Pumteck Electric Ball Pump

1. Entwodiksyon

Thank you for choosing the Pumteck Electric Ball Pump. This smart air pump is designed for fast and precise inflation of various sports balls, including footballs, basketballs, and volleyballs. Its portable and compact design, coupled with a digital LCD display and intelligent pressure detection, makes it an essential tool for athletes and sports enthusiasts.

Eleman ki enkli:

• Entelijan ponp boul
• Manyèl itilizatè
• Sak ki enpèmeyab
• Ball Needle (2 pieces)
• 10cm Air Hose
• USB Chaje Kab

2. Enstriksyon Sekirite Enpòtan

Tanpri li tout enstriksyon sekirite yo ak anpil atansyon anvan ou itilize aparèy la.

• Do not leave the device unattended during the inflation process.
• Keep the pump away from flammable or explosive materials.
• Avoid moistening the device with liquids or solvents.
• Do not store the product in a place that is too hot or too cold.
• Avoid accidentally touching the switch during use, which may cause the air pump to stop working before the ball is fully inflated.
• For the first use, it is recommended to test the most suitable PSI multiple times. The pump has a memory function and will save the last used PSI for the next power-on.

3. Enstalasyon

3.1 Chaje Ponp lan

Before first use, fully charge the Pumteck Electric Ball Pump. Connect the provided USB charging cable to the Micro USB port on the pump and to a compatible USB power source (e.g., wall adapter, computer USB port). A full charge takes approximately 2 hours. The battery indicator on the LCD display will show charging status.

3.2 Tache Pwodwi pou Telefòn

There are two primary ways to connect the inflation accessories:

1. Using the Air Hose: Connect one end of the 10cm air hose to the ball needle and the other end to the air outlet of the pump. Ensure all connections are secure to prevent air leaks.
2. Koneksyon dirèk: Directly screw the ball needle onto the air outlet of the pump.

After installing the accessories, it is advisable to test each connection point to ensure proper installation and check for any air leaks. If there is a leak, readjustments are necessary to ensure the pump obtains more accurate pressure, enhancing the inflation experience.

4. Operasyon Enstriksyon

4.1 Limen/Etenyen

• Pou limen: Press and hold the power button (center button) until the LCD display illuminates.
• Pou etenn: Peze epi kenbe bouton pouvwa a ankò jiskaske ekran an etenn.

4.2 Setting Desired PSI

The pump features a digital pressure gauge and LCD display. You can preset the desired PSI (Pounds per Square Inch) for your ball.

1. Once powered on, the display will show the current pressure (0.0 PSI if not connected) and a preset target pressure.
2. Use the "+" and "-" buttons to adjust the target PSI to your desired value. Refer to your ball's recommended PSI (usually printed near the valve).
3. Due to a possible 1 PSI error in the pressure sensor, it is recommended to add 1 PSI more than the expected value for better results when presetting.

4.3 Pwosesis Enflasyon an

1. Moisten the ball needle before inserting it into the ball's valve.
2. Fully insert the needle into the ball's valve.
3. Press the power button once to start inflation. The pump will display the real-time pressure as it inflates.
4. The pump will automatically stop inflating once the preset pressure is reached.
5. Carefully remove the needle from the ball.

4.4 Sèvi ak flach ki ap dirije a

The pump includes a bright LED light for convenience in low-light conditions.

• Pou limen: Double-tap the "+" button.
• Pou etenn: Double-tap the "+" button again.

5. Antretyen

• Clean the pump's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Store the pump and its accessories in the provided waterproof bag when not in use to protect it from dust and moisture.
• Ensure the ball needle and air hose are clean and free of debris before and after each use.
• Sere nan yon kote ki fre, sèk lwen limyè solèy la dirèk ak tanperati ekstrèm.

NAN. Depanaj

7. Espesifikasyon

8. Garanti & Sipò

Garanti: The Pumteck Electric Ball Pump comes with a 1-Year Manufacturer's Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

Sipò Kliyan: For any questions, technical assistance, or warranty claims, please contact Pumteck customer support through the retailer's platform or visit the official Pumteck store on Amazon. Please have your product model number (AP1-P) and purchase details ready when contacting support.

Visit the Pumteck Store: Pumteck Amazon Store