Focal Theva N°3-D Floorstanding Loudspeaker

1. Entwodiksyon

The Focal Theva N°3-D is a high-fidelity 3-way floorstanding loudspeaker designed for home cinema systems. It features Dolby Atmos® compatibility, achieved through a dedicated speaker driver positioned on the top of the cabinet. This driver reflects sound waves off the ceiling to create immersive 3D audio effects. This manual provides essential information for the proper setup, operation, and maintenance of your Theva N°3-D loudspeaker.

2. Enstriksyon Sekirite

Please read these safety instructions carefully before using your loudspeaker. Keep this manual for future reference.

• Plasman: Ensure the loudspeaker is placed on a stable, level surface to prevent tipping. Avoid placing it in direct sunlight, near heat sources, or in areas with high humidity.
• Vantilasyon: Do not block any ventilation openings. Allow adequate space around the loudspeaker for proper airflow.
• Pouvwa: Konekte loudspeaker la nan yon amplifier with appropriate power ratings. Exceeding recommended power can damage the speaker.
• Netwayaj: Disconnect the loudspeaker from the ampSèvi ak yon twal mou epi sèk. Pa sèvi ak pwodui netwayaj likid oswa ayewosòl.
• Sèvis: Do not attempt to service the loudspeaker yourself. Refer all servicing to qualified service personnel.
• Timoun: Keep packaging materials and small parts away from children to prevent choking hazards.

3. Pake kontni

Verifye ke tout konpozan yo prezan nan anbalaj la:

• Focal Theva N°3-D Floorstanding Loudspeaker (Model: FTHEVAN3LW-D)
• Griyaj (pre-enstale oswa separe)
• Manyèl Itilizatè (dokiman sa a)

Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte machann ou an.

4. Pwodwi souview

The Theva N°3-D loudspeaker incorporates advanced technologies for superior audio performance and immersive sound.

Karakteristik kle:

• 3-way floorstanding design, Dolby Atmos® compatible.
• Full-range speaker driver with directional baffle for precise Dolby Atmos® effects.
• Slatefiber technology for immersive and dynamic home cinema sound.
• TNF Tweeter for mellow treble reproduction.
• Time Alignment design for a focused sound image.

Eleman:

• Dolby Atmos® Driver: Located on the top, designed to reflect sound off the ceiling.
• TNF Tweeter: Aluminum/Magnesium inverted dome tweeter for high frequencies.
• Chofè Midrange: 6.5-inch (16.5cm) Slatefiber cone for balanced and precise mid-range.
• Woofers: Two 6.5-inch (16.5cm) Slatefiber cone woofers for powerful bass.
• Tilted Stand: Integrated stand for optimal Time Alignment.

Figure 1: Focal Theva N°3-D Product Sheet illustrating key components and features. This diagram shows the internal structure, driver types (TNF Tweeter, Slatefiber midrange, Slatefiber woofers), and the top-mounted Dolby Atmos driver with its directional baffle.

Figi 2: Close-up view of the top-mounted Dolby Atmos driver on the Focal Theva N°3-D loudspeaker. This driver is designed to project sound upwards for ceiling reflection, creating immersive 3D audio effects.

Figi 3: Detaye view of the Slatefiber cone material used in the midrange and woofer drivers of the Focal Theva N°3-D. This material contributes to dynamic and immersive sound reproduction.

Figure 4: Close-up of the TNF Tweeter, an Aluminum/Magnesium inverted dome, responsible for clear and mellow high-frequency reproduction in the Focal Theva N°3-D loudspeaker.

5. Enstalasyon

5.1 Plasman

Optimal placement is crucial for achieving the best sound performance from your Theva N°3-D loudspeakers, especially for Dolby Atmos effects.

