ANENG PN200

ANENG PN200 Dijital Clamp Manyèl Enstriksyon Miltimèt

Modèl: PN200

1. Pwodwi souview

The ANENG PN200 is a versatile digital clamp meter multimeter designed for accurate measurement and troubleshooting of electrical systems. It combines the functions of a clamp meter and a multimeter, offering a wide range of measurement capabilities for both AC and DC circuits.

ANENG PN200 Dijital Clamp Meter showing multiple functions

Image: ANENG PN200 Digital Clamp Meter highlighting its multiple functions including AC/DC Voltage, AC/DC Current, Max Count, Backlit Screen, Hertz, Resistance, Capacitance, Diode/Buzzer, Data Retention, Automatic Shutdown, NCV, and Relative Measurement.

2. Pake kontni

Your ANENG PN200 package includes the following items:

  • 1x ANENG PN200 Digital Clamp Mèt
  • 2x AAA pil
  • 1x Combination Test Lead Set (includes 4 connection sockets, 2 PVC cables, 2 copper needles, 2 U-shaped inserts, 2 meter pens, 2 alligator clips, 2 puncture needles)
  • 1x Multimeter Test Lead Set
  • 1x Chaje kab
  • 1x manyèl enstriksyon
  • 1x Bag Depo

3. Enstalasyon

3.1 Enstalasyon batri

  1. Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
  2. Glise kouvèti a pou louvri konpatiman an.
  3. Mete de pil AAA yo nan plas yo, asire w polarite a kòrèk (+/-).
  4. Glise kouvèti konpatiman batri a tounen nan plas li jiskaske li fè yon klik byen fèm.

3.2 Konekte fil tès yo

  1. Pou voltage, resistance, capacitance, diode, and continuity measurements, insert the black test lead into the 'COM' (common) jack.
  2. Insert the red test lead into the 'VΩHz' jack.
  3. Ensure connections are firm before use.

4. Operasyon Enstriksyon

The ANENG PN200 features a rotary dial for selecting measurement functions and dedicated buttons for additional features.

4.1 Seleksyon Fonksyon

Vire bouton wotasyon an pou chwazi fonksyon mezi ou vle a:

  • V ~: AC Voltage mezi
  • V-: DC Voltage mezi
  • A~: AC Current measurement (using clamp)
  • POU-: DC Current measurement (using clamp)
  • Ω: Mezi rezistans
  • Hz: Mezi frekans
  • Kapasite: Mezi kapasite
  • Dyòd/Kontinuite: Diode test and Continuity check
  • NCV: Ki pa Peye-Kontakte Voltage deteksyon

4.2 Fonksyon kle

  • H/HOLD: Short press to hold the current reading on the display. Long press to activate/deactivate the backlight.
  • REL: Used for relative measurement, setting the current reading as a reference point. For capacitance, press to zero out the meter before clamping.
  • Mete: Used to switch between different sub-functions within a main dial setting (e.g., AC/DC for current, Diode/Continuity).

4.3 Mezi Espesifik

Below are common measurement procedures:

AC / DC Voltage Mezi

  1. Turn the dial to 'V~' for AC voltage or 'V-' for DC voltage.
  2. Connect the test leads to the circuit points you wish to measure.
  3. Li voltage valè sou ekspozisyon an.

Mezi Kouran AC/DC (Clamp)

  1. Turn the dial to 'A~' for AC current or 'A-' for DC current.
  2. Louvri cl laamp jaws and enclose a single conductor (not a bundle of wires).
  3. Li valè aktyèl la sou ekran an.
  4. Nòt: For accurate DC current measurements, ensure to press the 'REL' button to zero out the meter before clamping.
ANENG PN200 Dijital Clamp Meter measuring high precision AC/DC current

Image: ANENG PN200 Digital Clamp Meter demonstrating high precision 600A AC/DC current measurement capability.

Resistance, Capacitance, Diode, Continuity, Frequency

  1. Turn the dial to the respective function symbol (Ω, Capacitance, Diode/Continuity, Hz).
  2. Connect the test leads to the component or circuit.
  3. For Diode/Continuity, use the 'SET' button to toggle between modes. A beep indicates continuity.
  4. For Capacitance, ensure the capacitor is discharged before measurement.
ANENG PN200 Dijital Clamp Meter showing various measurement functions

Image: ANENG PN200 Digital Clamp Meter displaying its comprehensive measurement capabilities including DC Voltage, AC Voltage, Capacitance, Diode, Capacitive Discharge, and Resistance.

Ki pa Peye-Kontakte Voltage (NCV) Deteksyon

  1. Turn the dial to 'NCV'.
  2. Bring the top part of the clamp meter near an AC voltage sous.
  3. The meter will beep and an indicator light will illuminate if AC voltage detekte.
ANENG PN200 Dijital Clamp Meter performing NCV detection

Image: ANENG PN200 Digital Clamp Meter detecting non-contact induced electricity from a wall outlet.

4.4 Official Product Video Demonstration

Video: An official product video from ANENG Stores demonstrating various features and operations of the PN200 Digital Clamp Mèt.

5. Antretyen

5.1 Netwayaj

Siye aparèy la avèk yon twal sèk epi mou. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.

5.2 Ranplasman batri

If the low battery indicator appears on the display, replace the AAA batteries as described in the Setup section.

5.3 Depo

Sere cl laamp meter and its accessories in the provided storage bag in a cool, dry place away from direct sunlight and extreme temperatures.

NAN. Depanaj

  • Ask a question about this manual

    Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.