Edifier X2 True Wireless Bluetooth Headphones Earbuds User Manual

Entwodiksyon

Welcome to the user manual for your Edifier X2 True Wireless Bluetooth Headphones Earbuds. This guide provides detailed instructions on how to set up, operate, maintain, and troubleshoot your device to ensure optimal performance and a satisfying audio experience. Please read this manual thoroughly before using your earbuds.

Image: Edifier X2 earbuds and their charging case.

Enstalasyon

Ki sa ki nan bwat la

• Edifier X2 True Wireless Earbuds
• Ka chaje
• Chaje kab
• Manyèl itilizatè

Chaje ekoutè yo ak ka

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case. Connect the charging case to a power source using the provided USB cable. The indicator light on the case will show charging status. A full charge for the case typically takes approximately 2 hours. The earbuds provide up to 7 hours of playback on a single charge, with the charging case extending total playtime to 28 hours.

Image: Visual representation of charging times and total playback duration.

Pairing ak yon Aparèy

1. Open the charging case and remove both earbuds. The earbuds will automatically enter pairing mode, indicated by rapidly blinking red and blue LEDs.
2. Sou aparèy ou ki gen Bluetooth la (telefòn entelijan, tablèt, òdinatè), ale nan paramèt Bluetooth yo.
3. Chèche pou available devices and select "EDIFIER X2" from the list to connect.
4. Once connected, the earbud LEDs will turn off, and you will hear an audible confirmation.

For subsequent use, the earbuds will automatically reconnect to the last paired device when removed from the case, provided Bluetooth is enabled on the device.

Imaj: Egzample of pairing the Edifier X2 earbuds with a mobile device.

Enstriksyon Operasyon

Mete ekoutè yo

Gently insert the earbuds into your ears, ensuring a comfortable and secure fit. The ergonomic design is intended for long-lasting comfort and stability during various activities.

Kontwòl manyen

The Edifier X2 earbuds feature intuitive touch controls on each earbud. Refer to the table below for common functions:

Image: Detailed diagram of touch control gestures and their corresponding functions.

Fonksyon Rele

The Edifier X2 earbuds are equipped with dual microphones and advanced call noise reduction technology to ensure clear voice quality during calls, even in noisy environments. Use the touch controls to manage your calls.

Image: Illustrates the clear call quality provided by the earbuds' noise reduction feature.

Kalite son

Experience rich HiFi stereo sound delivered by the impressive 13mm large dynamic drivers. These drivers ensure a wide soundstage and balanced audio, allowing for an immersive listening experience.

Image: Cutaway diagram highlighting the 13mm large dynamic driver and Bluetooth 5.1 chip.

Antretyen

Netwayaj

To maintain optimal performance and hygiene, regularly clean your earbuds and charging case. Use a soft, dry, lint-free cloth to wipe down the surfaces. Avoid using abrasive materials or harsh chemicals. For the earbud grilles, gently remove any debris with a small, soft brush.

Rezistans dlo

The Edifier X2 earbuds feature an IPX54 water-resistant rating. This means they are protected against dust ingress and splashing water from any direction. They are suitable for use during workouts, running, or in light rain. However, they are not designed for submersion in water or exposure to pressurized water jets. Ensure the earbuds are dry before placing them back in the charging case.

Image: Earbuds shown with water droplets, emphasizing their IPX54 water-resistant capabilities.

Depanaj

• Ekoutè yo pa konekte: Ensure both earbuds are out of the case and fully charged. Turn off and on your device's Bluetooth. If issues persist, try resetting the earbuds (refer to manufacturer's websit la pou enstriksyon espesifik pou reyajiste si li pa nan manyèl la).
• Pa gen son ki soti nan youn nan ekoutè yo: Place both earbuds back into the charging case, close the lid, wait a few seconds, then take them out again. Check your device's audio balance settings.
• Pwoblèm chaj: Verifye kab chaje a byen konekte ak bwat la ak sous kouran an. Asire w ke kontak chaje yo sou ekoutè yo ak anndan bwat la pwòp epi san debri.
• Move kalite apèl: Ensure the microphones are not obstructed. Move closer to your connected device to improve signal strength.
• Koneksyon tanzantan: Reduce the distance between the earbuds and your device. Avoid environments with significant wireless interference.

Espesifikasyon

Garanti ak sipò

Edifier products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Edifier website. For technical support, frequently asked questions, or further assistance, please visit the Edifier support page or contact their customer service directly.

Ediktè Ofisyèl Websit: www.edifier.com