Mitutoyo 543-783B-10 ID-S1012EXB Digital Indicator Instruction Manual

1. Pwodwi souview

The Mitutoyo ABSOLUTE Digimatic ID-S indicators are designed for precise measurement of short linear distances. They feature an impact-resistant LCD display for clear readings. This manual provides essential information for the proper setup, operation, and maintenance of your ID-S1012EXB Digital Indicator.

Karakteristik kle

• ABSOLUTE (ABS) Linear Scale: Eliminates the need to set the origin point each time the indicator is powered on.
• SPC Output Function: Enables quick and easy real-time data management.
• Fonksyon: Includes Origin set, zero set, Go/No-Go judgment, counting direction switching, power On/Off, data output, and inch/mm conversion (on inch/metric models).
• Origin Reset Not Required: Data remains even after temporary disappearance due to insufficient illumination.
• Glare-free Flat Crystal Face: Allows easy reading of graduations. Accuracy: 8 µm/ graduation: 0.01 mm/ dial reading: 0-40-1.
• O-ring Seal on Bezel: Provides smooth rotation and prevents dust and oil from penetrating to the dial face.
• Multi-layer Coatings: Applied to the crystal for enhanced durability and visibility.

2. Konpozan ak Asanblaj

Familiarize yourself with the components of your Mitutoyo Digital Indicator before assembly and operation.

Figi 1: Devan view of the Mitutoyo ID-S1012EXB Digital Indicator. This image shows the main body of the indicator with its digital display and measurement probe.

Figi 2: Eksploze view of the Mitutoyo ID-S1012EXB Digital Indicator and its accessories. This image displays the indicator, various mounting accessories, and a stand, illustrating how the components fit together.

Enstalasyon batri

The indicator requires a silver oxide battery (included). To install or replace the battery:

1. Locate the battery compartment cover on the back of the indicator.
2. Ak anpil atansyon retire kouvèti a.
3. Insert the silver oxide battery with the correct polarity (+/-).
4. Ranplase kouvèti lòj batri a byen.

Monte Endikatè a

The indicator can be mounted using its 3/8 inch stem. Ensure it is securely fastened to a suitable stand or fixture for stable measurements.

3. Operasyon Enstriksyon

Follow these steps for accurate measurement using your digital indicator.

Power On/Off

• Peze a ON/OFF button to power the indicator on or off.
• Due to the ABSOLUTE linear scale, the origin point does not need to be reset upon power-on.

Zewo Anviwònman

1. Position the indicator's contact point against the reference surface or workpiece.
2. Peze a ZERO/ABS button to set the current position as the zero reference.

Origin Setting (Absolute Mode)

The ABSOLUTE system retains the origin point even when the power is off. If the origin needs to be re-established (e.g., after battery replacement or significant displacement):

1. Move the spindle to the desired origin position.
2. Peze epi kenbe la ORIJIN button until the display shows "0.000".

Inch/Millimeter Conversion

For inch/metric models, press the NAN/MM button to switch between inch and millimeter display units.

Go/No-Go Judgment

Refer to the specific instructions for setting upper and lower tolerance limits for Go/No-Go judgment, typically found in the full product manual or through the device's interface.

Data Output (SPC)

The SPC output function allows for data transfer to external devices for analysis. Connect the appropriate SPC cable (sold separately) to the data output port on the indicator and your data collection system. Follow the instructions provided with your SPC software for data acquisition.

4. Antretyen

Proper maintenance ensures the longevity and accuracy of your Mitutoyo Digital Indicator.

• Netwayaj: Wipe the indicator with a clean, dry, soft cloth. Avoid using solvents or abrasive cleaners.
• Depo: Store the indicator in its protective case in a dry, dust-free environment when not in use.
• Batri: Replace the battery promptly when the low battery indicator appears. Remove the battery if the indicator will not be used for an extended period.
• Enspeksyon: Regularly inspect the contact point and spindle for wear or damage.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre.

6. Espesifikasyon

Technical specifications for the Mitutoyo ID-S1012EXB Digital Indicator.

• Nimewo Modèl: ID-S112PXB2 (Note: Product title indicates ID-S1012EXB, but specifications list ID-S112PXB2. User should verify their specific model.)
• Presizyon Mezi: ±0.0010" / 0.02mm
• Pwa atik: 235 g
• Dimansyon pasèl: 19 x 10.9 x 7.5 cm
• Kantite pake atik: 1
• Eleman ki enkli: Indicator, Battery
• Kalite batri: oksid ajan

7. Videyo pwodwi

Gade videyo ofisyèl pwodui sa a pou yon vizyon plisview of the Mitutoyo Digital Indicator.

8. Garanti ak sipò

For warranty information, technical support, or service inquiries, please contact Mitutoyo customer service or visit the official Mitutoyo websit la. Kenbe resi acha ou kòm prèv acha.

Manifakti: Mitutoyo