aigo ACSE240-BK

Aigo AC SE 240 Rainbow 240mm Water Cooler Instruction Manual

Model: ACSE240-BK

1. Pwodwi souview

The Aigo AC SE 240 is an all-in-one (AIO) liquid CPU cooler designed to provide efficient thermal management for your computer's processor. Featuring a 240mm radiator and two fans with Rainbow lighting, it offers effective cooling performance for a wide range of Intel and AMD sockets.

This manual provides essential information for the proper installation, operation, and maintenance of your Aigo AC SE 240 Water Cooler.

2. Pake kontni

Please verify that all components listed below are present in your package before proceeding with the installation.

Aigo AC SE 240 Water Cooler components including radiator, pump, fans, and mounting hardware

Imaj: All components included with the Aigo AC SE 240 Water Cooler, laid out on a white background. This includes the radiator with two fans, the CPU block/pump, tubing, various mounting brackets for Intel and AMD sockets, screws, thermal paste, and a fan/RGB controller.

  • 240mm Radiator with integrated pump/CPU block and tubing
  • Two 120mm Fans (Rainbow lighting)
  • Intel Mounting Bracket Kit (LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X)
  • AMD Mounting Bracket Kit (FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4)
  • Backplate for Intel sockets
  • Vis ak Distansè pou Monte
  • Paste tèmik
  • Fan/RGB Controller (if applicable, inferred from image)
  • Manyèl Itilizatè (dokiman sa a)

3. Gid Enstalasyon

This section provides general steps for installing the Aigo AC SE 240 Water Cooler. Refer to your motherboard and PC case manuals for specific instructions regarding component placement and cable management.

3.1 Prepare CPU a ak kat manman an

  1. Asire w ke sistèm ou an etenn epi dekonekte nan sous kouran an.
  2. Retire tout radyatè CPU ki deja egziste. Netwaye sifas CPU a byen avèk alkòl izopropilik pou retire ansyen pat tèmik la.
  3. Identify the correct mounting bracket for your CPU socket (Intel or AMD).

3.2 Enstale radyatè a ak vantilatè yo

Aigo AC SE 240 Water Cooler with rainbow fans

Imaj: The Aigo AC SE 240 Water Cooler showing the 240mm radiator with two fans attached, displaying their rainbow LED lighting. The pump/CPU block is connected via two braided tubes.

  1. Attach the two 120mm fans to the radiator using the provided long screws. Ensure the fan airflow direction is correct for your case (typically intake or exhaust).
  2. Mount the radiator assembly to an available 240mm fan mount in your PC case (e.g., top, front, or rear). Use the appropriate screws to secure it.

3.3 Install the CPU Block/Pump

  1. Apply a small amount of thermal paste to the center of your CPU's integrated heat spreader (IHS). A pea-sized dot is usually sufficient.
  2. Attach the correct mounting standoffs and brackets to your motherboard around the CPU socket. For Intel sockets, you may need to install the backplate first.
  3. Carefully place the CPU block/pump onto the CPU, aligning the mounting holes.
  4. Secure the CPU block/pump with the provided thumb screws or nuts, tightening them in a diagonal pattern until snug. Do not overtighten.

3.4 Konekte Cables

  1. Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard. If neither is available, use a SYS_FAN header.
  2. Connect the fan power cables to the CPU_FAN and/or SYS_FAN headers on your motherboard, or to the included fan/RGB controller.
  3. Connect the RGB cables from the fans and pump to the included RGB controller, and then connect the controller to an available RGB header on your motherboard (if applicable) or a SATA power connector.
  4. Organize cables for optimal airflow and aesthetics.

4. Operasyon Enstriksyon

Once installed, the Aigo AC SE 240 Water Cooler operates automatically. The pump and fans will adjust their speeds based on CPU temperature, as controlled by your motherboard's BIOS/UEFI settings or dedicated software.

