AUA800U Optical Time Domain Reflectometer

1. Entwodiksyon

The Walfront AUA800U Optical Time Domain Reflectometer (OTDR) is a versatile and powerful instrument designed for the evaluation of FTTx and access network construction and maintenance. It integrates multiple functions including OTDR, Stable Light Source (LS), Optical Power Meter (OPM), Visual Fault Locator (VFL), and RJ45 cable testing capabilities. With its 4.3-inch touchable color display, it provides an intuitive interface for identifying fiber breaks, measuring optical cable lengths, and calculating relative optical power loss, ensuring efficient and accurate fiber optic network diagnostics.

2. Enfòmasyon sou Sekirite

Please read all safety warnings and instructions carefully before using the AUA800U OTDR. Failure to follow these instructions may result in injury or damage to the device.

• Sekirite lazè: This device contains a laser light source. Do not stare directly into the optical output port or view with optical instruments. Invisible laser radiation may be emitted.
• Sekirite batri: Use only the specified charging cable and plug. Do not disassemble, crush, or expose the built-in Li-battery to extreme temperatures or fire.
• Kondisyon anviwònman: Operate the device within the specified temperature and humidity ranges. Avoid exposure to dust, moisture, or corrosive substances.
• Manyen: Manyen aparèy la avèk prekosyon. Evite lage l oswa sibi gwo chòk.
• Antretyen: Refer to the maintenance section for cleaning and care instructions. Do not attempt to service the device yourself.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a. Si gen nenpòt atik ki manke oswa ki domaje, tanpri kontakte founisè ou a.

• 1 x Optical Time Domain Reflectometer (AUA800U)
• 1 x manyèl enstriksyon
• 1 x kab chaje
• 1 x ploge pouvwa
• 1 x SC Adapter
• 1 x RJ45 Receiver
• 1 x depo sak
• 1 x senti
• 1 x FC to LC Adapter
• 1 x Memory Card (pre-installed)

Figure 3.1: AUA800U OTDR with its complete set of accessories, including the main unit, storage bag, RJ45 receiver, charging cable, plug, and various adapters.

4. Pwodwi souview and Interfaces

Familiarize yourself with the main components and interfaces of the AUA800U OTDR.

Figure 4.1: Detailed diagram of the AUA800U OTDR's interfaces and controls. Key features include the 4.3-inch color LCD, VFL interface, OTDR/LS optical fiber interface, OPM interface, RJ45 interfaces (LAN1, LAN2), USB port, TF (Micro SD) card slot, and various control buttons (OK, SET, ESC, Direction keys, Power).

Figi 4.2: Close-up view of the optical interfaces on the AUA800U OTDR. These include the VFL Red Light Source Interface (1), OTDR/Stable Light Source Interface (2), OPM Optical Power Meter Interface (3), and an LED lamp Flashlight (4). Various adapters like FC and SC are shown for compatibility.

4.1 Dimansyon Fizik

Figure 4.3: Dimensions of the AUA800U OTDR unit, showing approximate measurements of 173mm (6.81in) in length, 109mm (4.29in) in width, and 45mm (1.77in) in height.

5. Enstalasyon

5.1 Chaje Aparèy la

The AUA800U OTDR has a built-in 3.7V, 4000mAh Li-battery. Before first use, ensure the device is fully charged.

1. Connect the charging cable to the Type-C USB port on the device.
2. Connect the other end of the charging cable to the provided power plug and plug it into a standard electrical outlet.
3. The charging indicator light will illuminate during charging. It will change or turn off once charging is complete.

5.2 Installing Batteries for RJ45 Receiver

The RJ45 Receiver requires 2 x AAA batteries (not included).

1. Open the battery compartment on the RJ45 Receiver.
2. Mete 2 pil AAA, asire w polarite ki kòrèk la (+/-).
3. Fèmen lòj batri a byen.

5.3 Limen/Etenyen

Press and hold the power button (usually located near the bottom right of the screen) for a few seconds to turn the device on or off.

6. Operasyon Enstriksyon

The AUA800U OTDR features a 4.3-inch touchable color display for easy navigation and operation. The main interface provides access to various functions.

Figure 6.1: The main interface of the AUA800U OTDR, displaying icons for various functions such as Auto OTDR, Expert OTDR, Event Map, OPM, VFL, Laser Source, Loss Test, RJ45 Length, RJ45 Sequence, RJ45 Tracking, End Face Detection, File Management, and System settings.

6.1 OTDR Functions (Auto OTDR, Expert OTDR, Event Map)

The OTDR function is crucial for fiber optic cable testing, identifying breaks, and measuring lengths.

Figure 6.2: Screenshots illustrating the interfaces for Auto OTDR, Expert OTDR, Event Map, and OPM functions. These show graphical representations of fiber attenuation, event lists, and power measurements.

