Humanscale eFloat Go Electric Height-Adjustable Desk User Manual

1. Entwodiksyon ak souview

The Humanscale eFloat Go is an electric height-adjustable desk designed for both home and commercial office environments. It features innovative anti-collision technology, quiet motors, and a programmable hand switch, allowing users to seamlessly adjust their working position throughout the day.

Karakteristik kle yo enkli:

• Electric Height-Adjustable Table for dynamic work postures.
• Programmable hand switch to store and recall preferred height settings.
• Spacious 30" Depth by 60" Width top (for this specific model).
• Designed for quick and easy setup.

Image 1.1: The Humanscale eFloat Go desk in a modern office environment, showcasing its design and functionality with a monitor and accessories.

2. Enfòmasyon sou Sekirite

Please read and understand all safety instructions before operating the eFloat Go desk. Failure to follow these instructions may result in injury or damage to the product.

• Always keep hands and objects clear of all moving parts during height adjustments.
• Pa depase pwa maksimòm rekòmande a 250 liv (113 kg) on the desk surface to ensure stability and safe operation.
• Ensure the power cord is properly routed to prevent tripping hazards or damage.
• Pa kite timoun yo opere biwo a san sipèvizyon yon granmoun.
• Avoid placing liquids directly on the desk surface without proper coasters or protection.

3. Enstalasyon ak Asanble

The Humanscale eFloat Go desk is designed for straightforward assembly, typically taking under 5 minutes with the recommended tools. Assembly requires at least one person.

3.1 Zouti obligatwa

• tournevis (pa enkli)

3.2 Etap Asanble

1. Depake konpozan: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Verify all components are present according to the packing list.
2. Attach Legs to Top: Position the desk top upside down. Align the desk legs with the pre-drilled holes on the underside of the desk top. Secure the legs using the provided screws and a screwdriver.
3. Connect Control Box and Hand Switch: Locate the control box and connect the motor cables from each leg. Connect the hand switch cable to the designated port on the control box.
4. Route Câbles: Use the included cable management clips to neatly route all cables, ensuring they do not interfere with the desk's movement.
5. Konekte pouvwa: Plug the power cord into the control box, then into a standard electrical outlet.
6. Initial Power-On and Reset: After connecting power, the desk may require an initial reset. Refer to Section 4.1 for first-time use and reset procedures.

Image 3.1: Dimensional diagram of the eFloat Go desk, illustrating its 29" depth, 58" width, and 26.5" height.

4. Operasyon Enstriksyon

The eFloat Go desk features an intuitive programmable hand switch for easy height adjustment and memory settings.

4.1 First-Time Use and Reset

Upon initial power-on or after a power interruption, the desk may need to be reset:

1. Peze epi kenbe la DESANN arrow button until the desk reaches its lowest position and then slightly rises. Release the button.
2. The desk is now calibrated and ready for use.

4.2 Adjusting Desk Height

• To raise the desk, press and hold the UP bouton flèch.
• To lower the desk, press and hold the DESANN bouton flèch.
• Lage bouton an nan wotè ou vle a.

4.3 Programming Memory Presets

The hand switch allows you to save up to three preferred height settings:

1. Adjust the desk to your desired height using the UP/DOWN arrow buttons.
2. Peze a M (Memory) button. The display will show 'S-'.
3. Within 3 seconds, press one of the numbered preset buttons (1, 2, oswa 3). The display will show 'S-1', 'S-2', or 'S-3' to confirm the setting is saved.
4. Repeat for other desired height settings.

4.4 Itilizasyon Prereglaj Memwa

To move the desk to a saved height:

• Simply press the corresponding numbered preset button (1, 2, oswa 3Biwo a ap deplase otomatikman nan wotè ki anrejistre a.

4.5 Teknoloji Anti-Kolizyon

The eFloat Go desk is equipped with anti-collision technology. If the desk encounters an obstruction during height adjustment, it will automatically stop and reverse slightly to prevent damage. Clear any obstructions before resuming adjustment.

Imaj 4.1: Yon gwo plan view of the programmable hand switch, showing the up/down arrows, memory button (M), and three preset buttons (1, 2, 3).

5. Antretyen

Proper care will ensure the longevity and optimal performance of your Humanscale eFloat Go desk.

• Netwayaj: Wipe the desk surface and frame with a dry, soft cloth. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Kondisyon anviwònman: Avoid direct sunlight exposure for extended periods, as this may affect the laminate finish.
• Distribisyon pwa: Do not place heavy objects exclusively on the edges of the desk. Distribute weight evenly across the surface.
• Jesyon kab: Periodically check that all cables are securely routed and not pinched or damaged.

NAN. Depanaj

If you encounter issues with your eFloat Go desk, refer to the following common troubleshooting steps:

6.1 Desk Not Moving

• Tcheke pouvwa: Ensure the power cord is securely plugged into both the desk's control box and a functioning wall outlet.
• Pwosedi Reyajiste: Perform the reset procedure described in Section 4.1.
• Pwoteksyon Surcharge: If the desk has been overloaded (exceeding 250 lbs), the motor may have temporarily shut off. Remove excess weight and wait a few minutes before attempting to operate again.

6.2 Uneven Movement or Noise

• Tcheke pou obstak: Ensure there are no objects impeding the legs or frame during movement.
• Sifas Nivo: Verify the desk is placed on a level floor. Adjust the leveling feet if necessary.
• Sere vis yo ankò: Over time, some assembly screws may loosen. Carefully re-tighten all assembly screws.

6.3 Anti-Collision System Triggering Frequently

• Chemen klè: Ensure the desk's path of movement is completely clear of any objects, cables, or walls.
• Sansiblite: If the issue persists without clear obstructions, contact Humanscale support for potential sensitivity adjustments or further diagnostics.

7. Espesifikasyon

8. Garanti ak sipò

Humanscale stands behind the quality of its products.

8.1 Enfòmasyon sou Garanti

The Humanscale eFloat Go desk is covered by a 10-Year, 24/7 Humanscale Warranty. This comprehensive warranty covers parts and labor for manufacturing defects under normal use. Please retain your proof of purchase for warranty claims.

8.2 Sipò pou Kliyan

For technical assistance, warranty claims, or further inquiries, please contact Humanscale customer support. You can find more information and contact details by visiting the official Humanscale store:

Visit the Humanscale Store on Amazon