Hiboom Hiboom-Silhouette-1240

Hiboom 16-inch Easter Egg Bunny Window Lights Instruction Manual

Model: Hiboom-Silhouette-1240

1. Entwodiksyon

Thank you for choosing the Hiboom 16-inch Easter Egg Bunny Window Lights. This product is designed to provide a festive and decorative lighting solution for your indoor or outdoor Easter celebrations. Featuring a classic Easter egg and bunny design with multi-colored LED lights, it offers various lighting modes controlled by a remote. Please read this manual carefully before installation and use to ensure proper operation and safety.

2. Enfòmasyon sou Sekirite

  • Sekirite elektrik: This product uses copper wires and electricity. Always handle with care and ensure proper electrical connections.
  • Sekirite timoun yo: Keep the product and its components, especially the copper wires, away from small children to prevent winding risks.
  • Plasman: Ensure the light is securely hung to prevent it from falling.
  • Sous pouvwa: Use only appropriate USB power adapters (not included) that meet safety standards.
  • Surchof: The 3-color copper wire lights are designed not to overheat after prolonged use, but always monitor the product during operation.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

  • 1 x Easter Egg Bunny Window Light (16 inches)
  • 1 x Remote Control (AAA battery included)
  • 1 x Suction Cup Hook
  • 1 x 10ft USB Power Cable (adapter plug not included)

4. Espesifikasyon

Dimansyon pwodwi16.93 x 10.04 x 0.79 pous
Pwa atik11.7 ons
MateryèlMetal frame, Copper wire
Koulè limyèWarm white, Pink, Green
Sous pouvwaUSB Plug Powered (10ft cable)
Kontwòl RemoteYes (AAA battery included)
Mod ekleraj8 mòd
Nimewo ModèlHiboom-Silhouette-1240

Note: Manual measurements may have slight errors.

5. Enstriksyon Enstalasyon

  1. Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
  2. Enspekte: Check the light for any visible damage.
  3. Mete ventouz la: Press the provided suction cup hook firmly onto a clean, smooth surface such as a window or wall. Ensure it is securely attached.
  4. Kwoke Limyè a: Hang the Easter Egg Bunny Window Light onto the suction cup hook. The light is designed with a sturdy metal frame for hanging.
  5. Konekte pouvwa: Plug the 10ft USB power cable into a compatible USB power adapter (not included) and then into a power outlet.
Diagram showing the dimensions of the Easter Egg Bunny Window Light, measuring 16 inches in height and 10 inches in width. Details of the 3-color rabbit in egg pattern frame, bold metal frame, and wrapped light cord with USB plug are also visible.
Figure 1: Product dimensions and key components. The light measures approximately 16 inches in height and 10 inches in width. It features a bold metal frame wrapped with 3-color copper wire lights and connects via a USB cord.
The Hiboom Easter Egg Bunny Window Light hanging on a window at night, illuminated with warm white, pink, and green lights. A child is looking at the light from inside, with a lantern and tea set on the windowsill.
Figure 2: The Easter Egg Bunny Window Light displayed in a window, showcasing its illuminated appearance at night.

6. Operasyon Enstriksyon

6.1 Limen/Etenyen

Once connected to a USB power source, the light will turn on. To turn off, disconnect from the power source or use the remote control.

6.2 mòd ekleraj

The Easter window light features 8 different lighting modes. You can switch between these modes using either the remote control or the power button located on the USB plug.

  • Konbinezon: Cycles through all modes.
  • Nan vag: Limyè yo limen nan yon modèl vag.
  • Sekansyèl: Lights turn on in sequence.
  • Slo Glo: Lights slowly glow on and off.
  • Chasing/Flash: Lights chase and flash.
  • Fade dousman: Limyè yo ap antre epi etenn tou dousman.
  • Twinkle/Flash: Lights twinkle and flash randomly.
  • Konstan sou: All lights remain continuously lit.
Image illustrating the 8 different lighting modes of the Hiboom Easter Egg Bunny Window Light. Each mode is represented by a pattern of colored dots, including Combination, In Wave, Sequential, Slo Glo, Chasing/Flash, Slow Fade, Twinkle/Flash, and Steady On. The image also shows the 10 ft power cord and mentions a built-in timer for 6 hours on and 18 hours off.
Figure 3: Visual representation of the 8 distinct lighting modes and the 10-foot USB power cord. The light also features a built-in timer function.

6.3 Fonksyon kontwòl Remote

The included remote control allows for convenient operation:

  • Seleksyon mòd: Cycle through the 8 lighting modes.
  • Ajisteman klète: Ogmante oswa diminye entansite limyè a.
  • Fonksyon revèy: Activate the built-in timer, which illuminates the light for 6 hours and then automatically turns it off for 18 hours, repeating the cycle.
Comparison of the Hiboom Easter Egg Bunny Window Light during night time (illuminated) and day time (unlit). The night view shows the light glowing with warm white, pink, and green LEDs, while the day view shows the unlit metal frame. Text indicates '8 Hours Auto On' and '18 Hours Off' for the timer function.
Figure 4: Day and night view of the light, demonstrating the timer function (6 hours on, 18 hours off).

6.4 Demonstrasyon Videyo

Video 1: A demonstration of the Hiboom Easter Egg Bunny Window Lights, showcasing its design, hanging mechanism, and various lighting modes in action. This video is provided by the seller, CRowRow.

7. Antretyen

  • Netwayaj: Gently wipe the light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or immerse in water.
  • Depo: When not in use, store the light in its original packaging or a protective container in a cool, dry place to prevent damage.
  • Ranplasman batri: If the remote control stops responding, replace the AAA battery.

NAN. Depanaj

  • Limyè pa limen:
    • Ensure the USB cable is securely plugged into both the light and a working USB power adapter.
    • Verify the power adapter is plugged into a live electrical outlet.
    • Tcheke si pil kontwòl remote la bezwen chanjman.
  • Kontwòl remote pa travay:
    • Ensure the remote control has a fresh AAA battery.
    • Point the remote directly at the USB receiver on the light.
  • Limyè yo fèb oswa yo ap flache:
    • Ensure the USB power source provides sufficient power.
    • Tcheke pou nenpòt koneksyon ki lach.

9. Garanti ak sipò

Specific warranty information for this product is not provided in the available data. For support or warranty inquiries, please contact the retailer or manufacturer directly using the contact information provided at the point of purchase.

© 2026 Hiboom. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.