1. Entwodiksyon
This manual provides essential information for the safe and effective installation, operation, and maintenance of the JIAYIN JYPC-4 Series Electromagnetic Plunger Pump. This pump is designed for applications requiring precise water suction and delivery, commonly found in hot water dispensers and similar systems. Please read this manual thoroughly before using the product and retain it for future reference.
2. Pwodwi souview
The JIAYIN JYPC-4 is a compact and efficient electromagnetic plunger pump. Key features include:
- Rated Voltage: AC 100V - 120V, 60Hz, 22W
- Pousantaj koule: 750 ±15% cc/min
- Presyon travay: ≥1.5 bar
- Mwayen travay: Water or non-corrosive liquids
- Materyèl: Konstriksyon plastik dirab
- Mòd kondwi: Elektwomayetik
Figi 1: Angle view of the JIAYIN JYPC-4 Series electromagnetic plunger pump, showing its compact design and main components.
Figi 2: Close-up view of the JIAYIN JYPC-4 pump, highlighting the electrical terminals and the product specification label.
Figure 3: Technical drawing providing detailed dimensions of the JIAYIN JYPC-4 pump in millimeters.
3. Espesifikasyon teknik
| Paramèt | Valè |
|---|---|
| Mak | JIAYIN |
| Modèl | JYPC-4 |
| Rated Voltage | AC 100V - 120V, 60Hz |
| Konsomasyon pouvwa | 22W |
| Pousantaj koule | 750 ±15% cc/min |
| Travay presyon | ≥1.5 bar |
| Kalite ponp | Ponp plonje |
| Pump Shaft Position | Orizontal |
| Impeller Structure | Closed Impeller |
| Number of Impellers | Single Stage |
| Pwa nèt | 137 ±5g (approx. 4.8 oz) |
| Materyèl | Plastik |
| Klas izolasyon | H |
| Kondwi mòd | Elektwomayetik |
| Metòd Koneksyon | Kanil |
| Tanperati anbyen | Ta 70℃ (158°F) |
| Tanperati likid | Tf 60℃ (140°F) |
| UPC | 607469294553 |
4. Enstriksyon Sekirite
Pou evite blesi oswa domaj, toujou obsève prekosyon sekirite sa yo:
- Sekirite elektrik: Ensure the pump is connected to a power source matching the specified voltage (AC 100V-120V, 60Hz). Disconnect power before any installation, maintenance, or troubleshooting.
- Konpatibilite likid: Use only with water or non-corrosive liquids. Using corrosive fluids can damage the pump and void the warranty.
- Limit Tanperati: Do not exceed the maximum ambient temperature of 70℃ (158°F) or fluid temperature of 60℃ (140°F).
- Enstalasyon apwopriye: Install the pump securely in a horizontal position as specified. Ensure all connections are tight to prevent leaks.
- Evite kouri sèk: Do not operate the pump without fluid, as this can cause severe damage.
- Vantilasyon: Ensure adequate ventilation around the pump to prevent overheating.
- Timoun ak bèt kay: Keep the pump and its components out of reach of children and pets.
5. Enstalasyon ak Enstalasyon
Swiv etap sa yo pou enstalasyon apwopriye:
- Montaj: Securely mount the pump in a horizontal position using appropriate fasteners. Refer to Figure 3 for dimensions and mounting points.
- Koneksyon likid: Connect the inlet and outlet tubes to the pump's cannula ports. Ensure a tight fit to prevent leaks. For flow testing, a 13.8-inch silicon tube with an outer diameter of 0.31 inches and an inner diameter of 0.16 inches is recommended for the water inlet port.
- Koneksyon elektrik: Connect the pump to a compatible AC 100V-120V, 60Hz power supply. Ensure wiring is done by a qualified professional if you are unsure.
- Priming (si sa nesesè): Depending on your system, you may need to prime the pump by ensuring the fluid path is filled with liquid before initial operation to prevent dry running.
6. Operasyon
Once installed and connected, operate the pump as follows:
- Pouvwa sou: Apply power to the pump. The electromagnetic mechanism will activate, initiating the plunger action.
- Siveye koule: Observe the fluid flow to ensure it is within the specified range of 750 ±15% cc/min and that the working pressure is maintained at or above 1.5 bar.
- Operasyon kontinyèl: The pump is designed for continuous operation (ED100%).
- Pouvwa Off: Disconnect power when the pump is not in use or when maintenance is required.
7. Antretyen
Regular maintenance ensures optimal performance and extends the pump's lifespan:
- Netwayaj: Periodically inspect the pump for any external dirt or debris. Clean with a soft, damp twal. Pa sèvi ak pwodwi chimik piman bouk.
- Koneksyon: Regularly check all fluid and electrical connections for tightness and signs of wear or corrosion.
- Kalite likid: Ensure the working fluid remains clean and free of particles that could clog the pump. If the fluid contains impurities, consider adding a filter to the system.
- Depo: If storing the pump for an extended period, ensure it is clean, dry, and stored in a cool, dry place away from direct sunlight and extreme temperatures.
NAN. Depanaj
Gade tablo ki anba a pou pwoblèm komen ak solisyon potansyèl yo:
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ponp pa kòmanse | Pa gen ekipman pou pouvwa Incorrect voltage Koneksyon elektrik ki lach | Tcheke sous pouvwa a Verify voltage matches pump rating Sekirize koneksyon elektrik |
| Low or no fluid flow | Inlet/outlet clogged Air in the system (not primed) Leak in fluid connections Kouri sèk | Inspect and clear blockages Premye ponp lan Tcheke ak sere boulon koneksyon yo Ensure fluid supply is constant |
| Bri dwòl pandan operasyon an | Lè nan sistèm lan Montaj ki lach Entèn obstruction | Senyen lè nan sistèm lan Sere boulon vis aliye yo Inspect for foreign objects (disconnect power first) |
| Leakage from connections | Koneksyon ki lach Damaged tubing/cannula | Tighten all fluid connections Replace damaged tubing or cannula |
9. Garanti ak sipò
For warranty information or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase. Any unauthorized disassembly or modification of the pump will void the warranty.