Nitecore Ci4 USB-C QC/PD Four-Slot Rapid Battery Charger User Manual

1. Entwodiksyon

The Nitecore Ci4 is an intelligent USB-C four-slot rapid charger designed for a wide range of rechargeable batteries. It features QC/PD input for fast charging and can deliver a maximum single-slot output of 3000mA. The Ci4 is compatible with various Li-ion and Ni-MH/Ni-Cd battery types, offering smart charging modes and multiple protection features to ensure safe and efficient battery management.

2. Pake kontni

• NITECORE Ci4 Charger
• Nitecore Keychain (Note: Keychain is an accessory, not part of the core charger functionality.)

3. Karakteristik kle

• Intelligent USB-C four-slot rapid charger with QC/PD input.
• Maximum single-slot output of 3000mA.
• Compatible with Li-ion and Ni-MH/Ni-Cd batteries.
• Automatic selection of 3 charging modes (CC, CV, and -dV/dt) based on battery type and capacity.
• Capable of activating over-discharged Li-ion batteries with a protective circuit.
• Optimized IMR battery charging program for extended battery lifespan.
• Dual external protection with unique cooling fins design for rapid heat dissipation.
• Multiple internal protections: Overtime Charging Protection, Anti-short Circuiting and Reverse Polarity Protection, Intelligent Temperature Regulation.

4. Espesifikasyon

5. Enstalasyon

1. Depale chajè a: Carefully remove the Nitecore Ci4 charger and any accessories from its packaging.
2. Konekte pouvwa: Connect the USB-C charging cable (not included) to the USB-C input port on the charger. Connect the other end of the cable to a compatible USB power adapter (QC/PD compatible recommended for optimal performance). The charger will power on.
3. Tcheke inisyal: Observe the indicator lights. They should briefly illuminate upon power-on, indicating the charger is ready for use.

6. Operasyon Enstriksyon

1. Mete pil: Insert one or more compatible rechargeable batteries into the charging slots. Ensure correct polarity (+ and -) as indicated on the charger and battery. The charger will automatically detect the battery type and capacity.
2. Automatic Charging Mode Selection: The Ci4 will automatically select the appropriate charging mode (CC, CV, or -dV/dt) based on the detected battery type (Li-ion, Ni-MH, Ni-Cd).
3. Pwosesis chaje: The indicator lights above each slot will show the charging status.
   • Red Indicator Constant-on: Indicates Fast Charge Mode.
   • Green Indicators:
     • 3 Green Indicators Constant-on: 100% charged.
     • 2 Green Indicators Constant-on: Approximately 80% charged.
     • 1 Green Indicator Constant-on: Approximately 30% charged.
4. Over-Discharged Li-ion Battery Activation: If an over-discharged Li-ion battery with a protective circuit is inserted, the Ci4 is capable of attempting to activate it.
5. Fini chaje: The charger will automatically terminate charging once the batteries are fully charged. Remove the batteries from the slots.

7. Antretyen

• Netwayaj: Dekonekte plato a nan sous kouran an anvan ou netwaye li. Sèvi ak yon twal mou epi sèk pou siye sifas plato a. Pa sèvi ak pwodui netwayaj abrazif oswa solvan.
• Depo: Lè w pa itilize, sere plato a nan yon kote ki fre, sèk, lwen limyè solèy la dirèk ak tanperati ekstrèm.
• Enspeksyon: Periodically inspect the charger and its USB-C port for any signs of damage or wear.

8. Prekosyon sekirite

• Use the charger only with compatible battery types as listed in the specifications.
• Pa eseye chaje pil ki pa rechargeable.
• Asire polarite batri kòrèk lè w ap mete pil yo.
• Do not expose the charger to water, high humidity, or extreme temperatures.
• Pa demonte oswa modifye plato a.
• Kenbe soti nan atenn timoun yo.
• Unplug the charger from the power source when not in use or during thunderstorms.

NAN. Depanaj

10. Garanti ak sipò

For warranty information and customer support, please refer to the official Nitecore websit la oubyen kontakte distribitè lokal ou a. Kenbe resi acha ou kòm prèv acha pou reklamasyon garanti.

Manifakti: SYSMAX Innovations co, Ltd.

Mak: Nitecore

Websit: www.nitecore.com