Total Angle Grinder 5-inch (12cm) 1010W - Model TG1121256-3 User Manual

Entwodiksyon

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Total TG1121256-3 Angle Grinder. Please read this manual thoroughly before using the tool and keep it for future reference. This angle grinder is designed for grinding and cutting various materials using appropriate discs.

Enstriksyon Sekirite Enpòtan

AVÈTISMAN: Li tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon yo bay zouti elektrik sa a. Si w pa swiv tout enstriksyon ki endike anba la yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

Jeneral Sekirite Zouti Pouvwa

• Sekirite Zòn Travay: Kenbe zòn travay la pwòp epi byen limen. Zòn ki dezòdone oswa ki fè nwa yo ka lakòz aksidan. Pa sèvi ak zouti elektrik nan atmosfè eksplozif, tankou lè gen likid, gaz oswa pousyè ki ka pran dife.
• Sekirite elektrik: Priz zouti elektrik yo dwe koresponn ak priz la. Pa janm modifye priz la nan okenn fason. Pa sèvi ak okenn adaptè pou priz ak zouti elektrik ki gen tè. Evite kontak kò ak sifas ki gen tè.
• Sekirite Pèsonèl: Always wear eye protection. Use hearing protection when operating the tool for extended periods. Wear a dust mask if operations create dust. Dress properly; do not wear loose clothing or jewelry. Keep hair and clothing away from moving parts.
• Itilizasyon zouti ak swen: Pa fòse zouti elektrik la. Sèvi ak zouti elektrik ki kòrèk la pou aplikasyon w lan. Dekonekte ploge a nan sous kouran an epi/oswa retire pake pil la, si li detachab, nan zouti elektrik la anvan ou fè nenpòt ajisteman, chanje akseswa, oswa sere zouti elektrik yo.
• Sekirite Espesifik pou Moulen: Always use guards. Ensure the guard is securely attached and positioned for maximum safety. Use only discs with the correct diameter and bore size. Never use damaged or incorrect discs.

Pwodwi souview

The Total TG1121256-3 Angle Grinder is a versatile tool for various grinding and cutting applications. Familiarize yourself with its components before operation.

Imaj 1: Total TG1121256-3 Angle Grinder. This image shows the main unit of the angle grinder, including the motor housing, gear head, spindle, disc guard, and the auxiliary side handle attached.

Eleman prensipal yo:

• Kò prensipal: Contains the motor and internal mechanisms.
• Axe: The rotating shaft where the grinding/cutting disc is mounted.
• Pwoteksyon disk: Pwoteje itilizatè a kont etensèl ak debri.
• Auxiliary Side Handle: Bay plis priz ak kontwòl pandan operasyon an.
• Pouvwa switch: Pou limen/etenn zouti a.
• Kontwòl vitès Dial: Adjusts the no-load speed (5000-12000 rpm).

Enstalasyon ak Asanble

1. Attaching the Auxiliary Side Handle

The auxiliary side handle can be screwed into one of the threaded holes on the gear housing, depending on your working preference (left or right-handed operation). Ensure it is tightened securely before use.

2. Enstale/Chanje Disk pou Broye/Koupe

1. Dekonekte pouvwa: Always unplug the tool from the power source before changing discs.
2. Gad Pozisyon: Adjust the disc guard to provide maximum protection for the task.
3. Blokaj aks pou peze a: Peze epi kenbe bouton bloke aks la pou anpeche aks la vire.
4. Desere nwa flanj lan: Sèvi ak kle ki vini ak li a pou dekole epi retire nwa flanj ekstèn lan.
5. Mete Disk la: Position the desired grinding or cutting disc onto the inner flange, ensuring it sits correctly on the spindle. The disc diameter should be 126mm (5 inches).
6. Sere Nwa Flanj lan: Replace the outer flange nut and tighten it firmly with the wrench while holding the spindle lock button. Do not overtighten.
7. Check Disc: Ensure the disc is properly seated and rotates freely without wobbling.

Opere moulen Ang lan

1. Koneksyon pouvwa

Connect the power cord to a suitable 220-240V~50/60Hz power outlet. Ensure the power switch is in the OFF position before plugging in.

2. Ajiste vitès

The angle grinder features a variable speed control dial. Rotate the dial to select the desired no-load speed between 5000 and 12000 RPM. Lower speeds are generally used for polishing or delicate work, while higher speeds are for aggressive grinding and cutting.

3. Kòmanse ak kanpe

• Komanse: Push the power switch forward to the ON position.
• Pou sispann: Push the power switch backward to the OFF position.

4. Teknik pou fanm ak wouye

• Manje: Hold the grinder firmly with both hands. Position the disc at a slight angle (15-30 degrees) to the workpiece. Apply moderate pressure and move the grinder smoothly across the surface.
• Koupe: For cutting, hold the grinder perpendicular (90 degrees) to the workpiece. Use a cutting disc and apply light, consistent pressure. Allow the disc to do the work. Avoid twisting or jamming the disc.
• Konpatibilite materyèl: Ensure the disc type is appropriate for the material being worked on (e.g., metal, stone).

Antretyen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan moulen ang ou a.

• Netwayaj: After each use, clean the tool with a dry cloth. Use compressed air to clear dust from ventilation openings. Do not use water or chemical cleaners.
• Enspeksyon Disk: Regularly inspect grinding and cutting discs for wear, cracks, or damage. Replace worn or damaged discs immediately.
• Bwòs kabòn: The carbon brushes may need replacement after extended use. This should ideally be performed by a qualified service technician.
• Depo: Sere zouti a nan yon kote ki sèk, an sekirite, kote timoun yo pa ka rive.

Depanaj

Espesifikasyon teknik

Garanti ak sipò

For warranty information and technical support, please refer to the warranty card included with your product or contact Total customer service. Keep your purchase receipt as proof of purchase for any warranty claims.