1. Entwodiksyon
Mèsi pou acha aasing the BRUNO Slit Light Aroma Mist. This ultrasonic aroma diffuser is designed to enhance your living space with pleasant aromas and a soothing light. Please read this manual thoroughly before use to ensure safe and optimal operation. Keep this manual for future reference.
2. Enfòmasyon sou Sekirite
- Do not use near heat sources, open flames, or in direct sunlight.
- Ensure the device is placed on a stable, flat surface to prevent tipping.
- Pa plonje inite prensipal la nan dlo oswa lòt likid.
- Use only clean tap water. Do not use distilled water, purified water, or chemical solutions.
- Only use 100% pure essential oils. Avoid synthetic fragrances or oils that may damage the unit.
- Kenbe lwen timoun ak bèt kay.
- Unplug the device before cleaning or refilling.
- Pa bloke priz vapè dlo a.
- If the device emits unusual sounds, smells, or smoke, unplug it immediately and contact customer support.
3. Pake kontni
Tanpri verifye ke tout atik yo prezan epi yo an bon kondisyon:
- BRUNO Slit Light Aroma Mist Main Unit (Model BOE113-BE)
- USB Cable (approx. 1.5m)
- Manyèl Itilizatè (dokiman sa a)
Nòt: A mobile battery and AC-USB adapter are not included. Please prepare a USB power source with a 5V1A output.
4. Pwodwi souview
Familiarize yourself with the components of your BRUNO Slit Light Aroma Mist.
Imaj: Devan view of the BRUNO Slit Light Aroma Mist in beige, showing the slit design and control buttons.
Image: Close-up of the control panel at the base of the diffuser, showing the power, mist, and light buttons.
Imaj: Anba view of the diffuser, highlighting the USB power input port and product label.
5. Enstalasyon
- Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
- Plasman: Place the aroma mist on a flat, stable, and water-resistant surface. Ensure it is not near any electronic devices or furniture that could be damaged by mist.
- Konekte pouvwa: Insert the small end of the provided USB cable into the USB port at the bottom of the diffuser. Connect the other end to a 5V1A USB power source (not included).
6. Operasyon Enstriksyon
- Ranpli tank dlo: Remove the top cover of the diffuser. Fill the water tank with clean tap water up to the MAX line. Do not overfill.
- Add Aroma Oil: Add 2-3 drops of 100% pure essential oil directly into the water tank. Adjust the amount based on your preference and the size of the room.
Image: A hand adding drops of essential oil into the water tank of the diffuser.
- Ranplase kouvèti: Securely place the top cover back onto the main unit.
- Power On/Mist Function: Peze bouton an pouvwa (⏻) once to turn on the device. The mist function will start in continuous mode. Press again to switch to intermittent mode. Press a third time to turn off the mist.
- Fonksyon limyè ki ap dirije: Peze bouton Limyè a (💡) once to turn on the LED light in bright mode. Press again to switch to dim mode. Press a third time to turn off the light.
Image: The BRUNO Slit Light Aroma Mist illuminated in a dark room, showcasing the light filtering through its slits.
- Otomatik fèmen: The device will automatically shut off when the water level is too low.
7. Antretyen
Regular cleaning helps maintain the performance and longevity of your aroma mist.
- Netwayaj chak jou: After each use, unplug the device. Empty any remaining water from the tank. Wipe the inside of the water tank and the ultrasonic plate with a soft, damp twal.
- Netwayaj chak semèn: For a more thorough cleaning, use a cotton swab dipped in white vinegar to gently clean the ultrasonic plate. Rinse the tank with clean water, being careful not to get water into the air outlet.
- Siye: Kite tout pyès yo seche nèt nan lè a anvan ou rasanble yo oswa sere yo.
- Depo: If not in use for an extended period, clean and dry the unit thoroughly, then store it in a cool, dry place.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Pa gen vapè oswa vapè fèb | Nivo dlo ki ba Plak ultrasons sal Sòti bwouya a bloke | Ranpli tank dlo Clean ultrasonic plate Clear mist outlet |
| Aparèy pa limen | Pa gen koneksyon pouvwa Faulty USB cable/adapter | Tcheke koneksyon USB Try a different USB cable or 5V1A adapter |
| Bri etranj | Ensifizan dlo Aparèy pa sou yon sifas ki plat | Ajoute dlo Mete sou yon sifas ki estab, ki plat |
| Dlo flit | Tank dlo twòp Cover not properly secured | Do not exceed MAX line Asire w kouvèti a byen fèmen |
9. Espesifikasyon
| Karakteristik | Deskripsyon |
|---|---|
| Nimewo Modèl | BOE113 |
| Koulè | Bèj |
| Dimansyon (pwodwi) | W91mm × H183mm (Diameter 91mm, Height 183mm) |
| Pwa | 300g |
| Materyèl | Polypropylene, ABS resin |
| Peyi orijin | Lachin |
| Konsomasyon pouvwa nominale | 5W |
| Metòd Imidifikasyon | À |
| Mòd operasyon yo | Kontinyèl / Entèmitan |
| Karakteristik sekirite | Automatic shut-off when water runs out |
| Fonksyon limyè | LED light (Bright / Dim) |
| Aroma Compatibility | Aroma oil compatible |
| Sous pouvwa | DC5V (USB) |
| Longè kòd | Apeprè. 1.5m |
| Pwodwi pou Telefòn | USB kab |
10. Garanti ak sipò
BRUNO products are manufactured to the highest quality standards. For warranty information, please refer to the warranty card included with your product or visit the official BRUNO website. If you encounter any issues or have questions not covered in this manual, please contact BRUNO customer support.
BRUNO Official Websit: bruno-inc.com