FEANS Q8 Wireless Earbuds Instruction Manual

1. Entwodiksyon

Thank you for choosing the FEANS Q8 Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features for daily use, gaming, and calls. This manual will guide you through the setup, operation, and maintenance of your new earbuds.

The FEANS Q8 earbuds incorporate a Qualcomm QCC3040 chip for stable Bluetooth 5.2 connectivity, CVC8.0 noise cancellation for clear calls, and aptX audio support for enhanced sound quality. They are compatible with a wide range of devices including iPhone, Android, and Windows systems.

2. Ki sa ki nan bwat la

• FEANS Q8 Wireless Earbuds
• Ka chaje
• Kab chaje USB (Kalite-C)
• Multiple sizes of soft ear tips (Small, Medium, Large)
• Manyèl itilizatè

3. Pwodwi souview & Karakteristik kle

The FEANS Q8 earbuds are engineered with several key technologies to optimize your listening experience:

• Chip Qualcomm QCC3040 ak Bluetooth 5.2: Ensures seamless, high-speed transmission and low-latency audio. Supports HSP/HFP/A2DP/AVRCP protocols.
• Qualcomm CVC8.0 & 4 Microphones: Advanced call noise reduction technology filters environmental sound to enhance voice clarity during calls.
• AptX High Quality Sound: Features 6mm dynamic drivers for deep bass, clear mids, and bright highs, delivering balanced premium sound.
• Pwolonje lavi batri: Up to 7 hours of playback on a single charge. The charging case provides approximately 4 additional charges.
• Hall Switch & IPX5 Water Resistance: Enables quicker pairing upon opening the case. IPX5 rating provides sweat-resistant and waterproof protection for daily use and light rain.
• TrueWireless Mirroring Technology: Ensures stable connection and automatic pairing with the last connected device.

Figure 1: Internal structure highlighting the QCC3040 chip and Bluetooth 5.2.

Figure 2: CVC 8.0 technology for clear call quality.

Figure 3: Battery life indication for earbuds and charging case.

4. Enstalasyon

1. Premye chaj:
   • Anvan premye itilizasyon an, asire w ke ekoutè yo ak bwat chaje a byen chaje.
   • Open the charging case. Remove any protective plastic films from the charging contacts on the earbuds.
   • Place the earbuds back into the charging case. Connect the USB Type-C cable to the charging port on the case and to a power source.
   • The LED indicators on the charging case will show the charging status. A full charge is indicated by all four blue lights being solid.
2. Seleksyon pwent zòrèy:
   • Select the ear tips that provide the most comfortable and secure fit for your ears. A good seal is crucial for optimal sound quality and noise isolation.
3. Pairing ak aparèy ou an:
   • Asire w ke Bluetooth aparèy ou an limen.
   • Louvri kouvèti bwat chaje a. Ekoutè yo ap antre otomatikman nan mòd koneksyon.
   • On your device, search for Bluetooth devices and select "Q8" from the list.
   • Yon fwa konekte, w ap tande yon konfimasyon sonab, epi ekoutè yo ap pare pou itilize.
   • The Hall Switch feature allows for quick re-connection to the last paired device simply by opening the case.
   

   Figure 4: Hall Switch and one-step pairing process.

5. Operasyon Enstriksyon

• Limen/Etenyen:
  • To power on, open the charging case. The earbuds will automatically turn on.
  • To power off, place the earbuds back into the charging case and close the lid. They will automatically disconnect and begin charging.
• Kontwòl manyen:
  • The earbuds feature intuitive touch controls for media playback and call management. Refer to the quick start guide for specific tap functions (e.g., single tap for play/pause, double tap for next track, etc.).
• Mode Gaming:
  • For a lag-free gaming experience, triple tap the left earbud to enter gaming mode. This reduces latency for synchronized audio and visuals.
  

  Figure 5: Activating Gaming Mode for reduced latency.

• Apèl:
  • Utilize the CVC8.0 noise cancelling technology and four microphones for clear conversations in various environments.

6. Antretyen

• Netwayaj:
  • Netwaye ekoutè yo ak bwat chaje a regilyèman avèk yon twal mou epi sèk.
  • Retire bout zòrèy yo epi netwaye yo avèk savon dou ak dlo si sa nesesè, asire w ke yo byen sèk anvan ou mete yo ankò.
  • Keep charging contacts on both earbuds and case free from dust and debris.
• Rezistans dlo (IPX5):
  • The earbuds are IPX5 water-resistant, meaning they can withstand sweat and light rain. They are not designed for submersion in water.
  • Avoid exposing the charging case to water.
  • If earbuds get wet, wipe them dry thoroughly before placing them back in the charging case.
  

  Figure 6: IPX5 water resistance for daily use.

NAN. Depanaj

• Ekoutè yo pa konekte:
  • Ensure the earbuds are charged and removed from the charging case.
  • Etenn epi aktive Bluetooth aparèy ou an, epi eseye chèche ankò.
  • Si li te deja konekte, eseye bliye aparèy la sou telefòn ou epi konekte l ankò.
• Ekoutè yo pa chaje:
  • Check that any protective plastic films have been removed from the earbud charging contacts.
  • Asire w ke kab chaje a byen konekte ak tou de bwat la ak sous kouran an.
  • Verify that the charging case itself has power (check LED indicators).
• Volim ki ba oswa kalite son ki pa bon:
  • Ajiste volim nan tou de sou aparèy ou an ak ekoutè yo.
  • Ensure ear tips are properly seated and provide a good seal in your ear canal. Try different sized ear tips.
  • Netwaye tout debri ki sou oratè ekoutè yo.

8. Espesifikasyon

9. Videyo pwodwi ofisyèl la

10. Garanti ak sipò

For warranty information, technical support, or any inquiries regarding your FEANS Q8 Wireless Earbuds, please refer to the contact details provided on the product packaging or visit the official FEANS websit. Kenbe resi acha ou pou reklamasyon garanti.