Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight

1. Enfòmasyon sou Sekirite

Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.

• Risk dife: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
• Risk chòk elektrik: Enstalasyon ki ap dirije Twous Retrofit mande pou konesans nan sistèm elektrik aparèy yo. Si ou pa kalifye, pa eseye enstalasyon. Kontakte yon elektrisyen ki kalifye.
• Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
• To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Sa a lamp is not intended for use with emergency exit luminaires or emergency lights.
• Anvan w eseye enstalasyon, tcheke kòd elektrik lokal ou a, paske li fikse estanda fil elektrik pou lokalite w la.
• The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
• Do not leave bare wires or exposed outside the wire nut connectors.
• Pa fè oswa chanje nenpòt twou ki louvri nan yon patiraj fil elektrik oswa konpozan elektrik pandan enstalasyon twous la.
• This product is ETL Listed and operates at 120VAC.

2. Pwodwi souview

The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.

• Enèji efikas: 9W LED, equivalent to 40W, consuming less power.
• Klate: 550 Lumens with anti-glare lighting and a 36° beam spread.
• Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
• Dimmable: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
• Segondè CRI: 90 CRI rating for accurate color appearance.
• Konstriksyon dirab: Features a durable cast aluminum body and deep recessed trim.
• Damp Klase: Apwopriye pou itilize nan damp locations such as bathrooms and kitchens.

Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black

3. Lis Pati

Asire w tout konpozan yo prezan anvan ou kòmanse enstalasyon an:

• LED Downlight with spring clips
• Junction Box (with integrated CCT selection switch)
• Connector cable (pre-attached to downlight and junction box)
• Mous Joint

Figi 3.1: Side view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.

4. Enstalasyon ak Enstalasyon

This downlight is designed for easy installation without the need for a traditional recessed can or housing.

1. Prepare Ouvèti a: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
2. Konekte fil elektrik: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
3. Chwazi Tanperati Koulè: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
4. Pozisyon Bwat Koneksyon an: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
5. Konekte Downlight la: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
6. Enstale Downlight la: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.

Figi 4.1: Dimansyon pwodwi pou planifikasyon enstalasyon.

Figure 4.2: CCT selection switch inside the junction box.

5. Operasyon Enstriksyon

Once installed, operating your Maxxima LED downlight is straightforward.

5.1. Color Temperature Selection

The desired color temperature (CCT) must be selected using the switch inside the junction box anvan installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.

Figure 5.1: Visual comparison of selectable color temperatures.

5.2. gradyasyon

This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.

Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.

6. Antretyen

The Maxxima LED downlight requires minimal maintenance.

• Netwayaj: Pou netwaye aparèy la, asire w ou pa gen kouran. Siye sifas la ak yon twal mou, sèk, oubyen yon ti kras mouye.amp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
• Pa gen okenn pati itilizatè yo ka fè sèvis: Sous limyè LED la entegre epi ou pa ka ranplase li. Pa eseye ouvri oswa repare aparèy la.

NAN. Depanaj

Si ou rankontre pwoblèm ak downlight ou a, gade pwoblèm ak solisyon komen sa yo:

8. Espesifikasyon

9. Garanti ak sipò

This Maxxima LED downlight is covered by a 3-ane garanti soti nan dat acha a.

For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima websit pou jwenn enfòmasyon kontak aktyèl.

Tanpri konsève prèv acha ou a pou rezon garanti.