Entwodiksyon
This manual provides essential information for the safe and efficient use of your BRUNO BHK282 Fuji Hollow Kettle. This enamel cookware is designed for heat efficiency, allowing water to boil quickly and retaining heat effectively. Its glass surface resists odors and stains, making it easy to clean. The kettle is compatible with various heat sources, including gas and induction cookers.
Enfòmasyon sou Sekirite
- Sifas cho: The kettle's body and handle will become hot during and after use. Always use oven mitts or a thick cloth when handling the kettle.
- Sipèvizyon: Never leave the kettle unattended while heating water.
- Timoun ak bèt kay: Keep the kettle out of reach of children and pets, especially when hot.
- Konble: Do not overfill the kettle. Fill only to the maximum fill line to prevent boiling water from spilling.
- Empty Heating: Never heat an empty kettle, as this can damage the enamel coating and the kettle itself.
- Chanjman Tanperati: Avoid sudden temperature changes, such as placing a hot kettle under cold water, as this can cause the enamel to crack or chip.
- Itilizasyon mikwo ond: Bouyi sa a se PA an sekirite pou mikwo ond.
Enstalasyon
- Debake: Carefully remove the kettle and all packaging materials. Inspect the kettle for any damage.
- Premye lave: Before first use, wash the kettle thoroughly with warm, soapy water. Rinse well and dry completely.
- Konble: Open the lid and fill the kettle with fresh water. Do not fill past the maximum capacity mark (approximately 1.6 liters).
Enstriksyon Operasyon
- Mete sou yon sous chalè: Position the kettle on a compatible heat source. The kettle is suitable for direct flame, induction, sheath, halogen, radiant, and enchroheater cooktops. Ensure the kettle is stable.
- Chofaj dlo: Turn on the heat source. The enamel material is highly heat efficient, allowing water to boil quickly.
- Vide: Once water has reached the desired temperature, turn off the heat. Using oven mitts or a thick cloth, carefully grasp the handle and pour the hot water. Be mindful of steam.
Antretyen ak Swen
- Netwayaj: While the kettle is listed as dishwasher safe, hand washing with warm, soapy water is recommended to preserve the enamel's finish and the natural wood handle. Avoid abrasive cleaners, steel wool, or metal scouring pads, as these can scratch the enamel.
- Siye: Dry the kettle thoroughly after washing to prevent water spots and rust, especially around the rim and spout.
- Enamel Characteristics: Due to the nature of enamel, minor black spots or color unevenness may appear during the manufacturing process. These are normal and do not affect performance.
- Depo: Sere kettle a nan yon kote ki sèk.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Water not boiling quickly. | Insufficient heat, lid not properly closed. | Ensure the heat source is at an appropriate level. Check that the lid is securely in place to retain heat. |
| Handle is too hot to touch. | Normal operation for enamel kettles. | Always use oven mitts or a thick cloth when handling the hot kettle. |
| Stains or discoloration inside the kettle. | Mineral deposits from water. | Boil a solution of water and white vinegar (1:1 ratio) in the kettle, then let it sit for an hour before rinsing thoroughly. |
Espesifikasyon
- Modèl: BHK282
- Koulè: Ble vèt
- Kapasite: 1.6 lit (0.4 galon)
- Dimansyon (W x H x P): Approx. 8.5 x 7.1 x 5.1 inches (21.5 x 18 (including lid) x 13 cm)
- Pwa: Approx. 1.76 pounds (740g - 800g including lid)
- Materyèl kò: Enameled Steel Plate
- Materyèl manch: Natirèl Wood
- Materyèl kouvèti: Bwa
- Sous chalè konpatib: Direct Flame, Induction, Sheath, Halogen, Radiant, Enchroheater
- San danje pou mikwo ond: Non
- Sekirite pou machin alave: Wi (Li rekòmande pou lave alamen pou dire pi lontan)
- Peyi orijin: Thailand (Fuji Holo company factory)
Garanti ak sipò
For warranty information or product support, please refer to the retailer where the product was purchased or contact BRUNO customer service directly. Keep your proof of purchase for any warranty claims.