• Enstalasyon Stereo: For a traditional stereo setup, place the loudspeakers equidistant from your primary listening position, forming an equilateral triangle.
• Home Cinema Setup: In a home cinema configuration, the Theva N°3-D speakers should be positioned as your front left and right channels. Ensure they are placed symmetrically relative to your screen and listening area.
• Dolby Atmos: The integrated upward-firing driver requires a reflective ceiling. Position the speakers so that the sound from the top driver can reflect off the ceiling and reach your listening position. Avoid placing them under sound-absorbing materials or very high ceilings that might diminish the effect.
• Distans soti nan miray yo: Experiment with the distance from the rear and side walls. Placing speakers too close to walls can overemphasize bass, while too far can reduce bass impact. A good starting point is 1-2 feet (30-60 cm) from the rear wall.

Figi 5: Egzample of a Focal Theva home cinema setup, demonstrating typical speaker placement for optimal sound dispersion and Dolby Atmos effects. Note the symmetrical positioning relative to the viewzòn nan.

5.2 Koneksyon

The Theva N°3-D loudspeakers connect to your amplifier using standard speaker cables.

• Seleksyon kab: Use high-quality speaker cables of appropriate gauge for the length required.
• Polarite: Ensure correct polarity (+ to + and - to -) when connecting the speaker terminals to your amplifier. Incorrect polarity will result in poor sound quality and imaging.
• Kalite Tèminal: The Theva N°3-D features binding posts that accept bare wire, spade connectors, or banana plugs.
• AmpChanèl lifier: Connect the main speaker terminals to the front left and right channels of your amplifier. For the Dolby Atmos effect, ensure your amplifier or AV receiver has dedicated height channels and connect the top-mounted driver terminals to these outputs. Consult your amplifier's manual for specific height channel connections.

Figi 6: Dèyè view of the Focal Theva N°3-D loudspeaker, showing the speaker terminals for connection to an amplifier. Note the separate terminals for the main drivers and the top-mounted Dolby Atmos driver.

6. Operasyon Enstriksyon

Once properly set up and connected, operating your Theva N°3-D loudspeakers is straightforward.

• Pouvwa sou: Asire w amplifier se limen epi li mete sou sous antre ki kòrèk la.
• Kontwòl Volim: Ajiste nivo volim sou ou amplifier. Start at a low volume and gradually increase it to a comfortable listening level.
• Materyèl Sous: For optimal Dolby Atmos experience, use content encoded with Dolby Atmos audio tracks.
• Peryòd enskripsyon: Loudspeakers typically require a break-in period of several hours of use to achieve their full sonic potential. During this time, the drivers will loosen up and perform optimally.

7. Antretyen

Proper care will ensure the longevity and performance of your loudspeakers.

• Netwaye kabinè a: Use a soft, dry, lint-free cloth to wipe the cabinet surfaces. For stubborn marks, a slightly damp Ou ka itilize yon twal, epi sèvi ak yon twal sèk apre sa. Evite pwodui netwayaj abrazif oswa solvan.
• Netwaye griyaj la: The fabric grille can be gently vacuumed with a soft brush attachment to remove dust.
• Swen Chofè: Evite touche kòn oratè yo oswa tweeter yo dirèkteman, paske sa ka lakòz domaj.
• Kondisyon anviwònman: Pwoteje oratè yo kont tanperati ekstrèm, imidite, ak limyè solèy dirèk.

NAN. Depanaj

If you encounter issues with your Theva N°3-D loudspeakers, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Focal customer support or your authorized dealer.

9. Espesifikasyon

Detailed technical specifications for the Focal Theva N°3-D Floorstanding Loudspeaker.

Figure 7: Dimensions diagram for the Focal Theva N°3-D loudspeaker, showing height (40.19"), depth (15.28"), and width (8.35").

10. Garanti ak sipò

10.1 Enfòmasyon sou Garanti

The Focal Theva N°3-D loudspeaker comes with a limited warranty. Please refer to the warranty card included with your product or visit the official Focal websit la pou wè kondisyon detaye konsènan pwoteksyon, dire, ak pwosedi pou reklamasyon yo.

10.2 Sipò pou Kliyan

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your authorized Focal dealer or visit the official Focal support websit:

• Fokal Websit: www.focal.com
• Enfòmasyon sou konsesyonè: Refer to your purchase receipt or the Focal website to locate an authorized dealer near you.