Entwodiksyon
Thank you for choosing the CaDA C51043W Technics Buggy Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your remote control car. Please read this manual thoroughly before use to ensure proper function and safety.
Pwodwi souview
The CaDA C51043W is a 522-piece building block set designed to construct an all-terrain remote control buggy. It features a 2.4 GHz 4-channel remote control system, a suspension system, and a high-horsepower motor for dynamic performance. The assembled model is compatible with Lego Technic components.
Figure 1: Assembled CaDA C51043W Technics Buggy with its remote control.
Kontni pake
Verifye ke tout konpozan ki nan lis anba a yo prezan nan pake ou a:
- 1 x Spare parts pack (522 building blocks)
- 1 x kontwòl remote
- 1 x Manyèl itilizatè (dokiman sa a)
- 1 x Battery pack (JV1010/7.4V Lithium battery)
- 1 x USB chaje kab
- 1 x Servo motor
- 1 x L motor
Figi 2: Plis paseview of the main components included in the package, such as the remote control, motors, battery box, and USB cable.
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | C51043W |
| Kantite moso | 522 |
| Materyèl | Plastic + Hard parts |
| Frekans kontwòl Remote | 2.4 GHz |
| Distans kontwòl Remote | Apeprè 25 mèt |
| Vitès maksimòm | 4.1 km/h |
| Tan Itilizasyon | 30 minit |
| Tan pou chaje | 4-6 hours (First charge: 8 hours) |
| Machin batri | JV1010/7.4V Lithium battery |
| Batri kontwòl Remote | 2 x AAA JV8011/1.5V batteries (not included) |
| Pwa pwodwi | 1280 gram |
| Dimansyon rasanble (L x W x H) | Apeprè 34.7 x 20.8 x 13.5 cm (13.75 x 8.2 x 5.3 pous) |
Figure 3: Key dimensions of the assembled buggy.
Enstalasyon
1. Asanble
Follow the included intuitive instruction manual for step-by-step assembly. The pieces are packed in numbered bags to simplify the building process. Ensure all connections are secure.
Figi 4: Devan view of the fully assembled buggy.
2. Enstalasyon ak Chaje Batri
- Batri machin: Install the JV1010/7.4V Lithium battery pack into the designated compartment in the buggy. Connect it securely.
- Chaje: Use the provided USB charging cable to charge the car's battery. The first charge should be approximately 8 hours. Subsequent charges will take 4-6 hours. Do not overcharge.
- Batri Remote Control: Insert 2 x AAA JV8011/1.5V batteries (not included) into the remote control. Ensure correct polarity.
Enstriksyon Operasyon
1. Power On/Off
- Turn on the power switch on the buggy.
- Limen bouton pouvwa a sou kontwòl remote la.
- The remote control and buggy should automatically pair. If not, refer to the troubleshooting section.
2. Kontwòl debaz yo
The 4-channel remote control allows for precise movement:
- Avant/Atè: Use the left joystick to move the buggy forward or backward.
- Left/Right Turn: Use the right joystick to steer the buggy left or right.
- Limyè: The remote control may have a button to control the buggy's lights.
Figure 5: The buggy with its headlights on, ready for operation.
3. Konsèy pou Kondui
- Operate on flat, clear surfaces for optimal performance.
- Avoid water, sand, or excessively dusty environments to prevent damage to electronic components.
- Practice gentle steering and acceleration to master control.
Antretyen
1. Netwayaj
Wipe the buggy with a soft, dry cloth after each use to remove dust and debris. Do not use water or chemical cleaners.
2. Depo
Store the buggy and remote control in a cool, dry place away from direct sunlight. Remove batteries from the remote control if storing for extended periods.
3. Swen batri
- Always fully charge the car battery before use.
- Pa kite pil chaje poukont li.
- If the battery is damaged or leaking, discontinue use immediately and dispose of it properly.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Buggy does not respond to remote control. | Low battery in buggy or remote control; Not paired; Out of range. | Charge buggy battery; Replace remote control batteries; Ensure buggy and remote are powered on and within 25m range. |
| Buggy moves slowly or inconsistently. | Low buggy battery; Obstruction in wheels/gears. | Charge buggy battery; Check for and remove any obstructions. |
| Limyè yo pa mache. | Loose connection; Damaged LED. | Check wiring connections for the lights; Contact support if damaged. |
Garanti ak sipò
Each piece of this product undergoes quality inspection before shipment. If any part is missing or defective upon arrival, please circle the missing part in the instruction manual and send a picture to our customer support for a free replacement. Please retain your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided on the product packaging or the official CaDA websit.