Manyèl Itilizatè Tronçonneuse San Fil Benchmark 16" - 60 Volt

1. Enfòmasyon enpòtan sou sekirite

Toujou li epi konprann tout avètisman sekirite, enstriksyon, ilistrasyon, ak espesifikasyon ki vini ak zouti elektrik sa a. Si ou pa swiv tout enstriksyon ki anba yo, sa ka lakòz chòk elektrik, dife, ak/oswa blesi grav.

Sekirite Jeneral sou Tronçonneuse

• Toujou mete ekipman pwoteksyon pèsonèl (PPE) ki apwopriye, tankou linèt sekirite, pwoteksyon pou zòrèy, gan, ak soulye solid.
• Kenbe tout pati nan kò a lwen chèn lan lè tronsoneuz la ap fonksyone.
• Do not operate a chainsaw with one hand. Serious injury to the operator, bystanders, or both may result from one-handed operation.
• Always ensure a firm footing and operate the chainsaw only when standing on a fixed, secure, and level surface.
• Fè atansyon ak rebondisman an. Rebondisman an ka rive lè nen oswa pwent gid la touche yon objè, oswa lè bwa a fèmen epi pense chèn si a nan koupe a.
• Never allow children or untrained persons to operate the chainsaw.

Sekirite batri

• Use only the charger specified by the manufacturer to recharge. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
• Do not use battery packs or tools that are damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion, or risk of injury.
• Pa ekspoze yon pake batri oswa zouti nan dife oswa tanperati twòp. Ekspozisyon nan dife oswa tanperati ki pi wo a 130 °C (265 °F) ka lakòz eksplozyon.
• Follow all charging instructions and do not charge the battery pack or tool outside of the temperature range specified in the instructions.

2. Pake kontni

Verifye ke tout atik yo prezan epi yo an bon kondisyon lè w ap ouvri pake a:

• Benchmark 16" Cordless Chainsaw Unit
• 16" Oregon Cutting Bar
• Oregon Saw Chain
• 60V Li-ion 2.5Ah Battery Pack (with SAMSUNG 21700 cell technology)
• Batri Charger
• Manyèl itilizatè

3. Pwodwi souview

Familiarize yourself with the main components of your Benchmark 16" Cordless Chainsaw.

Figi 3.1: An jeneral view of the Benchmark 16" Cordless Chainsaw, highlighting its ergonomic design and 16-inch bar.

Figi 3.2: Top view of the chainsaw, showing the battery compartment area and controls.

Key components include the motor housing, front handle, rear handle, chain brake, guide bar, saw chain, oil reservoir cap, and battery compartment.

4. Enstalasyon

4.1 Batri Chaje

Before first use, fully charge the 60V Li-ion battery pack. Connect the charger to a standard power outlet and insert the battery pack into the charger. The indicator light on the charger will show the charging status. Once fully charged, remove the battery from the charger.

4.2 Enstalasyon Ba ak Chèn

This chainsaw features tool-less chain tensioning for easy setup.

1. Ensure the battery pack is removed from the chainsaw.
2. Place the saw chain around the sprocket and guide bar. Ensure the cutting edges of the chain are facing the correct direction (refer to the arrow on the guide bar).
3. Align the guide bar over the mounting studs on the chainsaw body.
4. Engage the chain with the drive sprocket.
5. Secure the side cover and use the tool-less tensioning knob to adjust chain tension.

Figi 4.1: Close-up view of the 16-inch Oregon cutting bar and chain, illustrating the chain's position on the bar.

4.3 Tansyonman Chèn

Proper chain tension is crucial for safe and efficient operation. The chain should be snug against the guide bar, but still able to be pulled freely by hand. Adjust the tool-less tensioning knob until the chain is correctly tensioned. A new chain may stretch during initial use, requiring re-tensioning after the first few cuts.

4.4 Lubrification

This chainsaw features automatic lubrication. Before each use, check the oil reservoir level. Fill with appropriate bar and chain oil if necessary. Do not operate the chainsaw without sufficient lubrication, as this can cause damage to the bar and chain.

5. Operasyon Enstriksyon

5.1 Kòmanse Chainsaw la

1. Ensure the battery pack is fully charged and securely inserted into the battery compartment.
2. Mete tronçoneuz la sou yon sifas ki plat e ki solid.
3. Engage the chain brake by pushing the front hand guard forward until it clicks into place.
4. To start, disengage the chain brake by pulling the front hand guard back towards the handle.
5. Peze bouton blokaj sekirite a (si genyen) epi peze deklanche a pou demarre motè a.

5.2 Teknik Koupe

Always maintain a firm grip with both hands on the chainsaw handles. Keep your body balanced and avoid overreaching.

• Felling Cuts: For felling small trees, make a directional notch first, then a felling cut from the opposite side, slightly above the notch.
• Limbing: Remove branches from a felled tree. Work from the base of the tree towards the top, cutting smaller branches first. Be aware of branches under tension.
• rale: Cutting a felled tree into logs. Support the log to prevent pinching the chain. Cut from the top down if the log is supported at both ends, or from the bottom up (undercut) if supported at one end.

5.3 Kijan pou kanpe tronçoneuz la

Release the trigger switch to stop the motor. For immediate chain stoppage, push the front hand guard forward to engage the chain brake.

6. Antretyen

Antretyen regilye asire lonjevite ak operasyon an sekirite nan tronçoneuz ou a.

6.1 Netwayaj

After each use, remove the battery pack and clean the chainsaw. Use a brush or compressed air to remove sawdust, chips, and debris from the motor housing, chain brake mechanism, and cooling vents. Wipe down the exterior with a damp twal.

6.2 File chèn

A sharp chain is essential for efficient and safe cutting. Sharpen the chain regularly using a round file of the correct diameter (refer to chain manufacturer specifications) or have it professionally sharpened. Ensure all cutters are sharpened to the same length and angle.

6.3 Antretyen Gid Bar

Periodically remove the guide bar and clean the groove to remove accumulated sawdust and debris. Check the guide bar for wear, burrs, or damage. Flip the guide bar periodically to ensure even wear.

6.4 Depo

When not in use, store the chainsaw in a dry, secure location, out of reach of children. Ensure the battery pack is removed and stored separately in a cool, dry place. Engage the chain brake and use a guide bar cover to protect the chain.

NAN. Depanaj

Seksyon sa a adrese pwoblèm komen ou ka rankontre ak tronçoneuz ou a.

8. Espesifikasyon

9. Garanti ak sipò

Warranty information for the Benchmark 16" Cordless Chainsaw is not available in the provided product data. Please refer to the product packaging or contact Benchmark customer service for details regarding warranty coverage and support.