JETBeam SF-R26
JETBeam SF-R26 Rechargeable Flashlight User Manual
1. Entwodiksyon
Mèsi pou acha aasing the JETBeam SF-R26 Rechargeable Flashlight. This manual provides detailed instructions for the safe and effective use, setup, operation, and maintenance of your flashlight. Please read this manual thoroughly before using the product and retain it for future reference.
2. Pwodwi souview
2.1 Karakteristik kle
- Segondè klète: Pwodiksyon maksimòm 1200 lumèn.
- Mòd miltip: LOW, MID, HIGH, TURBO, and STROBE modes for various lighting needs.
- Rechargeable: Compatible with 18650 rechargeable batteries and features direct USB charging.
- Endikatè batri: Integrated indicator displays remaining battery power.
- Konsepsyon dirab: IPX6 waterproof rating and efficient heat dissipation design for stable, long-term use.
- Gwosè kontra enfòmèl ant: Designed for portability and ease of handling.
2.2 Kontni pake a
- JETBeam SF-R26 Flashlight
- O-ring (Spare)
- Replacement Tail Switch Cover
- Braslè
- USB kab
- Manyèl Enstriksyon
Image 1: The JETBeam SF-R26 flashlight, showcasing its compact design and textured grip. The power button and charging port are visible on the side, and the JETBeam logo is near the bezel.
3. Enstalasyon
3.1 Enstalasyon batri
- Devise bouchon ke flach la.
- Insert one compatible battery (18650 or CR123A) with the positive (+) terminal facing towards the head of the flashlight.
- Vise bouchon ke a tounen byen.
Nòt: The SF-R26 is compatible with 18650 rechargeable batteries and CR123A batteries. RCR123A batteries are pa compatible and should not be used.
3.2 Chaje
The SF-R26 features a built-in USB charging function. To charge the battery:
- Ensure a compatible battery is installed inside the flashlight.
- Locate the USB charging port, typically covered by a rubber flap on the side of the flashlight.
- Connect the provided USB cable to the flashlight's charging port and to a USB power source (e.g., computer, wall adapter).
- Endikatè batri a pral montre estati chaj la.
4. Operasyon Enstriksyon
4.1 Power On/Off
- Pou limen: Press the side switch once.
- Pou etenn: Press and hold the side switch for approximately 1 second.
4.2 Seleksyon mòd
With the flashlight turned on, short press the side switch to cycle through the brightness modes:
- LOW (10 lumens)
- MID (100 lumens)
- HIGH (250 lumens)
- TURBO (1200 lumens)
The flashlight will remember the last used brightness mode (except STROBE) when turned off and on again.
4.3 Strobe Mode
To activate the STROBE mode, double-press the side switch quickly from any state (on or off). Press the switch again to return to the previous brightness mode or turn off the flashlight.
4.4 Endikatè batri
The integrated battery indicator light provides information on the remaining battery charge. The indicator will flash to communicate the battery level. Refer to the specific flashing patterns in the table below:
| Modèl Endikatè | Nivo batri |
|---|---|
| Solid vèt | Segondè (75-100%) |
| Flache vèt | Mwayen (25-75%) |
| Solid Wouj | Ba (10-25%) |
| Flache wouj | Critical (Below 10%) - Recharge Immediately |
5. Antretyen
- Netwayaj: Netwaye kò flach la avèk yon twal mou,amp twal. Pa sèvi ak pwodui netwayaj abrazif oswa solvang.
- O-bag: Periodically inspect the O-rings for wear and tear. Lubricate them with silicone grease to maintain the waterproof seal. Replace damaged O-rings with the provided spares.
- Fil: Keep the threads of the tail cap clean and lightly lubricated to ensure smooth operation and good electrical contact.
- Depo: If storing the flashlight for an extended period, remove the battery to prevent leakage and damage. Store in a cool, dry place.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Flach pa limen. | Low or depleted battery. Incorrect battery installation. Loose tail cap. | Recharge or replace battery. Ensure battery is inserted correctly (positive end towards head). Tighten tail cap. |
| Limyè ki soti a fèb oswa li ap tranble. | Low battery. Poor electrical contact. | Recharge battery. Clean battery contacts and threads. Ensure tail cap is tight. |
| Flashlight gets hot during use. | High brightness modes generate heat. | This is normal for high-output flashlights. The SF-R26 has a heat sink design. If it becomes excessively hot, switch to a lower mode. |
| Chaje USB a pa fonksyone. | USB cable faulty. Power source issue. Battery not installed. | Try a different USB cable or power source. Ensure battery is correctly installed. |
7. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Modèl | SF-R26 |
| Dimensions (Length x Diameter) | 142 mm x 34 mm |
| Pwa (san batri) | 109 g |
| Batri Konpatib | 1x 18650 (rechargeable) or 1x CR123A (non-rechargeable) |
| Incompatible Batteries | RCR123A |
| Mòd klète | BA: 10 lumèn MID: 100 lumèn Segondè: 250 lumèn TURBO: 1200 lumèn |
| Mòd espesyal | STROBE |
| Evalyasyon ki enpèmeyab | IPX6 |
| Sous pouvwa | Batri opere |
| Battery Type (Recommended) | Lityòm-ion (18650) |
8. Enfòmasyon sou Sekirite
- Do not shine the flashlight directly into eyes. The high lumen output can cause temporary vision impairment or permanent eye damage.
- Kenbe soti nan atenn timoun yo.
- Do not disassemble the flashlight head or modify the internal components, as this may damage the product and void the warranty.
- Use only recommended batteries. Improper battery use can lead to fire, explosion, or personal injury.
- Evite ekspoze flach la nan tanperati ekstrèm oswa nan limyè solèy dirèk pou peryòd pwolonje.
- Ensure the USB charging port cover is securely closed when not charging to maintain the waterproof rating.
9. Garanti ak sipò
Specific warranty details may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for detailed warranty information.
For technical support or inquiries, please contact the retailer or the official JETBeam customer service channels.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.