  • Anviwònman BIOS/UEFI yo: Access your motherboard's BIOS/UEFI to configure fan curves and pump speed settings. It is recommended to set the pump to run at 100% speed for optimal cooling performance and to prevent air bubbles from settling.
  • Kontwòl lojisyèl: If your motherboard supports it, you may use manufacturer-provided software to fine-tune fan speeds, monitor temperatures, and customize RGB lighting effects.
  • Premye demaraj: During the first few minutes of operation, you might hear gurgling sounds as air bubbles are purged from the loop. This is normal and should subside.
Top view of Aigo AC SE 240 Water Cooler pump and radiator

Imaj: Yon tèt anba view of the Aigo AC SE 240 Water Cooler, highlighting the CPU block with its illuminated Aigo logo and the two rainbow-lit fans on the radiator.

5. Antretyen

Regular maintenance ensures optimal performance and longevity of your water cooler.

  • Netwayaj pousyè: Periodically clean dust from the radiator fins and fan blades using compressed air or a soft brush. Excessive dust can impede airflow and reduce cooling efficiency.
  • Enspeksyon Tib: Visually inspect the tubing and connections for any signs of leaks, kinks, or damage. Address any issues immediately.
  • Bri ponp: If the pump starts making unusual noises, it may indicate air trapped in the loop or a failing pump. Ensure the pump is running at full speed and try gently tilting your PC case to help dislodge air bubbles.

NAN. Depanaj

This section addresses common issues you might encounter with your Aigo AC SE 240 Water Cooler.

PwoblèmKòz posibSolisyon
Tanperati CPU ki wo
  • Move aplikasyon pat tèmik
  • CPU block not seated correctly
  • Pump not running or running too slow
  • Fans not spinning or spinning too slow
  • Radyatè bouche ak pousyè
  • Reaplike pat tèmik la
  • Reseat CPU block, ensure even pressure
  • Check pump power connection, set pump to 100% in BIOS
  • Check fan connections, configure fan curves in BIOS
  • Clean radiator fins
Fans/RGB not lighting up
  • Loose RGB cable connection
  • RGB controller not powered or faulty
  • Incorrect RGB header connection
  • Verify all RGB cables are securely connected
  • Ensure RGB controller has SATA power and is connected to motherboard
  • Check motherboard manual for correct RGB header type (e.g., 5V ARGB vs 12V RGB)
Unusual Pump Noise
  • Air bubbles in the loop
  • Ponp fonksyone byen
  • Gently tilt the PC case to help dislodge air bubbles. This may take some time.
  • Ensure pump is running at 100%. If noise persists and cooling is affected, contact support.

7. Espesifikasyon

Detailed technical specifications for the Aigo AC SE 240 Water Cooler.

  • Modèl: ACSE240-BK
  • Intel Socket Compatibility: LGA 2066/ 2011-v3 / 2011 / 1700 / 1366 / 1200 / 115X
  • AMD Socket Compatibility: FM1 / FM2 / FM2+ / AM2 / AM2+ / AM3 / AM3+ / AM4
  • Longè Tib: 395 mm
  • Vitès ponp: 3200 ± 10% RPM
  • Ponp Voltage: 12V
  • Dimansyon radyatè: 274 x 120 x 27 mm
  • Dimansyon fanatik: 120 x 120 x 25 mm
  • Vitès fanatik: 800 ~ 1800RPM
  • Airflow: 64.05 CFM
  • Nivo bri: 30 dBA ± 10%
  • TDP: 210W
  • Metòd refwadisman: Likid (Dlo)
  • Aparèy konpatib: Desktop

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please refer to the official Aigo websit la oubyen kontakte revandè w la. Kenbe prèv acha w la pou reklamasyon garanti a.

Official Aigo Websit: www.aigocooler.com (Nòt: Sa a se yon espas rezève URL. Please verify the actual official website for Aigo products.)

© 2024 Aigo. All rights reserved. Information subject to change without notice.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.