1. Entwodiksyon
This instruction manual provides essential information for the safe and effective use of your DALY LiFePo4 72V 40A 24S Smart Battery Management System (BMS). This BMS is designed to protect and optimize the performance of 24-series LiFePo4 battery packs, commonly used in energy storage, electric vehicles, electric tools, and solar systems. Please read this manual thoroughly before installation and operation.
2. Enfòmasyon sou Sekirite
Travay ak wo-voltage battery systems requires extreme caution. Failure to follow safety instructions can result in serious injury, property damage, or death. Always adhere to the following safety guidelines:
- Asire w ke tout sous kouran yo dekonekte anvan enstalasyon oswa antretyen.
- Mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou gan izole ak pwoteksyon pou je.
- Verify correct wiring polarity before connecting the BMS to the battery pack. Incorrect wiring can damage the BMS and battery.
- Do not short-circuit battery terminals or BMS connections.
- Kenbe BMS la lwen dlo, imidite, ak materyèl ki ka pran dife.
- Se sèlman pèsonèl kalifye ki ta dwe fè enstalasyon ak antretyen.
- Do not attempt to open or repair the BMS unit. Contact support for assistance.
3. Pake kontni
Verifye ke tout atik yo prezan nan pakè a:
- DALY LiFePo4 72V 40A 24S Smart BMS (1 unit)
- Bluetooth Module (1 unit)
- NTC Temperature Sensor (1 unit)
- Sampling Cable (Balance Wires) (1 set)
- UART Communication Cable (1 unit)
- Manyèl Enstriksyon (1 inite)
Figi 3.1: Egzample of package contents for the DALY Smart BMS.
4. Pwodwi souview
The DALY Smart BMS provides comprehensive protection for your LiFePo4 battery pack, including overcurrent, overcharge, overdischarge, short circuit, and temperature protection. It features a robust design with injection patent technology and a patent shell for waterproof, dustproof, shockproof, and anti-static properties.
Figi 4.1: Top view of the DALY Smart BMS, highlighting main connections and communication interfaces.
Figure 4.2: Dimensions and continuous discharge current rating of the DALY Smart BMS.
5. Enstalasyon ak Enstalasyon
Careful installation is crucial for the proper functioning of the BMS. Follow these steps precisely:
- Prepare pake batri a: Ensure your LiFePo4 battery pack consists of 24 cells in series, with each cell rated at 3.2V.
- Konekte fil balans yo:
- Before connecting the balance wires to the BMS, ensure all balance wires are correctly welded to their respective battery cell terminals.
- Connect the balance wire harness to the BMS balance port. Ensure the B- wire (total negative pole) is connected first, followed by B1, B2, and so on, up to B24 (total positive pole).
- Verifye voltage nan chak selil ak total voltage using a multimeter before proceeding.
- Connect Main Power Wires:
- Connect the main negative wire from the battery pack to the B- terminal on the BMS.
- Connect the main negative wire for the load/charger to the P- terminal on the BMS.
- Connect NTC Temperature Sensor: Plug the NTC sensor into the designated port on the BMS. Position the sensor appropriately on the battery pack to monitor temperature.
- Connect Communication Modules (Optional):
- For Bluetooth connectivity, plug the Bluetooth module into the UART port.
- For PC communication, connect the UART cable to the UART port and then to a USB-UART converter (if needed) to your computer.
- Activate the BMS: After all connections are secure, activate the BMS by pressing the activation button on the power board or by connecting the charger to the battery pack.
Figure 5.1: Wiring diagram for the DALY Smart BMS. Ensure all connections are made correctly.
For visual guidance on wiring and connections, refer to the official DALY website tutorial videos: DALY BMS Tutorial Videos.
6. Operasyon Enstriksyon
The DALY Smart BMS allows monitoring and parameter modification via Bluetooth app or PC software.
