COUGAR MX360

COUGAR MX360 RGB Mid Tower Case Manyèl Enstriksyon

Model: MX360 RGB (CGR-5CC6G-RGB)

1. Entwodiksyon

Thank you for choosing the COUGAR MX360 RGB Mid Tower Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. The MX360 RGB combines a sleek design with ARGB LED strips on the front panel, offering excellent cooling performance and support for a wide range of components, including up to a 360mm radiator, 315mm graphics cards, and 170mm CPU coolers. Its compact layout and full-length PSU shroud contribute to a clean and organized build.

2. Enfòmasyon sou Sekirite

  • Toujou dekonekte ekipman pou kouran an nan priz miray la anvan ou enstale oswa retire nenpòt konpozan.
  • Handle components with care to avoid damage from static electricity. Consider using an anti-static wrist strap.
  • Kenbe ti pyès ak vis lwen timoun yo.
  • Ensure proper ventilation around the case to prevent overheating.
  • Pa eseye modifye bwat la oswa konpozan li yo, paske sa ka anile garanti a epi poze risk pou sekirite.

3. Pake kontni

Tanpri verifye ke tout atik sa yo enkli nan pakè ou a:

  • COUGAR MX360 RGB Mid Tower Ka
  • Bwat akseswa (ki gen ladan l vis, distansè, lyen kab, elatriye)
  • Manyèl Itilizatè (dokiman sa a)

4. Pwodwi souview

The COUGAR MX360 RGB case features a minimalist design with integrated ARGB lighting and a tempered glass side panel for showcasing your build.

COUGAR MX360 RGB Mid Tower Case, front-side view with internal components visible and RGB lighting.

Figi 4.1: Devan view of the COUGAR MX360 RGB case, showing the interior and active RGB lighting.

COUGAR MX360 RGB Mid Tower Case, front view montreasing the ARGB LED strips.

Figi 4.2: Devan view of the COUGAR MX360 RGB case, highlighting the integrated ARGB LED strips.

COUGAR MX360 RGB Mid Tower Case, side view highlighting the tempered glass panel.

Figi 4.3: Side view of the COUGAR MX360 RGB case, featuring the tempered glass panel.

COUGAR MX360 RGB Mid Tower Case, angled front view emphasizing the design and ARGB.

Figi 4.4: Devan angilè view of the COUGAR MX360 RGB case, showcasing its design and ARGB elements.

5. Enstalasyon ak Enstalasyon

Follow these steps to install your components into the COUGAR MX360 RGB case.

5.1 Prepare Ka a

  1. Mete bwat la sou yon sifas plat epi ki estab.
  2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear of the case and carefully sliding the panel off.
  3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

5.2 Enstalasyon mèr

  1. Enstale pwoteksyon E/S la (si li pa deja enstale sou kat manman w lan) nan ouvèti dèyè bwat la.
  2. Ensure the correct standoffs are installed for your motherboard form factor (ATX, Micro-ATX, Mini-ITX). Adjust or add standoffs as needed.
  3. Mete kat manman ou a ak anpil atansyon sou distans yo, aliyen twou vis yo.
  4. Sere kat manman an byen sere ak vis yo bay yo.

5.3 Enstalasyon Power Supply Unit (PSU).

  1. Locate the PSU shroud at the bottom of the case.
  2. Slide your PSU into the designated compartment from the rear of the case.
  3. Fikse PSU a ak vis nan dèyè bwat la.
  4. Route necessary cables through the cutouts in the PSU shroud for cable management.

5.4 Enstalasyon Disk Depo

The MX360 RGB supports various storage configurations.

  • Disk Difisil 3.5 pous: Install into the drive cage located under the PSU shroud.
  • 2.5" SSDs/HDDs: Mount onto the dedicated trays or mounting points behind the motherboard tray.

5.5 Enstalasyon Kat Grafik (GPU)

  1. Retire kouvèti fant PCIe ki nesesè yo nan dèyè bwat la.
  2. Mete kat grafik ou a nan plas PCIe ki apwopriye a sou kat manman an.
  3. Secure the graphics card with screws. The case supports graphics cards up to 315mm in length.

