BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Entwodiksyon

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Karakteristik pwodwi

• Capteur Mouvman Entegre: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Tan Kenbe Reglabl: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Twa mòd operasyon:
  • Mòd OTO: Light activates when motion is detected in dark conditions.
  • Mòd ON: Light remains constantly on.
  • G mòd: Light activates when motion is detected in both daytime and nighttime conditions.
• Twa Tanperati Koulè: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Konsepsyon ultra-mens: Low-profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Enstalasyon versatile: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Manyèl Enstriksyon (dokiman sa a)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Enfòmasyon sou Sekirite

AVÈTISMAN: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• Aparèy sa a fèt pou yon ekipman pou kouran 120V AC.
• Pa eseye modifye aparèy la.
• Kenbe timoun yo lwen zòn enstalasyon an.

Enstalasyon & Enstalasyon

Swiv etap sa yo pou enstalasyon apwopriye:

1. Prepare pou enstalasyon:
   • Koupe kouran an nan disjonktè a anvan ou kòmanse.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Enstale Support Mounting:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Koneksyon fil elektrik:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Monte aparèy limyè a:
   • Ak anpil atansyon mete tout fil nan bwat junction la.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Retabli pouvwa: Retounen kouran nan disjoncteurs a.

Figi 4: Gid vizyèl pou pwosesis enstalasyon an.

Enstriksyon Operasyon

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Chwazi mòd operasyon:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • OTO: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • SOU: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 segonn
   • 120S: 120 segonn (2 minit)
   • 180S: 180 segonn (3 minit)

Figure 5: Switches for adjusting hold time and operating modes.

Antretyen

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Netwayaj: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Dirije lavi: Sous limyè LED entegre a gen yon dire lavi mwayèn 30,000 èdtan epi itilizatè a pa ka ranplase li.
• Enspeksyon: Periodically check the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.

Depanaj

Si ou rankontre pwoblèm ak aparèy ekleraj ou a, gade pwoblèm ak solisyon komen sa yo:

Espesifikasyon

Garanti ak sipò

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN websit la. Kenbe resi acha ou kòm prèv acha.