1. Entwodiksyon
Thank you for choosing the Vikeri 4K 32MP Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance for wildlife monitoring, hunting, and security applications. Please read this manual thoroughly before using the camera.
2. Pwodwi souview
The Vikeri 4K 32MP Trail Camera is designed for high-resolution image and video capture in various outdoor environments. Key features include:
- Ultra-High Resolution: Captures 4K video and 32MP still images.
- Vizyon lannwit: Equipped with 40 no-glow infrared LEDs for clear night recordings up to 80ft.
- Fast Trigger Time: 0.1-second trigger speed to capture fast-moving subjects.
- Wide Field nan View: 120° wide-angle lens for comprehensive monitoring.
- Konsepsyon dirab: IP66 waterproof and dustproof rating, operating in temperatures from -22°F to 158°F.
- Mouvman aktive: PIR sensor detects movement up to 80ft during the day and 65ft at night.
Figure 2.1: Vikeri 4K 32MP Trail Camera with a 32GB memory card and four AA batteries.
3. Enstalasyon
- Enstale pil: Open the battery compartment. Insert 4 or 8 AA batteries (not included, unless specified in package) according to the polarity markings. Ensure proper orientation.
- Mete kat SD: Open the camera latch. Locate the SD card slot. Insert a Class 10 or higher SD card (up to 256GB, 32GB included with some models) with the metal contacts facing down until it clicks into place.
- Pouvwa sou: Switch the camera mode selector from OFF to TEST or ON. In TEST mode, you can access the menu and adjust settings.
- Monte kamera a:
- Use the included mounting strap to secure the camera to a tree or pole. Thread the strap through the slots on the back of the camera and tighten.
- Alternatively, use the tripod screw mount on the bottom for a tripod or other mounting accessories.
- Position the camera approximately 3-6 feet (1-2 meters) from the ground, aiming towards the area you wish to monitor.
4. Operasyon Enstriksyon
4.1. Seleksyon mòd
The camera has three main modes:
- OFF: Pouvwa kamera a.
- TÈS: Pèmèt ou view the screen, adjust settings, and manually trigger photos/videos. The PIR sensor is active in this mode for testing detection range.
- SOU: The camera enters monitoring mode. The screen turns off after a few seconds, and the camera will capture photos/videos automatically when motion is detected.
4.2. Menu Settings (in TEST mode)
Use the navigation buttons (UP, DOWN, LEFT, RIGHT, OK, MENU) to navigate and adjust settings.
| Anviwònman | Deskripsyon | Valè Rekòmande |
|---|---|---|
| Mode | Select Photo, Video, or Photo+Video. | Foto + Videyo |
| Rezolisyon foto | Set image resolution (e.g., 32MP, 20MP, 16MP). | 32MP |
| Rezolisyon videyo | Set video resolution (e.g., 4K, 2.7K, 1080P). | 4K |
| PIR sansiblite | Adjust motion sensor sensitivity (High, Medium, Low). | Mwayen |
| Entèval deklanche | Time delay between detections (e.g., 5s, 10s, 30s). | 10 segonn |
| Time Lapse | Capture images at set intervals regardless of motion. | Off |
| Dat ak Lè | Mete dat ak lè aktyèl la. | Kouran |
Figure 4.1: The camera's 0.1-second trigger time ensures capture of fast-moving subjects.
Figure 4.2: The 120° wide-angle lens captures a broad field of view, detecting motion up to 65ft.
Figure 4.3: The IP66 rating ensures the camera is protected against rain, dust, ice, and snow.
Figure 4.4: Night vision with 40 no-glow 940nm LEDs provides clear images up to 80ft in darkness.
Figure 4.5: The camera supports ultra-clear 32MP images and 4K video resolution.
Figi 4.6: Egzample of a 32MP image and a frame from a 4K HD video captured by the camera.
5. Antretyen
- Netwayaj: Use a soft, dry cloth to clean the camera lens and PIR sensor window. Do not use abrasive cleaners or solvents.
- Ranplasman batri: Replace all batteries at the same time. Do not mix old and new batteries or different types of batteries.
- SD Kat Jesyon: Format the SD card regularly (at least once a month) using the camera's menu to ensure optimal performance and prevent data corruption.
- Depo: Lè w pa itilize kamera a pou yon bon bout tan, retire pil yo epi sere l nan yon kote ki fre epi sèk.
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Kamera pa limen | Low or dead batteries; incorrect battery polarity; faulty SD card. | Replace batteries; check polarity; remove SD card and try powering on. |
| Move kalite imaj/videyo | Lantiy sal; kondisyon limyè ki fèb; paramèt rezolisyon ki pa kòrèk. | Clean lens; ensure sufficient light or use night vision; adjust resolution settings. |
| Camera not triggering | PIR sensitivity too low; trigger interval too long; PIR blocked. | Increase PIR sensitivity; shorten trigger interval; ensure clear view for PIR sensor. |
| Kat SD erè | Kat SD plen; kat SD enkonpatib; kat SD pèvèti. | Efase files or replace SD card; use Class 10 or higher; format SD card in camera. |
7. Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Rezolisyon foto | Jiska 32MP |
| Rezolisyon videyo | Jiska 4K |
| Deklanche vitès | 0.1 segonn |
| Vizyon lannwit Range | Up to 80ft (24m) with 40pcs No Glow IR LEDs |
| PIR Deteksyon Range | Day: 80ft (24m), Night: 65ft (20m) |
| Jaden nan View | 120° Wide Lens |
| Evalyasyon ki enpèmeyab | IP66 |
| Tanperati Fonksyònman | -22 ° F a 158 ° F (-30 ° C a 70 ° C) |
| Depo | SD Card (up to 256GB, Class 10 or higher) |
| Pwovizyon pou pouvwa | 4 or 8 AA Batteries (external DC 6V/2A supported) |
| Ekspozisyon | Ekran LCD 2.4 pous |
8. Garanti ak sipò
Vikeri products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Vikeri websit.
Tanpri kenbe prèv ou achte pou reklamasyon garanti.