Sunco LED Shop Light Instruction Manual

1. Pwodwi souview

The Sunco LED Shop Light is a 4-foot, 40W (150W equivalent) integrated fixture designed for bright, efficient illumination in various indoor settings. It provides 4500 lumens of 6000K Daylight Deluxe light, suitable for workshops, garages, basements, and other spacious areas. This fixture is linkable, allowing up to four units to be connected for extended coverage. It supports both surface and suspension mounting for flexible installation.

Image 1.1: Key features of the Sunco LED Shop Light, highlighting its efficiency and linkability.

2. Enfòmasyon sou Sekirite

• Toujou dekonekte kouran an anvan enstalasyon, antretyen, oswa netwayaj.
• Asire sous pouvwa voltage koresponn ak egzijans aparèy la (120V).
• This fixture is designed for indoor use only and is not water resistant. Avoid installation in wet locations.
• Do not attempt to modify or disassemble the fixture. This may void the warranty and create safety hazards.
• Handle with care to prevent damage to the frosted cover and internal components.
• Si ou pa sèten sou nenpòt pati nan pwosesis enstalasyon an, konsilte yon elektrisyen kalifye.

3. Ki sa ki nan bwat la

Each Sunco LED Shop Light package includes the following components:

• LED Shop Light Fixture (Integrated with 5' cord and 10" pull chain switch)
• Materyèl aliye:
  • Hanging Chains (for suspension mount)
  • Screws and Wall Anchors (for surface mount)
  • Connectors (for linking multiple fixtures)

Image 3.1: Included components for installation, featuring both surface and hanging mount hardware.

4. Enstriksyon Enstalasyon

The Sunco LED Shop Light offers two primary installation methods: suspension (hanging) mount and surface (flush) mount. Choose the method best suited for your application.

4.1. Suspension (Hanging) Mount

1. Prepare Sifas Montage: Identify the desired location for your light fixture. Ensure the ceiling or beam can support the weight of the fixture.
2. Install Hanging Hooks: Screw the provided hanging hooks into the ceiling or beam at appropriate intervals to support the fixture evenly.
3. Attach Chains: Connect the hanging chains to the hooks and then to the mounting points on the fixture. Adjust the chain length to achieve the desired hanging height.
4. Konekte pouvwa: Plug the fixture's power cord into a standard 120V outlet. If connecting to an existing junction box, ensure power is off at the circuit breaker before wiring.

Imaj 4.1: Egzanpample of a hanging mount installation in a garage or workshop.

4.2. Surface (Flush) Mount

1. Make Pwen Montaj: Hold the fixture against the desired surface (ceiling or wall) and mark the locations for the mounting screws.
2. Fè twou pilòt: Drill pilot holes at the marked locations. If mounting into drywall, insert the provided wall anchors.
3. Aparèy sekirite: Align the fixture with the pilot holes and secure it using the provided screws.
4. Konekte pouvwa: Plug the fixture's power cord into a standard 120V outlet. If connecting to an existing junction box, ensure power is off at the circuit breaker before wiring.

4.3. Linking Multiple Fixtures (Daisy Chain)

You can connect up to 4 Sunco LED Shop Lights together to create an extended lighting system. This is ideal for larger areas requiring more comprehensive illumination.

1. Install First Fixture: Install the first LED shop light using either the suspension or surface mount method.
2. Connect Subsequent Fixtures: Use the provided linking connectors to attach additional fixtures to the end of the previously installed one. Ensure a secure connection.
3. Secure All Fixtures: Ensure all linked fixtures are securely mounted to the ceiling or wall using the appropriate hardware.
4. Pouvwa sou: Once all connections are secure and fixtures are mounted, plug the main power cord into an outlet. All linked fixtures will operate from a single power source and the pull chain switch on the first fixture.

Image 4.2: Multiple fixtures linked together for expanded lighting coverage.

5. Operasyon Enstriksyon

The Sunco LED Shop Light is equipped with a convenient pull chain switch for easy operation.

• Limen/Etenyen: Gently pull the chain switch located on the fixture to turn the light on or off. If multiple fixtures are linked, pulling the chain on the first fixture will control all connected lights.
• Kòd pouvwa: The fixture includes a 5-foot power cord for direct plug-and-play functionality.

Image 5.1: The integrated pull chain switch for simple operation.

6. Antretyen

The Sunco LED Shop Light is designed for minimal maintenance and a long lifespan of 50,000 hours.

• Netwayaj: Ensure the fixture is turned off and cool before cleaning. Use a soft, dry or slightly damp twal pou siye deyò a. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Ranplasman anpoul: This fixture features integrated LED tubes and does not require bulb replacement.
• Enspeksyon: Periodically inspect the power cord and mounting hardware for any signs of wear or damage. If damage is found, discontinue use and contact customer support.

Image 6.1: The long lifespan of the LED shop light ensures minimal maintenance.

NAN. Depanaj

If you encounter issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:

8. Espesifikasyon

Imaj 8.1: Dimansyonèl view of the LED shop light fixture.

9. Garanti ak sipò

Sunco Lighting bay yon Garanti manifakti 7 zan for this product, ensuring peace of mind regarding your purchase. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support.

• Sipò Kliyan: Refer to the contact information provided on the product packaging or the official Sunco Lighting websit.
• Resous sou entènèt: Vizite la Sunco Lighting Store on Amazon pou plis enfòmasyon sou pwodwi ak sipò.

Image 9.1: Sunco Lighting's commitment to quality and customer satisfaction.