Entwodiksyon
The mophie powerstation Go is a versatile portable device designed to provide power in various emergency situations. It functions as a car jump starter, a portable power bank for mobile devices, and a bright LED work light. This manual provides essential instructions for safe and effective use, maintenance, and troubleshooting of your powerstation Go.
Enfòmasyon sou Sekirite
Read all safety warnings and instructions before using this product. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Do not expose the powerstation Go to moisture or extreme temperatures.
- Pa eseye demonte oswa modifye aparèy la.
- Kenbe soti nan atenn timoun yo.
- Ensure proper polarity when connecting jumper cables to a vehicle battery. Incorrect connection can cause damage or injury.
- Use only the provided jumper cables and charging accessories.
- Evite ekspoze pwolonje a limyè solèy la dirèk.
- If the device becomes excessively hot, discontinue use immediately.
Kontni pake
- mophie powerstation Go
- Mini Jumper Cables
- Chaje Kab (USB-C USB-A)
- Manyèl itilizatè
Pwodwi souview
Familiarize yourself with the components of your mophie powerstation Go.
- Flach ki ap dirije: Located at one end, provides bright illumination.
- Limyè travay: Integrated into the body, offers broad area lighting.
- Bouton pouvwa: Aktive aparèy la epi tcheke estati batri a.
- Endikatè batri ki ap dirije: Montre nivo chaj ki rete a.
- USB-A Sòti Port: Pou chaje aparèy mobil yo.
- Pò Kab Jumper: Dedicated port for connecting the mini jumper cables.
- Pò Antre USB-C: For recharging the powerstation Go.
Setup: Initial Charging
Before first use, fully charge your mophie powerstation Go.
- Connect the provided USB-C charging cable to the USB-C input port on the powerstation Go.
- Connect the other end of the charging cable to a compatible USB wall adapter (not included) or a powered USB port.
- The LED battery indicator lights will illuminate and flash, indicating the charging status. All four lights will be solid when fully charged.
- Tan pou chaje ka varye selon sous pouvwa a.
Enstriksyon Operasyon
1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj
Ensure the powerstation Go is at least 50% charged before attempting to jump start a vehicle.
- Connect the mini jumper cables to the jumper cable port on the powerstation Go. Ensure a secure connection.
- Konekte a wouj clamp to the positive (+) terminal of the vehicle's dead battery.
- Konekte a nwa clamp to a metal part of the vehicle's chassis (unpainted, non-moving part) or the negative (-) terminal of the battery, if accessible and safe.
- Once connected, the powerstation Go will automatically perform safety checks. Wait for the indicator light on the jumper cable connector to turn solid green.
- Start your vehicle. If it doesn't start immediately, wait 30 seconds and try again. Do not attempt more than three consecutive jump starts.
- Once the vehicle starts, immediately disconnect the black clamp, then the red clamp, and finally disconnect the jumper cables from the powerstation Go.
2. Charging Mobile Devices
Use the USB-A output port to charge your smartphone, tablet, or other USB-powered devices.
- Connect your device's USB charging cable to the USB-A output port on the powerstation Go.
- The powerstation Go will automatically begin charging your device. The LED battery indicator lights will show the remaining charge.
- Dekonekte aparèy ou an yon fwa ou fin chaje l.
3. Using the LED Flashlight and Work Light
The powerstation Go features both a focused LED flashlight and a broad work light.
- To activate the LED Flashlight: Press and hold the power button for 2 seconds. Press again to cycle through modes (high, low, strobe, off).
- To activate the Work Light: Double-press the power button. Double-press again to cycle through modes (white, red, flashing red, off).
Antretyen
- Netwayaj: Siye aparèy la avèk yon twal mou epi sèk. Pa sèvi ak pwodui chimik ki agresif oswa materyèl abrazif.
- Depo: Store the powerstation Go in a cool, dry place away from direct sunlight. For optimal battery life, recharge the device every 3 months if not in regular use.
- Swen batri: The internal battery is not user-replaceable. Do not attempt to open the device.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Aparèy pa chaje | Charging cable or adapter faulty; port obstruction. | Try a different USB-C cable and wall adapter. Ensure ports are clean and free of debris. |
| Machin nan pa ka demarre ak lòt moun | Low powerstation Go charge; incorrect cable connection; severely dead battery. | Ensure powerstation Go is fully charged. Verify correct clamp polarity. Check vehicle battery for severe damage. Consult vehicle manual. |
| Mobile device not charging | Powerstation Go battery low; faulty USB cable; device incompatibility. | Recharge powerstation Go. Try a different USB cable. Ensure your device is compatible with standard USB charging. |
| Limyè pa travay | Powerstation Go battery low; incorrect button press. | Recharge powerstation Go. Refer to "Using the LED Flashlight and Work Light" section for correct operation. |
Espesifikasyon
- Mak: mophie
- Nimewo Modèl: mpsgrgd-FL36630
- Nimewo Pati Manifakti: 401107454
- Kapasite batri: 9900 mAh (36.6 Wh)
- Voltage: 12 Volts (for jump starting)
- Pwa pwodwi: 1.07 Kilogram
- Dimansyon: 30.3 x 24.69 x 10.79 cm (Pakè)
- Karakteristik espesyal: LED Indicator Lights, 450-lumen LED Flashlight, Spark-proof Jumper Cables
- Automotive Service Type: Truck, Car
Garanti ak sipò
For warranty information and customer support, please visit the official mophie websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou pou reklamasyon garanti.
Sipò sou entènèt: www.mophie.com/support
