ASETEK Invicta Direct Drive Wheelbase 27Nm

1. Entwodiksyon

The ASETEK Invicta Direct Drive Wheelbase 27Nm is a high-performance steering system designed for PC sim racing. It delivers precise force feedback, replicating real driving experiences with exceptional accuracy and responsiveness. This manual provides essential information for the proper installation, operation, maintenance, and troubleshooting of your Invicta Wheelbase.

Karakteristik kle yo enkli:

• Teknoloji Direct Drive: Provides authentic and precise force feedback for an immersive racing experience.
• Segondè rezolisyon: Features a resolution of 0.000085 degrees, translating to approximately 4,000,000 steps per revolution for nuanced feedback.
• Anviwònman Customizable: Adjust steering range, force feedback, friction, and LED lights via the RaceHub software.
• Konstriksyon solid: Built with anodized extruded aluminum housing and premium components for durability.

2. Enstalasyon ak Enstalasyon

Follow these steps to properly set up your Invicta Direct Drive Wheelbase.

2.1 Debalaj ak Verifikasyon Konpozan

Carefully unpack all components and verify against the packing list. The box should contain:

1. Invicta™ Wheelbase
2. Bouton ON/OFF
3. Torque OFF Button
4. Ekipman pou pouvwa 400W
5. USB-C pou USB-A kab
6. Power Cord (EU, US, UK variants included)
7. Montaj pyès ki nan konpitè (enkli)

2.2 Monte Anpatman an

The Invicta Wheelbase requires secure mounting to a sim racing rig or desk. Use the provided mounting hardware and ensure the wheelbase is firmly attached to prevent movement during use. Refer to your rig's instructions for specific mounting points.

2.3 Konekte kab yo

1. Konekte a Ekipman pou pouvwa 400W to the wheelbase's PWR port and then to a suitable wall outlet using the appropriate regional power cord (110-240 V AC).
2. Konekte a USB-C pou USB-A kab from the wheelbase's USB port to an available USB port on your PC.
3. Konekte a Bouton ON/OFF epi Torque OFF Button to their respective ports on the wheelbase.
4. If using ASETEK pedals, connect them to the designated pedal port on the wheelbase.

2.4 Software Installation (RaceHub)

Download and install the latest version of the Asetek RaceHub software from the official Asetek SimSports website. RaceHub is essential for configuring your wheelbase, updating firmware, and customizing settings.

3. Operasyon Enstriksyon

3.1 Limen ak Off

To power on the wheelbase, press the Bouton ON/OFF. The wheelbase will initialize. To power off, press the Bouton ON/OFF again. Always ensure the wheelbase is powered off when not in use or when making physical connections.

3.2 Torque OFF Function

La Torque OFF Button is a safety feature that immediately disables force feedback. Press this button if you need to quickly stop all motor activity, for example, in an emergency or when adjusting your setup. Press it again to re-enable torque.

3.3 Using RaceHub Software

RaceHub is your primary interface for managing the Invicta Wheelbase. It allows you to:

• Create and Save Profiles: Configure specific settings for different cars, tracks, or racing conditions.
• Adjust Force Feedback: Fine-tune the strength and characteristics of the force feedback.
• Set Steering Range: Customize the maximum rotation of the wheel.
• Control LED Lights: Adjust the behavior and colors of the integrated LED lighting.
• Mizajou Firmware: Ensure your wheelbase has the latest performance enhancements and bug fixes.

Regularly check for RaceHub software and firmware updates to ensure optimal performance and compatibility.

4. Antretyen

Proper maintenance ensures the longevity and optimal performance of your Invicta Wheelbase.

• Netwayaj: Use a soft, dry cloth to clean the exterior of the wheelbase. Avoid abrasive cleaners, solvents, or excessive moisture.
• Jesyon kab: Ensure all cables are neatly routed and not under tension or pinched to prevent damage.
• Mizajou lojisyèl: Keep RaceHub software and wheelbase firmware updated. Check the Asetek SimSports website regularly for new versions.
• Pwovizyon pou pouvwa: Only use the original 400W power supply provided with the wheelbase. Using aftermarket power supplies may void your warranty and could damage the unit.
• Depo: When not in use for extended periods, store the wheelbase in a clean, dry environment, protected from dust and extreme temperatures.

NAN. Depanaj

If you encounter issues with your Invicta Wheelbase, refer to the following common solutions before contacting support.

5.1 No Power / Wheelbase Not Turning On

• Verify the power cable is securely connected to both the wheelbase and the wall outlet.
• Asire w ke priz miray la fonksyone byen.
• Tcheke ke la Bouton ON/OFF se peze.
• Confirm the 400W power supply is correctly connected.

5.2 No Force Feedback

• Asire w la Torque OFF Button is not active (LED should indicate torque is enabled).
• Check USB connection to the PC. Try a different USB port.
• Verify force feedback settings within RaceHub and your sim racing game.
• Restart the wheelbase and your PC.
• Ensure RaceHub software and wheelbase firmware are up to date.

5.3 Wheelbase Not Detected by PC / RaceHub

• Confirm the USB-C to USB-A cable is properly connected.
• Eseye yon lòt pò USB sou òdinatè w la.
• Restart your PC and the wheelbase.
• Reinstall the RaceHub software.
• Check Device Manager on Windows to see if the device is recognized (even with an error).

5.4 Unexpected Behavior / Calibration Issues

• Perform a calibration within RaceHub software.
• Reset settings to default in RaceHub and reconfigure.
• Ensure no other conflicting software or drivers are running.

6. Espesifikasyon

Below are the technical specifications for the ASETEK Invicta Direct Drive Wheelbase 27Nm:

7. Enfòmasyon sou Garanti

The ASETEK Invicta Direct Drive Wheelbase is covered by a manufacturer's warranty. Please refer to the official Asetek SimSports websit la pou jwenn tèm ak kondisyon garanti ki pi aktyèl ak detaye yo.

Nòt enpòtan: Using aftermarket power supplies with the Invicta Wheelbase will void the product warranty. Always use the original 400W power supply provided by Asetek SimSports.

For warranty claims or service, retain your proof of purchase and contact Asetek SimSports customer support.

8. Sipò pou Kliyan

For further assistance, technical support, or to report issues not covered in this manual, please contact Asetek SimSports customer support through their official channels:

• Websit: Visit the official Asetek SimSports websit pou FAQ, atik sipò, ak fòm kontak.
• RaceHub Software: Utilize the support features within the RaceHub application for software-related inquiries.

Always provide your product model (Invicta Direct Drive Wheelbase 27Nm) and any relevant error messages or descriptions of the issue when seeking support.