1. Entwodiksyon
Thank you for choosing the Lepro Solar Spotlights Outdoor 4-Pack. This manual provides essential information for the safe and efficient use of your solar spotlights. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: Lepro Solar Spotlights Outdoor 4-Pack
2. Enfòmasyon sou Sekirite
- Ensure the solar panel is exposed to direct sunlight for optimal charging.
- Pa jete pil nan dife, paske yo ka eksploze.
- Kenbe pwodwi a lwen materyèl ki ka pran dife.
- Do not attempt to disassemble or modify the product. Contact customer support for assistance.
- Avoid placing the light in areas prone to heavy shading or under other light sources at night, as this may interfere with the automatic dusk-to-dawn function.
3. Pake kontni
Verifye ke tout konpozan yo prezan nan pake a:
- 4 x Lepro Solar Spotlights
- 4 x Pye tè
- 8 x Vis
- 8 x Plastic Bolts (Wall Anchors)
- 1 x manyèl itilizatè
Figure 2: Included components and product dimensions.
4. Enstalasyon ak Enstalasyon
4.1 Premye chaj
Before first use, ensure the solar spotlights are fully charged. Place the lights in direct sunlight for 6-8 hours with the power button switched to either low or high brightness mode. The lights will automatically charge during the day.
Figure 3: Automatic charging during the day and illumination at night.
4.2 Chwazi yon kote enstalasyon
Select a location where the solar panel can receive maximum direct sunlight for at least 6-8 hours daily. Avoid areas under eaves, trees, or other obstructions that may block sunlight or cast shadows.
4.3 Metòd Enstalasyon
The Lepro Solar Spotlights offer two installation options:
- Mòn tè: Attach the ground stake to the bottom of the spotlight. Insert the assembled light firmly into soft ground in your garden, pathway, or lawn.
- Mi Mount: Use the provided screws and plastic bolts to secure the spotlight to a wall, fence, or other vertical surface. Ensure the mounting surface is stable and can support the light's weight.
Figure 4: Versatile installation for ground or wall mounting.
4.4 Adjusting the Solar Panel and Light Head
The solar panel and light head can be adjusted independently to optimize sunlight absorption and light direction:
- The solar panel can be adjusted vertically up to 135 degrees to capture maximum sunlight.
- The light head offers a beam angle of 120 degrees and can also be adjusted to direct illumination where needed.
Figure 5: Adjustable solar panel for optimal sunlight exposure.
5. Operasyon Enstriksyon
5.1 Power Button and Brightness Modes
Locate the power button on the back of the light head. Press the button to cycle through the operating modes:
- Premye laprès: Aktive Mòd klète segondè (120 Lumens, up to 11 hours illumination).
- Dezyèm Press: Chanje nan Low Brightness Mode (50 Lumens, up to 15 hours illumination).
- Twazyèm Press: Turns the light OFF.
Figure 6: Power button and brightness mode selection.
5.2 Automatic Dusk-to-Dawn Operation
Once a brightness mode is selected, the light will operate automatically. It will charge during daylight hours and illuminate automatically at dusk, turning off at dawn. No manual intervention is required daily.
6. Antretyen
6.1 Netwayaj
Regularly clean the solar panel surface to ensure optimal charging efficiency. Use a soft, damp cloth to wipe away dust, dirt, or debris. Avoid abrasive cleaners or harsh chemicals.
6.2 Rezistans move tan
The Lepro Solar Spotlights are designed with an IP65 waterproof rating, making them resistant to rain, snow, and various outdoor conditions. The durable ABS+PC materials ensure longevity.
Figure 7: IP65 waterproof and weather-resistant design.
NAN. Depanaj
- Limyè a pa limen lannwit:
- Ensure the power button is set to either Low or High brightness mode.
- Verify the solar panel is receiving sufficient direct sunlight (6-8 hours daily).
- Check if the light is placed near other strong light sources at night, which might trigger the light sensor to keep it off.
- Light duration is shorter than expected:
- The solar panel may not be receiving enough direct sunlight. Adjust its position or clear any obstructions.
- Cold weather or cloudy days can reduce charging efficiency and battery performance.
- Ensure the solar panel is clean from dirt or debris.
- Light flickers or is dim:
- The battery charge may be low. Allow for a full day of charging.
- Ensure connections are secure (if applicable, though this model is integrated).
8. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | PR510005-DW-4 |
| Mak | Lepro |
| Sous limyè | 43 dirije |
| Tanperati Koulè | 6500K lajounen blan |
| Brightness (High Mode) | 120 Lumen |
| Brightness (Low Mode) | 50 Lumen |
| Illumination Time (High Mode) | Jiska 11 èdtan |
| Illumination Time (Low Mode) | Jiska 15 èdtan |
| Batri | 1 batri ityòm metal (enkli) |
| Sous pouvwa | Solè Powered |
| Rezistans dlo | IP65 ki enpèmeyab |
| Materyèl | Acrylonitrile Butadiene Styrene, Polystyrene |
| Kalite enstalasyon | Wall Mount, Ground Mount |
| Dimansyon pwodwi | 16.7L x 10.4W x 32.8H santimèt |
| Kantite Atik | 4-Pake |
9. Garanti ak sipò
9.1 Garanti manifakti a
Pwodwi sa a kouvri pa yon Garanti manifakti 1 zan from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9.2 Sipò pou Kliyan
For any questions, concerns, or warranty claims, please contact Lepro customer support:
- Telefòn: +1 833-433-1453
- Sou entènèt: Visit the official Lepro website or your retailer's support page for further assistance.