APLOS AP50
APLOS AP50 Scuba Diving Flashlight User Manual
Modèl: AP50
1. Entwodiksyon
Thank you for choosing the APLOS AP50 Scuba Diving Flashlight. This manual provides essential information for the safe and effective use of your dive light. Please read it thoroughly before operation and retain it for future reference.
2. Enfòmasyon sou Sekirite
- Do not operate out of water for extended periods: The flashlight generates heat. Prolonged use out of water can cause overheating and damage.
- Sekirite batri: Use only the specified rechargeable battery. Ensure correct polarity during installation. Do not expose batteries to extreme temperatures or dispose of them in fire.
- Fok ki enpèmeyab: Always ensure O-rings are clean, properly seated, and lubricated before diving to maintain the IPX8 waterproof rating.
- Pwoteksyon je: The AP50 emits a powerful beam. Avoid direct eye exposure to prevent temporary vision impairment.
- Timoun: Kenbe soti nan atenn timoun yo.
3. Pake kontni
Upon opening your APLOS AP50 package, please verify that all items are present:
- 1 x APLOS AP50 Dive Light
- 1 x Rechargeable Lithium-Ion Battery (5000mAh)
- 1 x Chargeur batri USB
- 1 x USB Chaje Kab
- 2 x rezèv O-bag
- 1 x Lanyard
- 1 x manyèl itilizatè

Imaj 3.1: Contents of the APLOS AP50 package, showing the flashlight, charger, USB cable, spare O-rings, and user manual.
4. Pwodwi souview
The APLOS AP50 is a high-performance scuba diving flashlight designed for underwater exploration. It features a durable aluminum alloy body, a powerful P70 LED, and multiple lighting modes.

Imaj 4.1: Diagram illustrating the key components of the APLOS AP50 dive light, including the P70 LED, high transparent tempered glass lens, AL-6061-T6 aluminum alloy body, mode switch button, and waterproof O-rings.
Karakteristik kle:
- P70 High-Definition LED: Delivers up to 5000 lumens with a 7000K cool white beam.
- Evalyasyon ki enpèmeyab IPX8: Submersible up to 110 meters (360 feet).
- Konstriksyon dirab: Made from AL-6061-T6 aluminum alloy with a wear-resistant coating and toughened glass lens.
- Four Brightness Modes: High (5000lm), Medium (2000lm), Low (1000lm), and Strobe (2000lm).
- Batri ki dire lontan: Built-in 5000mAh rechargeable battery provides over 8 hours of runtime in low mode.
- Smart Power Status Display: Integrated indicator light shows battery level.

Imaj 4.2: The APLOS AP50 flashlight highlighting its three adjustable modes (High, Medium, Beacon) and the P70 LED with a maximum output of 5000 lumens.

Imaj 4.3: The intelligent power status display on the APLOS AP50, showing different LED colors (Green, Yellow, Red, Red Flashing, Power off) corresponding to battery voltage nivo.
5. Enstalasyon
5.1 Enstalasyon ak Chaje Batri
- Unscrew Tail Cap: Gently unscrew the tail cap of the flashlight counter-clockwise.
- Mete batri: Insert the provided 5000mAh rechargeable Lithium-Ion battery with the positive (+) end facing towards the flashlight head.
- Bouchon ke a byen fèmen: Screw the tail cap back on clockwise, ensuring it is tightened completely to maintain the waterproof seal.
- Inisyal chaj: Before first use, fully charge the battery using the included USB charger and cable. The charger indicator will typically change color (e.g., red to green) when charging is complete.

Imaj 5.1: Illustration demonstrating the importance of securely tightening the tail cap of the diving flashlight to ensure proper waterproofing and functionality. If difficult to screw, apply specialized lubricating silicone grease or edible oil.

Imaj 5.2: The universal USB charger included with the APLOS AP50, compatible with various USB power sources like laptops, power banks, and wall adapters.
6. Operasyon Enstriksyon
6.1 Pouvwa pou limen/etenn ak seleksyon mòd
The APLOS AP50 features a single side switch for all operations.
- Pou limen: Press the side switch once. The flashlight will turn on in the last used mode.
- Pou Chanje Mòd: While the flashlight is on, press the side switch repeatedly to cycle through the modes: High → Medium → Low → Strobe.
- Pou etenn: Press and hold the side switch for approximately 2 seconds. Alternatively, double-click the switch to turn it off directly from any mode.
Videyo 6.1: An official product video demonstrating the operation of the APLOS AP50 Scuba Diving Flashlight, including turning it on, cycling through brightness modes, and turning it off. This video showcases the flashlight's functionality and ease of use.
6.2 Endikatè nivo batri
The indicator light on the side switch provides real-time battery status:
- Limyè vèt: Batri voltage above 3.4V (High).
- Limyè jòn: Batri voltage 3.2V - 3.4V (Medium).
- Limyè wouj: Batri voltage 3.0V - 3.2V (Low).
- Limyè wouj kap flache: Batri voltage 2.8V - 3.0V (Critically Low, recharge immediately).
- Pa gen limyè: Batri voltage below 2.8V (Power off).
7. Antretyen
- Rense apre w fin itilize: After each dive, rinse the flashlight thoroughly with fresh water to remove salt, sand, or debris.
- Swen O-Ring: Regularly inspect the O-rings for any signs of damage, cracks, or debris. Clean them and apply a thin layer of silicone grease to maintain their elasticity and sealing properties. Replace damaged O-rings immediately using the provided spares.
- Depo batri: If storing the flashlight for an extended period, remove the battery to prevent potential leakage and discharge. Store the battery in a cool, dry place.
- Netwayaj lantiy: Clean the tempered glass lens with a soft, lint-free cloth. Avoid abrasive materials that could scratch the surface.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Flach pa limen. | Batri a mouri oswa li mal enstale. | Charge the battery. Ensure the battery is inserted with correct polarity (+ towards head). |
| Limyè a ap tranble oubyen li fèb. | Batri ki ba oswa koneksyon ki lach. | Recharge the battery. Ensure the tail cap is fully tightened. |
| Water ingress after diving. | Damaged or improperly seated O-rings; tail cap not fully tightened. | Inspect and clean O-rings, apply silicone grease, and ensure the tail cap is securely tightened before diving. Replace O-rings if damaged. |
| Flashlight overheats quickly out of water. | Normal operation for high-power LED lights. | Avoid prolonged use out of water. The flashlight is designed for heat dissipation in water. |
9. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Modèl | AP50 |
| Sous limyè | P70 dirije |
| Maksimòm Klate | 5000 Lumen |
| Tanperati Koulè | 7000K (Blan fre) |
| Beam Distance (Land) | Jiska 500 mèt |
| Evalyasyon ki enpèmeyab | IPX8 |
| Max Diving Depth | 110 mèt (360 pye) |
| Materyèl | AL-6061-T6 Aluminum Alloy |
| Kalite batri | Lityòm-Ion rechargeable (5000mAh) |
| Opere Voltage | 3.7 Volts |
| Dimansyon | 6.7 x 2.6 x 1.4 pous |
| Pwa | 1.12 liv (510 gram) |
10. Garanti ak sipò
APLOS products are manufactured with quality and performance in mind. For warranty information, technical support, or any inquiries regarding your AP50 Scuba Diving Flashlight, please refer to the warranty card included in your package or visit the official APLOS websit la. Ou kapab kontakte revandè ou a tou pou jwenn asistans.
Pou plis enfòmasyon ak dènye nouvèl sou pwodwi yo, vizite APLOS Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.