Entwodiksyon
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lamp. Please read it thoroughly before use and retain it for future reference.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Enfòmasyon sou Sekirite
Pou asire yon operasyon an sekirite epi pou anpeche domaj, tanpri obsève prekosyon sekirite sa yo:
- Itilize andedan kay la sèlman: Sa a lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Sekirite elektrik: Asire lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Avètisman Chalè: L laamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- Plasman ki estab: Mete l laamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Kenbe lwen timoun ak bèt kay: Due to the heat generated, keep the lamp soti nan atenn timoun ak bèt kay.
- Vantilasyon: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Kòd ki andomaje: Si kòd elektrik la domaje, li dwe ranplase pa manifakti a oswa yon ajan sèvis ki kalifye pou evite danje.
Kontni pake
Verifye ke tout konpozan yo prezan lè w ap debale l:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Enstalasyon
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Dekonpoze: Ak anpil atansyon retire tout eleman nan anbalaj la.
- Enstalasyon anpoul: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Mete bouchon an: Place the decorative cap onto the top of the glass vessel.
- Pozisyon Lamp: Mete l rasanbleman anamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Konekte pouvwa: Branche kòd kouran an nan yon priz elektrik estanda 120 vòlt.
Enstriksyon Operasyon
Operating your Jambo Liquid Motion Lamp se senp:
- Limen: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Tan chofe: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Dire operasyon: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Etenn: Pou fèmen lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Antretyen
Proper care will ensure the longevity and performance of your lamp:
- Netwayaj: Asire lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp nan dlo.
- Ranplasman anpoul: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Depo: Si sere lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- Pa louvri: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Depanaj
If you encounter issues with your Jambo Liquid Motion Lamp, gade pwoblèm ak solisyon komen sa yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Lamp pa limen. | No power, faulty bulb, or loose connection. | Tcheke si lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Asire lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Espesifikasyon
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | KL-217 |
| Dimansyon (D x W x H) | 11.4 cm x 11.4 cm x 39.4 cm (apeprè 4.5 x 4.5 x 15.5 pous) |
| Wotè lonbraj | 16 pous |
| Sous pouvwa | Fil elektrik |
| Voltage | 120 Volts |
| Wattage | 30 Watts |
| Kalite anpoul | Enkandesan |
| Baz anpoul | E17 |
| Chanje Kalite | Rotary |
| Materyèl de baz | Aliminyòm |
| Materyèl lonbraj | Glass |
| Fini Kalite | Metalik |
| Andedan kay la / Deyò Itilizasyon | Andedan kay la |
| Nivo rezistans dlo | Pa enpèmeyab |
| UPC | 850019692297 |
Garanti ak sipò
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo websit pou enfòmasyon kontak.