SOBO AQ-500F Internal Aquarium Filter Pump

1. Entwodiksyon

Thank you for choosing the SOBO AQ-500F Internal Aquarium Filter Pump. This compact and efficient filter is designed to provide optimal water quality for small to very small aquariums, suitable for both fresh and saltwater environments. It features a fully submersible design and a filter sponge to effectively remove impurities, ensuring a clean and healthy habitat for your aquatic life.

Image 1.1: SOBO AQ-500F Internal Aquarium Filter Pump with its packaging, showing approximate dimensions of 11cm height, 3.4cm width, and 4.1cm depth.

2. Enstriksyon Sekirite

Please read all safety instructions carefully before operating this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Sekirite elektrik: Asire voltage and frequency of your power supply match the specifications of the pump (AC 220-240V, 50/60Hz). Always unplug the filter from the power outlet before performing any maintenance, cleaning, or when handling the aquarium water. Do not operate the pump if the power cord or plug is damaged.
• Submersion: This filter is designed to be fully submersible. Ensure it is completely submerged in water during operation to prevent overheating and damage.
• Plasman: Position the filter securely within the aquarium using the provided suction cups. Ensure it is not obstructed by decorations or substrate.
• Timoun ak bèt kay: Keep this appliance out of reach of children and pets.
• Itilizasyon entansyonèl: Use this filter only for its intended purpose in aquariums. Do not use it for other liquids or applications.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè a:

• SOBO AQ-500F Internal Filter Pump Unit
• Kòd pouvwa ak ploge
• Valv kontwòl lè
• Air Plastic Pipe
• Suction Cups (pre-attached or separate)
• Filter Sponge (pre-installed)

Image 3.1: The SOBO AQ-500F filter pump unit, power cord, air control valve, and air plastic pipe.

4. Espesifikasyon

5. Enstriksyon Enstalasyon

Follow these steps to properly install your SOBO AQ-500F filter:

1. Dekonpoze: Retire tout konpozan yo nan anbalaj la avèk prekosyon epi enspekte pou wè si gen nenpòt domaj.
2. Assemble Air Components: Attach the air plastic pipe to the air intake nozzle on the filter unit. Then, connect the air control valve to the other end of the air plastic pipe. This allows for aeration in your aquarium.
3. Position Suction Cups: Ensure the suction cups on the back of the filter are clean and securely attached to the filter body.
4. Placement in Aquarium: Submerge the filter completely in your aquarium water. Press the suction cups firmly against the inside glass wall of the aquarium to secure the filter in place. Ensure the filter is positioned vertically and is fully underwater.
5. Konekte pouvwa: Once the filter is securely placed and fully submerged, plug the power cord into a suitable electrical outlet.

Image 5.1: Key components for setup, including the air control valve, air plastic pipe, and suction cups.

Image 5.2: The AQ-500F filter installed and operating in an aquarium, demonstrating proper submersion and water flow.

6. Operasyon Enstriksyon

The SOBO AQ-500F filter is designed for continuous operation to maintain water quality.

• Pouvwa sou: After plugging in, the pump will start immediately, circulating and filtering the aquarium water.
• Ajisteman koule lè: Use the air control valve attached to the air pipe to adjust the amount of air introduced into the aquarium. Rotate the valve to increase or decrease the airflow as desired.
• Itilizasyon kontinyèl: For optimal water quality, it is recommended to operate the filter continuously.

Imaj 6.1: Yon gwo plan view of the filter unit, showing the outlet and general design.

7. Antretyen

Regular maintenance is crucial for the longevity and efficient operation of your filter. Always unplug the filter before performing any maintenance.

1. Filter Sponge Cleaning: The internal filter sponge should be cleaned regularly, typically every 2-4 weeks, depending on the aquarium's bioload. To clean, unplug the filter, remove it from the aquarium, and detach the filter casing. Rinse the sponge thoroughly in old aquarium water (not tap water, as chlorine can kill beneficial bacteria) to remove accumulated debris. Do not use soap or detergents.
2. Netwayaj Enpèlè: Periodically, check and clean the impeller and its chamber. Unplug the filter, remove the filter casing, and gently pull out the impeller. Clean any debris or mineral buildup from the impeller and its shaft using a small brush.
3. Reyasanblaj: After cleaning, reassemble the filter components, ensuring the filter sponge and impeller are correctly seated. Secure the filter casing.
4. Réinstallation: Place the filter back into the aquarium, ensuring it is fully submerged before plugging it back in.

NAN. Depanaj

If you encounter issues with your SOBO AQ-500F filter, refer to the following common problems and solutions:

9. Garanti ak sipò

This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, spare parts, or warranty claims, please contact the retailer or manufacturer directly with your purchase details.