Povasee A50 Jump Starter with Air Compressor Instruction Manual

1. Enstriksyon Sekirite

Tanpri li tout avètisman ak enstriksyon sekirite yo anvan ou itilize pwodui sa a. Si ou pa swiv avètisman ak enstriksyon yo, sa ka lakòz chòk elektrik, dife ak/oswa blesi grav.

• Always wear safety glasses when jump starting a battery.
• Pa pèmèt cl a wouj ak nwaamps touche youn ak lòt.
• Pa sote kòmanse yon batri nan frizè.
• Ensure proper polarity connection (red to positive, black to negative).
• Kenbe soti nan atenn timoun yo.
• Pa ekspoze inite a ak lapli oswa kondisyon mouye.
• Do not operate the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down before resuming use.

2. Pwodwi souview

The Povasee A50 is a versatile device combining multiple essential functions for vehicle emergencies and portable power needs.

Karakteristik kle:

• 3000A Pik Kouran Sote Starter: Capable of jump-starting 12V vehicles with up to ALL GAS or 8.0L Diesel engines.
• 150PSI Air Compressor: Integrated tire inflator for car tires, bicycles, balls, and inflatable items.
• Bank pouvwa 23800mAh: Features QC3.0 Quick Charge USB ports and a Type-C input/output for charging mobile devices.
• 400-Lumen Emergency LED Light: Multiple lighting modes including constant light, SOS, and strobe.
• 12V DC Sòti: For powering 12V car accessories like vacuum cleaners or car refrigerators.
• Pwoteksyon Entelijan: Built-in safeguards against over-charge, over-discharge, over-current, short-circuit, over-voltage, over-temperature, reverse-polarity, reverse-connection, and over-load.

Kontni pake:

• Povasee A50 Jump Starter with Air Compressor
• Smart Jumper Cables
• USB-A pou USB-C chaje kab
• 12V DC Adapter (Cigarette Lighter Socket)
• Air Nozzle Adapters (for various inflatables)
• Manyèl itilizatè

Figure 1: Povasee A50 Jump Starter unit and all included accessories.

3. Espesifikasyon

Figure 2: Key specifications of the Povasee A50 Jump Starter.

4. Enstalasyon

Chaje Jump Starter la:

Before first use, fully charge the Povasee A50 unit. It is recommended to recharge the unit every 3 months to maintain battery health.

1. Connect the USB-A to USB-C charging cable to a compatible USB wall adapter (not included).
2. Plug the USB-C end into the Type-C input/output port on the jump starter.
3. The digital display will show the charging progress. The unit is fully charged when it reaches 100%.

Figure 3: The unit can charge external devices via its USB ports.

5. Operasyon Enstriksyon

5.1. Demaraj yon machin ak yon aparèy pou demaraj ak yon sovtaj

1. Ensure the jump starter unit is sufficiently charged (above 50% recommended).
2. Insert the smart jumper cable plug into the 'ENGINE START' port on the jump starter.
3. Konekte wouj (+) clamp nan tèminal pozitif batri machin lan.
4. Konekte nwa (-) clamp nan tèminal negatif batri veyikil la.
5. Ensure the smart jumper cable indicator light is solid green. If it shows red or blinks, check connections or battery status.
6. Demarre motè machin nan.
7. Once the engine starts, immediately remove the smart jumper cables from the vehicle battery, then from the jump starter unit.

Figure 4: Visual guide for jump starting your vehicle.

5.2. Itilizasyon Konpresè Lè a

1. Short press the power switch on the unit to activate the display.
2. Press the 'R' button to cycle through pressure units (PSI, BAR, KPA) and set the desired pressure using the '+' and '-' buttons.
3. Uncoil the air hose from the bottom of the unit and screw the air hose onto the tire valve stem or attach the appropriate adapter for other inflatables.
4. Turn on the air compressor switch located on the side of the unit. The compressor will start inflating.
5. Konpresè a ap sispann otomatikman yon fwa presyon predetèmine a rive.
6. Turn off the air compressor switch and disconnect the hose.

Figure 5: Visual guide for using the air compressor.

Figure 6: The air compressor comes with various needles for different inflation needs.

5.3. Sèvi ak limyè LED la

The unit features a powerful LED light for illumination during emergencies or low-light conditions.

1. Long press the main power button on the unit to turn on the constant LED light.
2. Short press the main power button again to switch to SOS mode (slow blinking).
3. Short press the main power button a third time to switch to Strobe mode (fast blinking).
4. Long press the main power button to turn off the LED light.

Figure 7: The LED light offers multiple modes for different situations.

5.4. Itilizasyon kòm yon Bank Pouvwa

The Povasee A50 can charge various electronic devices via its USB ports.

1. Ensure the jump starter unit is powered on.
2. Connect your device's charging cable to one of the USB-A (including QC3.0) or Type-C output ports on the jump starter.
3. Aparèy la ap kòmanse chaje aparèy ou an otomatikman.
4. For 12V accessories, plug the 12V DC Adapter into the DC output port and then connect your accessory.

Figure 8: The unit provides multiple output options for charging and powering devices.

6. Antretyen

• Store the unit in a cool, dry place away from direct sunlight and moisture.
• Recharge the unit at least once every 3 months to prolong battery life, even if not in use.
• Netwaye eksteryè inite a ak yon mou, damp twal. Pa sèvi ak pwodwi chimik piman bouk oswa abrazif.
• Inspect jumper cables and air hose for any damage before each use.

NAN. Depanaj

8. Garanti & Sipò

Povasee offers comprehensive customer support and warranty for its products.

• 24 Hours Customer Service: 7*24 customer service is available for any inquiries.
• 30 Days Worry-Free Return Policy: Enjoy a 30-day return period for peace of mind.
• 24 Months After-Sales Warranty: The product is covered by a 24-month warranty for manufacturing defects.

For further assistance, please refer to the contact information provided in your user manual or visit the official Povasee websit.

Figure 9: Povasee customer support and warranty details.