6.1.1 Auto OTDR

This mode simplifies testing by automatically setting parameters.

• From the main menu, select 'Auto OTDR'.
• Just set the wavelength and measurement time. Other parameters are automatically selected by the instrument.
• Press 'AutoTest' to begin the test.

Figure 6.3: The Auto OTDR test function screen, showing the graph of the fiber optic cable, settings, zoom, cursor A, and file options. The user only needs to set wavelength and measurement time.

6.1.2 Expert OTDR

For advanced users, this mode allows manual configuration of test parameters.

• Select 'Expert OTDR' from the main menu.
• Manually set parameters such as wavelength, test range, and pulse width.
• Press 'AutoTest' to start the test.

6.1.3 Kat Evènman

The Event Map function provides a graphical representation of events along the fiber.

• Select 'Event Map' from the main menu.
• The function automatically tests and displays information such as total length, total loss, slope, and the number of events.
• Fusion points and breakpoints are graphically displayed for easy identification.

6.2 VFL (Visual Fault Locator)

The VFL function emits a visible red laser light to quickly locate breaks, bends, or poor connections in fiber optic cables over short distances.

Figure 6.4: Screenshots showing the VFL, Laser Source, and File Operation interfaces. The VFL screen indicates open/closed status and frequency options (1Hz, 2Hz). The Laser Source screen shows wavelength and operating modes. The File Operation screen displays saved test files.

• Select 'VFL' from the main menu.
• Connect the fiber to the VFL Red Light Source Interface (2.5mm universal SC, FC, ST).
• Choose 'Open' to turn on the VFL. You can select 1Hz (flashes at 1Hz) or 2Hz (flashes at 2Hz) modes.
• Select 'Close' to turn off the VFL.

6.3 Laser Source (Stable Light Source)

The stable light source function provides a continuous optical signal for loss measurement.

• Select 'Laser Source' from the main menu.
• Connect the fiber to the OTDR or Stable Light Source Interface.
• Choose 'Open' to activate the laser source.
• Select the desired wavelength (e.g., 1310nm, 1550nm) and operating mode (CW, 270Hz, 330Hz, 1KHz, 2KHz).
• Select 'Close' to turn off the laser source.

6.4 OPM (Optical Power Meter)

The OPM function measures the optical power of a fiber optic signal.

• Select 'OPM' from the main menu.
• Connect the fiber to the OPM Optical Power Meter Interface (2.5mm universal SC, FC, ST).
• The device will display the measured optical power in dBm.
• You can adjust the wavelength and set reference values if needed.

6.5 RJ45 Cable Testing Functions

The AUA800U OTDR includes functions for testing RJ45 network cables.

Figure 6.5: The RJ45 cable testing interface, showing options for line seeking (tracking), line sequence measurement, and line length measurement. The remote RJ45 unit is also depicted.

6.5.1 RJ45 Line Seeking/Tracking

• Connect one end of the RJ45 cable to the LAN1 or LAN2 port on the OTDR.
• Use the RJ45 Receiver to trace the cable and locate it.

6.5.2 RJ45 Line Sequence Measurement

• Connect the RJ45 cable to the LAN1 or LAN2 port and the remote RJ45 unit.
• The screen will display the wiring sequence (e.g., T568A, T568B) and identify any miswires or open circuits.

6.5.3 RJ45 Line Length Measurement

• Connect the RJ45 cable to the LAN1 or LAN2 port and the remote RJ45 unit.
• The device will measure and display the length of the RJ45 cable.

6.6 File Operasyon yo

The AUA800U OTDR allows you to save, open, delete, and rename test files.

• Select 'File Management' from the main menu.
• All test curves are saved on the pre-installed memory card.
• You can browse the list of saved files, select them, and perform operations like 'Open', 'Delete', or 'Rename'.

7. Antretyen

Proper maintenance ensures the longevity and accuracy of your AUA800U OTDR.

• Netwayaj: Use a soft, dry, lint-free cloth to clean the device's exterior. For the screen, use a screen-specific cleaning solution if necessary.
• Optical Ports: Keep all optical ports clean and free of dust. Use specialized fiber optic cleaning tools (e.g., fiber optic cleaning pens or wipes) to clean the connector interfaces before each use. Dust and debris can significantly affect measurement accuracy.
• Depo: When not in use, store the device in its provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.
• Swen batri: If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan. Recharge periodically if stored for very long durations.
• Evite enpak: Protect the device from drops and strong vibrations.

NAN. Depanaj

This section addresses common issues you might encounter with the AUA800U OTDR.

9. Espesifikasyon

Detailed technical specifications for the AUA800U Optical Time Domain Reflectometer.

10. Garanti ak sipò

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Walfront customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, you may visit the Walfront Store on Amazon: Walfront Amazon Store