FERRISA 4K@60Hz 4x2 HDMI Matrix Switch Splitter with Audio Extractor

1. Plis paseview

The FERRISA 4K@60Hz 4x2 HDMI Matrix Switch Splitter is designed to manage and distribute up to four high-definition HDMI input signals to two separate displays or projectors. This device supports advanced video and audio technologies, providing a versatile solution for various home theater, office, or conference room setups. It allows for flexible signal routing, enabling both splitter mode (same source to two displays) and matrix mode (different sources to two displays).

Key capabilities include support for 4K@60Hz resolution, HDR, HDMI 2.0, and HDCP 2.2. It also features an automatic downscaler for seamless compatibility with mixed 4K and 1080P displays, and robust audio extraction options via optical fiber or 3.5mm stereo headphone outputs.

2. Karakteristik

• 4K@60Hz 4x2 HDMI Matrix: Supports switching or splitting 4 high-definition signals to 2 displays or projectors.
• Sipò pou rezolisyon segondè: Compatible with video resolutions up to 4K@60Hz, 1080P, and 3D.
• Nòm HDMI avanse: Supports HDMI 2.0, HDCP 2.2, 18Gbps data rate, and broadband transmission up to 600Mhz.
• Automatic Downscaler: Automatically reduces 4K resolution to 1080P for compatible displays, allowing simultaneous display on mixed resolution monitors.
• Ekstraksyon Audio: Extracts audio separately or simultaneously via SPDIF (optical) or 3.5mm audio output ports. Supports LPCM/DTS5.1 channel/Dolby-AC3 audio formats.
• Smart EDID Management: Configurable EDID settings to adjust resolution and audio format.
• Opsyon kontwòl: Manual button switching and IR remote control for convenient input source selection.
• Lajè konpatibilite: Connects to various HDMI source devices (VCD/DVD player, Blu-ray players, Xbox, ROKU, STB/Fire TV, PS3, PS5, PC) and output devices (monitor, projector, HDTV).
• Konstriksyon dirab: Exquisite metal shell for enhanced heat dissipation, corrosion resistance, and durability.

3. Pake kontni

Upon opening your FERRISA 4K@60Hz 4x2 HDMI Matrix package, you should find the following items:

• 1x FERRISA 4K@60Hz 4x2 HDMI Matrix Switch Splitter
• 1x IR Remote Control (Note: AAA batteries not included)
• 1x 5V pouvwa adaptè
• 1x manyèl itilizatè

4. Pwodwi Dyagram

Image 1: Detailed diagram of the FERRISA 4K@60Hz 4x2 HDMI Matrix Switch, showing all input and output ports, control buttons, IR receiver, power input, and EDID dip switches.

The diagram illustrates the layout of the device:

• Panèl devan: Power LED, IR Receiver, Output 2 Signal Indicators (1-4), Output 1 Signal Indicators (1-4), Output 2 Signal Switch Button (Key2), Output 1 Signal Switch Button (Key1), Audio Optical Output, Audio R/L Output.
• Dèyè Panel: HDMI OUT 1, HDMI OUT 2, HDMI IN 1, HDMI IN 2, HDMI IN 3, HDMI IN 4, EDID Dip Switches (1-4), DC/5V Power Input.

Image 2: EDID Setting Method table, detailing the functions of different dip switch combinations for resolution and audio format.

5. Enstalasyon

Follow these steps to set up your FERRISA 4K@60Hz 4x2 HDMI Matrix Switch Splitter:

1. Aparèy koupe pouvwa: Asire w ke tout aparèy ak ekran sous HDMI yo etenn anvan ou fè koneksyon yo.
2. Konekte sous HDMI: Connect your HDMI source devices (e.g., VCD/DVD player, Xbox, PS5, PC) to the HDMI IN 1-4 ports on the rear panel of the matrix using high-quality HDMI 2.0 cables.
3. Konekte Ekran yo: Connect your HDMI displays (e.g., monitor, HDTV, projector) to the HDMI OUT 1 and HDMI OUT 2 ports on the rear panel of the matrix using high-quality HDMI 2.0 cables.
4. Connect Audio Output (Optional): If you wish to extract audio, connect your optical audio cable to the Optical Output port or a 3.5mm audio cable to the 3.5mm Audio Output port.
5. Konekte pouvwa: Plug the 5V power adapter into the DC/5V Power Input port on the matrix, then plug the adapter into a power outlet. The Power LED on the front panel will illuminate.
6. Pouvwa sou aparèy: Power on all connected HDMI source devices and displays.

6. Opere

The FERRISA HDMI Matrix offers flexible control over your audio and video signals:

6.1 Input/Output Switching

• Manyèl Chanje: Use the 'Key1' button on the front panel to cycle through inputs for HDMI OUT 1. Use the 'Key2' button to cycle through inputs for HDMI OUT 2.
• Kontwòl Remote: Use the included IR remote control to select specific inputs for each output. The remote typically has dedicated buttons for Output 1 Source Selection and Output 2 Source Selection.

Image 3: Illustration of Splitter Mode (same input source to two monitors) and Matrix Mode (different input sources to two monitors).

6.2 Anviwònman EDID

The EDID (Extended Display Identification Data) dip switches on the rear panel allow you to configure the preferred video resolution and audio format. Refer to the EDID Setting Method table (Image 2 in Product Diagram section) for specific configurations. Ensure the device is powered off before changing EDID settings, then power it back on for changes to take effect.

6.3 Automatic Downscaling

The matrix supports automatic resolution downscaling. If one display is 4K and the other is 1080P, the 4K signal will be automatically downscaled to 1080P for the lower-resolution display, allowing both monitors to receive a signal simultaneously without manual adjustment (only 4K to 1080P downscaling is supported).

7. Antretyen

• Netwayaj: Sèvi ak yon twal mou epi sèk pou netwaye aparèy la. Evite pwodui netwayaj likid oswa materyèl abrazif.
• Depo: Sere aparèy la nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Manyen: Evite jete oswa sibi aparèy la nan gwo enpak.

NAN. Depanaj

• Pa gen imaj/siyal:
  • Asire w tout kab HDMI yo byen konekte.
  • Verify that the power adapter is correctly plugged in and the device is powered on.
  • Check if the correct input source is selected for the respective output.
  • Try bypassing the matrix to connect the source directly to the display to confirm source/display functionality.
  • Adjust EDID settings using the dip switches on the rear panel.
• Flickering/Unstable Picture:
  • Use high-quality, certified HDMI 2.0 cables.
  • Ensure cable lengths are within recommended limits for your resolution (e.g., shorter cables for 4K@60Hz).
  • Tcheke pou entèferans nan lòt aparèy elektwonik.
• Pa gen odyo:
  • Verify audio settings on your source device and display.
  • If using audio extraction, ensure the optical or 3.5mm cable is correctly connected to your audio system.
  • Adjust EDID settings to ensure the correct audio format is selected.
• Kontwòl Remote pa travay:
  • Ensure the remote has fresh AAA batteries.
  • Point the remote directly at the IR receiver on the front panel of the matrix.
  • Ensure there are no obstructions between the remote and the matrix.

9. Espesifikasyon

10. Garanti & Sipò

For warranty information and technical support, please refer to the documentation included in your product package or visit the official FERRISA websit la. Ou kapab kontakte vandè a dirèkteman tou pou jwenn asistans.