BLNAN 9-Inch 18W LED Flush Mount Ceiling Light User Manual

Enfòmasyon enpòtan sou sekirite

Tanpri li tout enstriksyon yo ak anpil atansyon anvan enstalasyon ak itilizasyon. Kenbe manyèl sa a pou referans pita.

• AVÈTISMAN: Risk pou chòk elektrik. Dekonekte kouran an nan disjonktè a oswa bwat fizib la anvan enstalasyon oswa antretyen.
• All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
• Do not use with a dimmer switch. This fixture is non-dimmable.
• Asire w ke sifas kote w ap monte aparèy la ka sipòte pwa li.
• Pa eseye modifye aparèy la nan okenn fason.
• Kenbe materyèl anbalaj lwen timoun yo.

Pwodwi souview

The BLNAN 9-inch 18W LED Flush Mount Ceiling Light is an ultra-thin, round light fixture designed for various indoor spaces. It features selectable color temperatures (3000K, 4000K, 5000K) to suit different preferences and environments. Its low-profile design is ideal for areas with limited ceiling height, and it offers easy hardwire installation.

Karakteristik kle:

• Ultra-Thin, Low Profile Konsepsyon: Diameter 9 inches, thickness 0.99 inches, suitable for low ceilings.
• 3 Color Temperatures Selectable: Choose between 3000K (Warm White), 4000K (Natural White), and 5000K (Cool White) via a toggle switch on the fixture.
• Enstalasyon fasil: Designed for quick hardwire installation on existing junction boxes (2.75"-3.7" screw holes). Includes a hanging rope for convenience during wiring.
• Enèji efikas: 18W LED replaces 180W fluorescent fixtures, saving energy and costs.
• IP40 Dustproof: Good sealing prevents dust and bugs from entering the fixture.
• No Flicker & CRI 90: Provides stable, high-quality light with accurate color rendering.

Kontni pake

Verifye ke tout konpozan yo prezan anvan ou kòmanse enstalasyon an.

• BLNAN 9-Inch 18W LED Flush Mount Ceiling Light Fixture
• Mounting Hardware (screws, expansion tubes, wire nuts)
• Manyèl Enstriksyon (dokiman sa a)

Espesifikasyon

Enstalasyon & Enstalasyon

Follow these steps to safely install your BLNAN LED Flush Mount Ceiling Light. It is recommended to have a second person assist during installation.

1. Etenn pouvwa: Before starting, ensure the power to the junction box is turned off at the circuit breaker or fuse box. Verify power is off using a voltage tèsteur.
2. Retire ansyen enstalasyon an (si sa aplikab): Carefully remove any existing light fixture from the ceiling, disconnecting its wiring.
3. Atache Sipò Montaj la: Rotate and remove the plastic mounting bracket from the new light fixture. Secure this bracket to your existing junction box using the provided screws. The bracket is designed to fit junction boxes with screw holes 2.75" to 3.7" apart.
   

   Image: Mounting bracket attached to the junction box.

4. Chwazi Tanperati Koulè: Before wiring, locate the toggle switch on the back of the light fixture. This switch allows you to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 5000K (Cool White). Choose the setting that best suits your space, as this cannot be easily changed after installation without removing the fixture.
   

   Image: Selecting the desired color temperature using the toggle switch.
5. Fil aparèy la: The fixture includes a hanging rope with a hook. Use this hook to temporarily hang the light fixture from the mounting bracket while you make the electrical connections. Connect the wires as follows:
   • Konekte a nwa fil soti nan aparèy la rive nan la nwa (live) wire from the junction box.
   • Konekte a blan fil soti nan aparèy la rive nan la blan (neutral) wire from the junction box.
   • Konekte a vèt fil (tè) ki soti nan aparèy la rive nan bare copper or green (ground) wire from the junction box.
   Use the provided wire nuts to secure all connections. Ensure all connections are tight and secure.
   

   Image: Wiring connections and use of the hanging rope.

6. Monte aparèy la: Once wiring is complete, carefully push the wires into the junction box. Align the light fixture with the mounting bracket and rotate it clockwise until it locks securely into place. The ultra-thin design ensures a flush fit.
   

   Image: BLNAN LED Flush Mount Ceiling Light installed.
7. Retabli pouvwa: Turn the power back on at the circuit breaker or fuse box. Test your new light fixture.

Enstalasyon Videyo:

Videyo: Yon ti pale souview of the BLNAN LED Flush Mount Ceiling Light and its features, including a quick look at the installation process.

Video: A short demonstration of the 3CCT (3 Color Temperature) feature of the BLNAN hardwired ceiling light.

Enstriksyon Operasyon

This BLNAN LED Flush Mount Ceiling Light is designed for simple operation.

• Limen/Etenyen: Sèvi ak switch miray òdinè ou a pou limen oswa etenn aparèy limyè a.
• Chanje Tanperati Koulè: The color temperature (3000K, 4000K, or 5000K) is selected via a toggle switch located on the back of the fixture during installation. This setting is fixed once the fixture is installed and cannot be changed via a wall switch or remote control. If you wish to change the color temperature, you must safely disconnect power, remove the fixture, adjust the toggle switch, and then reinstall.

Antretyen

The BLNAN LED Flush Mount Ceiling Light requires minimal maintenance.

• Netwayaj: Asire w ou koupe kouran an anvan ou netwaye li. Siye aparèy la avèk yon twal mou, sèk oswa yon ti kras mouye.amp cloth. Do not use harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
• Dirije lavi: The integrated LED light source has an average life of 30,000 hours and is not replaceable. No bulb changes are required.

Depanaj

Si w gen pwoblèm ak aparèy ekleraj ou a, gade pwoblèm ak solisyon komen sa yo:

Si pwoblèm nan pèsiste apre ou fin eseye solisyon sa yo, tanpri kontakte sèvis kliyan.

Garanti ak sipò

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official BLNAN websit. Tèm ak kondisyon garanti espesifik yo ka varye.