneven surfaces can cause instability and tipping.
• Sant gravite: Position the lift jack directly under the vehicle's center of gravity to ensure stability during lifting and lowering.
• Lock sekirite: Always engage the 3-position safety lock immediately after lifting the vehicle to the desired height. Never rely solely on the hydraulic system to hold the load.
• Veyikil an sekirite: Use the included ratchet belts to securely strap the vehicle to the lift platform before raising or lowering, and during maintenance.
• Zòn klè: Keep hands, feet, and other body parts clear of moving parts and pinch points during operation. Ensure the work area is free of obstructions.
• Ekipman Pwoteksyon Pèsonèl: Wear appropriate safety gear, such as safety glasses and gloves, when operating the lift.
• Sistèm idwolik: Regularly inspect the hydraulic system for leaks or damage. Do not use if any leaks are detected or if the system appears compromised.

2. Pwodwi souview

The VEVOR Hydraulic Motorcycle Lift Jack (Model ZX0901-3C) is designed to safely lift motorcycles, ATVs, UTVs, and other powersports vehicles for maintenance, cleaning, and storage. Constructed from high-strength alloy steel with a durable powder coating, it offers robust support and long-term reliability.

• Kapasite chaj ki wo: Supports up to 1500 lbs (0.7 tons).
• Adjustable Lifting Range: Provides a lifting height from 4.7 inches (120 mm) to 15 inches (385 mm).
• Hydraulic Foot-Operated System: Allows for easy and efficient lifting with minimal effort.
• Amelyore Mobilite: Equipped with 2 universal casters and 2 directional casters for 360-degree flexible movement and short-distance transportation of vehicles.
• Karakteristik sekirite: Includes a 3-position safety pin, non-slip rubber stripe platform, and two ratchet belts for secure operation.

3. Espesifikasyon

4. Enstalasyon ak Asanblaj

The VEVOR Hydraulic Motorcycle Lift Jack comes mostly pre-assembled. Minor assembly is required to attach the handle and foot pedals.

1. Depake konpozan: Carefully remove all components from the packaging. Verify that all parts listed in the 'What's in the Box' section are present.
2. Tache Manch: Insert the long handle into the designated slot on the lift jack and secure it with the provided pin or bolt.
3. Mete pedal yo: Connect the lifting and lowering foot pedals to their respective mechanisms on the jack, ensuring they are securely fastened.
4. Enspekte Koneksyon: Double-check all connections and fasteners to ensure they are tight and secure before first use.

Ki sa ki nan bwat la:

• 1 x Hydraulic Motorcycle Lift
• 2 x Ratchet Belt

5. Operasyon Enstriksyon

5.1. Ascent Operation (Lifting the Vehicle)

1. Mete asansè a nan pozisyon sa a: Carefully roll the lift jack under the motorcycle or ATV, ensuring it is centered beneath the vehicle's frame or designated lifting points. The non-slip rubber pads should make contact with the vehicle's underside.
2. Leve machin nan: Press the foot pedal repeatedly to engage the hydraulic pump and raise the vehicle. Continue pumping until the desired height is reached.
3. Angaje Sekirite Lock: Once the vehicle is at the desired height, immediately engage the 3-position safety lock by pushing the safety pin into the nearest locking position. This prevents accidental lowering.
4. Secure with Ratchet Belts: Use the two included ratchet belts to firmly secure the vehicle to the lift platform. This adds an extra layer of stability and prevents the vehicle from shifting.

5.2. Descent Operation (Lowering the Vehicle)

1. Remove Ratchet Belts: Before lowering, ensure the vehicle is stable and carefully release the ratchet belts.
2. Disengage Safety Lock: Gently lift the vehicle slightly using the foot pedal, then pull the safety pin out to disengage the safety lock.
3. Desann machin nan: Slowly press the secondary footplate (release pedal) to gradually lower the vehicle. Control the descent speed by adjusting pressure on the pedal.
4. Remove Lift: Once the vehicle is fully lowered and stable on the ground, carefully roll the lift jack out from underneath.

6. Antretyen

Regular maintenance ensures the longevity and safe operation of your VEVOR Hydraulic Motorcycle Lift Jack.

• Verifikasyon likid idwolik: Periodically check the hydraulic fluid level. If low, refill with a high-quality hydraulic jack oil. Refer to the hydraulic unit for specific fluid requirements.
• Enspekte pou fwit: Regularly inspect the hydraulic cylinder, hoses, and connections for any signs of fluid leaks. Address leaks immediately to prevent loss of lifting capacity.
• Lubrifikasyon: Lubricate all pivot points, pins, and moving parts with general-purpose grease or oil to ensure smooth operation and prevent rust.
• Lapwòpte: Keep the lift jack clean and free of dirt, debris, and corrosive materials. Wipe down after each use.
• Depo: Store the lift jack in a dry, protected area when not in use. Lower the lift completely to relieve pressure on the hydraulic system during storage.
• Enspeksyon estriktirèl: Annually inspect the steel structure for any signs of damage, cracks, or deformation. Ensure all bolts and pins are secure.

NAN. Depanaj

This section addresses common issues you might encounter with your hydraulic lift jack.

• Lift Not Raising:
  • Ensure the release valve is fully closed.
  • Check hydraulic fluid level; refill if necessary.
  • Inspect for air in the hydraulic system; bleeding may be required (refer to hydraulic unit instructions).
  • Verify no obstructions are preventing the lifting mechanism from extending.
• Lift Not Lowering:
  • Ensure the safety lock is fully disengaged.
  • Confirm the release pedal/valve is fully opened.
  • Check for any mechanical binding or obstructions.
• Lift Drifts Down Slowly:
  • This indicates a hydraulic leak or internal valve issue. Inspect for external leaks. If no external leaks are visible, internal seals may be worn. Contact customer support for assistance.
• Pyès ki manke oswa ki domaje lè yo rive:
  • If components are missing or damaged upon delivery, document the issue with photos and contact VEVOR customer support immediately for resolution.

8. Garanti & Sipò

Pwodwi VEVOR yo fèt pou dire lontan ak pèfòmans. Pou enfòmasyon sou garanti, sipò teknik, oswa pou mande enfòmasyon sou pyès ranplasman, tanpri kontakte sèvis kliyan VEVOR atravè sèvis ofisyèl yo. website or the platform where the product was purchased.

Please have your model number (ZX0901-3C) and purchase details ready when contacting support to ensure efficient service.