TORQUE Air Spring Bag Suspension Kit (TR2400)

1. Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your TORQUE Air Spring Bag Suspension Kit, model TR2400. This kit is designed to enhance the load-carrying capacity, stability, and ride quality of your vehicle by providing adjustable air support to the rear suspension. Proper installation and maintenance are crucial for optimal performance and safety.

2. Enfòmasyon sou Sekirite

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to your vehicle.

• Enstalasyon pwofesyonèl rekòmande: While designed for bolt-on installation, professional assistance is recommended if you are unfamiliar with automotive suspension systems.
• Sipò pou machin: Always use jack stands or a lift to securely support the vehicle when working underneath it. Never rely solely on a jack.
• Pwoteksyon je: Wear appropriate eye protection during installation.
• Presyon lè: Never exceed the maximum recommended air pressure of 100 PSI. Maintain a minimum of 5 PSI at all times to prevent damage to the air springs.
• Enspeksyon eleman: Regularly inspect all components for wear, damage, or leaks.
• Konpozan cho: Allow exhaust components to cool before working near them.

3. Pake kontni

Verify that all components listed below are present in your kit before beginning installation. If any parts are missing or damaged, contact customer service.

Eleman ki enkli:

• 2 x Air Bags
• Upper Brackets
• Lower Brackets
• Left Jounce Stop Bracket
• Right Jounce Stop Bracket
• Long 4x4 Spacer
• Short 4x4 Spacer
• 1/2" Spacer
• Bail Clamp
• Air Line Tubing (Red)
• Shield chalè
• Fuel Line Bracket
• All necessary Bolts, Nuts, Fittings, and Washers
• Inflation Valves
• Gid enstalasyon

4. Enfòmasyon sou konpatibilite

This TORQUE Air Spring Bag Suspension Kit (TR2400) is specifically designed for the following vehicles:

• 2005-2007 Ford F250 4WD (Rear Only)
• 2005-2007 Ford F350 4WD (Rear Only)

Enpòtan: Twous sa a se PA compatible with vehicles equipped with an in-bed hitch. Please ensure your vehicle matches these specifications for proper fitment and operation.

5. Enstalasyon ak Enstalasyon

The TORQUE Air Spring Bag Suspension Kit features a bolt-on installation process, requiring no frame drilling. All necessary hardware is included. For detailed, step-by-step instructions, please refer to the dedicated installation manual provided within your kit.

Pwen Enstalasyon Kle yo:

• Ensure the vehicle is safely supported and the wheels are chocked.
• Follow the torque specifications for all fasteners as outlined in the installation manual.
• Route air lines carefully, avoiding sharp edges, moving parts, and heat sources. Secure them with zip ties.
• Install inflation valves in an easily accessible yet protected location.
• After installation, inflate the air springs to 5 PSI and check for leaks using a soapy water solution.

6. Operasyon Enstriksyon

The air springs provide adjustable load support. Adjust the air pressure according to your load requirements to maintain a level ride and optimal handling.

Gid pou presyon lè a:

• Presyon minimòm: Always maintain a minimum of 5 psi in the air springs, even when unloaded. This prevents damage to the air springs.
• Presyon maksimòm: Pa depase 100 psi.
• Nivelman chaj: Inflate the air springs to achieve a level vehicle stance when carrying a load or towing. This helps maintain steering control, braking effectiveness, and reduces bottoming out.
• Konfò nan woulib: Adjust pressure to find the optimal balance between load support and ride comfort. Higher pressure provides more support but can result in a firmer ride.

7. Antretyen

Regular maintenance ensures the longevity and optimal performance of your air spring suspension system.

• Enspeksyon chak mwa: Check air pressure monthly. Inspect air lines, fittings, and air springs for any signs of wear, cracks, or leaks.
• Lapwòpte: Keep the air springs and surrounding components free from dirt, debris, and corrosive materials.
• Air Line Integrity: Ensure air lines are securely fastened and not rubbing against any vehicle components.
• Presyon minimòm: Always maintain at least 5 PSI in the air springs to prevent damage.

8. Troubleshooting and Frequently Asked Questions

Seksyon sa a adrese kesyon ak pwoblèm komen ou ka rankontre.

Kesyon komen:

• Will it fit if my vehicle is lifted front and rear?
  If the front of the truck is lifted, it will fit. It does not affect the rear. If the rear of the truck is lifted, you may need a spacer. Refer to the spacer table below for guidance.
• Will it fit if my vehicle is lowered?
  No, this kit will PA fit if your vehicle is lowered.
• What should be the minimum and maximum PSI?
  Minimum is 5 psi. Maximum is 100 psi.
• Can I use a cradle?
  Yes, you can use a cradle with this kit. The compatible cradle part number is TR3004. You can search for the cradle by part number.

Spacer Selection Table:

You can search for spacers by part number.

9. Espesifikasyon

• Nimewo Modèl: TR2400AS + TR3004 (Kit includes TR2400AS, cradle TR3004 sold separately or as part of a kit)
• Ranplase nimewo pyès OEM yo: 2400, W21-760-2400, W217602400
• Kapasite Nivelman Chaj: Jiska 5,000 liv
• Minimòm presyon lè a: 5 psi
• Presyon lè maksimòm: 100 psi
• Enstalasyon: Bolt-on, No Drilling Required
• Pozisyon: Aks dèyè
• Air Inlet Material: 4140 Grade Steel (compared to OEM 1040 grade)
• Air Spring Durability: Designed to withstand up to 500 PSI (not recommended for operation above 100 PSI)
• Kit Weight: Apeprè 30 liv
• Dimansyon pake: 14 x 12 x 10 pous

10. Enfòmasyon sou Garanti

For specific warranty terms and conditions, please refer to the official documentation included with your product or visit the Torque websit. Garanti a anjeneral kouvri domaj fabrikasyon ak defo materyèl anba itilizasyon nòmal.

11. Sipò

Should you require technical assistance, have questions regarding installation, or need to report a missing/damaged part, please contact Torque customer service through their official channels. Contact information can typically be found on the product packaging or the manufacturer's websit.

Resous sou entènèt:

• Vizite la Torque Store on Amazon pou plis enfòmasyon sou pwodwi ak sipò.