6.1. Bluetooth App Operation
Connect the Bluetooth module to the BMS UART port. Download the DALY BMS app from your smartphone's app store. Open the app, search for your BMS, and connect. The initial password for the app is 123456. Through the app, you can:
- Monitor real-time battery status (voltage, aktyèl, tanperati).
- View volim selil endividyèltages for balancing.
- Adjust protection parameters (e.g., overcharge/overdischarge voltage, overcurrent limits).
- Check fault alarms and historical data.
Figure 6.1: Monitoring the BMS via the Bluetooth smartphone application.
6.2. Operasyon lojisyèl PC
Connect the BMS to your computer using the UART cable and a USB-UART converter. Install the DALY BMS PC software. The PC software offers more detailed control and data logging capabilities, allowing for advanced parameter configuration and firmware updates.
Figure 6.2: Interacting with the BMS using PC software via UART connection.
Enpòtan: The factory default parameters are general. It is essential to review and adjust these parameters to match the specific capacity (Ah) of your battery pack. Incorrect parameter settings can lead to inaccurate state-of-charge readings and potentially damage the battery. The percentage of remaining power will be inaccurate if the capacity is not set correctly.
7. Antretyen
To ensure the longevity and optimal performance of your DALY Smart BMS:
- Regularly inspect all wiring for signs of wear, corrosion, or loose connections.
- Keep the BMS clean and free from dust and debris.
- Ensure adequate ventilation around the BMS to prevent overheating.
- Periodically check battery cell voltages through the app or software to confirm proper balancing.
- Avoid exposing the BMS to extreme temperatures or harsh environmental conditions beyond its operating specifications.
NAN. Depanaj
If you encounter issues with your DALY Smart BMS, consider the following common troubleshooting steps:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| BMS not activating/no power output | Incorrect wiring; BMS not activated; low battery voltage. | Verify all wiring connections (B-, P-, balance wires). Press the activation button or connect the charger to activate. Check battery voltage; if too low, charge the battery. |
| Pwoblèm koneksyon Bluetooth | Bluetooth module not properly connected; app issues; interference. | Ensure the Bluetooth module is securely plugged into the UART port. Restart the app and try reconnecting. Check for other Bluetooth devices causing interference. Ensure the app is updated. |
| Inaccurate State of Charge (SOC) | Battery capacity parameter not set correctly in the app/software. | Access the app or PC software and set the battery pack's actual Ah capacity. |
| Overcharge/Overdischarge protection tripping prematurely | Protection parameters set too low/high; faulty cell. | Review and adjust overcharge/overdischarge voltage parameters in the app/software to match your battery specifications. Check individual cell voltages for imbalances. |
If the problem persists after attempting these steps, please contact DALY customer support for further assistance.
9. Espesifikasyon
| Karakteristik | Spesifikasyon |
|---|---|
| Nimewo Modèl | LFP24S |
| Konpozisyon selil batri | LiFePo4 (Lithium Iron Phosphate) |
| Seri Konfigirasyon | 24S (24 cells in series) |
| Nominal Voltage | 72V (for 3.2V rated cells) |
| Kouran egzeyat kontinyèl | 40A |
| Entèfas kominikasyon | UART (Bluetooth module included) |
| Dimansyon pwodwi (L x W x H) | 5.03 x 2.6 x 0.51 pous (128 x 66 x 18 mm) |
| Pwa atik | 13.4 ons |
| Manifakti | Dongguan Daly Electronics Co., Ltd |
10. Garanti ak sipò
DALY Electronics is committed to providing high-quality products and customer satisfaction. This product comes with lifetime technical support.
- Sipò teknik: For any technical inquiries, installation assistance, or troubleshooting not covered in this manual, please contact DALY customer service. We offer 24-hour one-on-one customer service.
- Enfòmasyon pou kontakte: Refer to the official DALY websit entènèt la oswa dokiman acha ou a pou jwenn enfòmasyon kontak ki pi resan yo.