5.6 Cooling System Installation (Fans/Radiators)

The case supports up to six fans and a 360mm water cooling radiator.

  • Devan: Supports up to 3 x 120mm or 2 x 140mm fans, or a 240/280/360mm radiator.
  • Top: Supports up to 2 x 120mm or 2 x 140mm fans, or a 240/280mm radiator.
  • Dèyè: Supports 1 x 120mm fan.

Install fans or radiators using the provided screws, ensuring proper airflow direction.

5.7 Koneksyon Front Panel

Connect the front panel cables (USB, Audio, Power, Reset, LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact header locations.

5.8 ARGB Lighting Connection

The integrated ARGB LED strips on the front panel connect via a 5V/3Pin ARGB connector. Connect this cable to a compatible 5V/3Pin ARGB header on your motherboard to synchronize lighting effects with your system.

6. Opere Ka a

Once all components are installed and connected, replace the side panels. Power on your system using the power button on the top I/O panel. The ARGB lighting will illuminate, controlled by your motherboard's software or a dedicated ARGB controller if you have one installed.

7. Antretyen

Antretyen regilye ede asire pèfòmans optimal ak lonjevite konpozan PC ou yo.

  • Filtè Pousyè: The MX360 RGB includes removable dust filters (e.g., top, bottom). Periodically remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation).
  • Netwayaj enteryè: Use compressed air to remove dust from internal components like fans, heatsinks, and the motherboard.
  • Netwayaj eksteryè: Siye sifas eksteryè yo ak yon mou, damp twal. Evite pwodui netwayaj abrazif.

NAN. Depanaj

Si ou rankontre pwoblèm, gade etap depanaj komen sa yo:

  • Pa gen pouvwa: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check the PSU switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
  • Ekleraj ARGB pa fonksyone: Confirm the 5V/3Pin ARGB connector is correctly plugged into a compatible motherboard header. Check your motherboard's RGB software for control settings.
  • Surchof: Ensure all case fans are spinning and oriented correctly for optimal airflow. Check for dust buildup on filters and components. Verify CPU cooler and GPU cooler are properly installed.
  • Koneksyon ki lach: Re-seat all components (RAM, GPU, storage drives) and check all power and data cables.

9. Espesifikasyon

KarakteristikSpesifikasyon
MakCOUGAR
Non modèlMX360 RGB
Nimewo Modèl AtikCGR-5CC6G-RGB
Kalite KaMid Tower
Dimansyon (LxWxH)14.88 x 8.27 x 18.11 pous (378 x 210 x 460 mm)
Pwa atik10.56 liv (4.8 kilogram)
MateryèlTempered Glass, Fine Metal
KoulèNwa
Sipò pou plak mèrMini ITX / Mikwo ATX / ATX
Max. Longè kat grafik315 mm
Max. CPU Cooler Wotè170 mm
Sipò PSUEstanda ATX PS2
Metòd refwadismanLè / Dlo
Sipò pou radyatèFront: 360mm / 280mm / 240mm / 140mm / 120mm
Top: 280mm / 240mm / 140mm / 120mm
Dèyè: 120mm
Sipò fanatikDevan: 3 x 120mm / 2 x 140mm
Top: 2 x 120mm / 2 x 140mm
Dèyè: 1 x 120mm
Kondwi Bays3.5" HDD: 2
2.5" SSD: 2+2 (converted from 3.5" drive bays)
I/O PanelUSB 3.0 x 2, USB 2.0 x 1, Mic x 1, Audio x 1, RGB Button
Karakteristik espesyalARGB LED Strips, Full-length PSU Cover for Cable Hiding and Improved Airflow

10. Garanti ak sipò

COUGAR products are designed and manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official COUGAR websit la. Kenbe prèv acha ou pou reklamasyon garanti.

For technical support or further assistance, please visit the official COUGAR websit la oubyen kontakte depatman sèvis kliyan yo. Ou ka jwenn plis enfòmasyon ak resous sou COUGAR Store on Amazon.

© 2023 COUGAR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.