Manyèl Itilizatè DieHard 41-6646 Flach Rechargeable 3,400-Lumen ak Power Bank

Entwodiksyon

This manual provides instructions for the DieHard 41-6646 3,400-Lumen Water-Resistant Aluminum COB LED Rechargeable Flashlight with Power Bank. Please read this manual thoroughly before operating the device to ensure proper use and maintenance. Retain this manual for future reference.

Pwodwi souview

Karakteristik kle

• Mòd ekleraj: 3,400 lumens (flood + spotlight), 1,500 lumens (flood), 2,000 lumens (spotlight high), and 600 lumens (spotlight low).
• Distans gwo bout bwa: Ranges between 229 feet and 853 feet, depending on the mode.
• Dirab: Constructed from heavy-duty, military-grade aluminum.
• Rezistans dlo: IPX4 rated, providing protection against splashing water from any direction.
• Rezistans enpak: Drop tested to 3.2 feet.
• Fonksyon Bank pouvwa: Integrated power bank for charging external devices.

Eleman

Familiarize yourself with the main components of your DieHard flashlight:

Figi 1: An jeneral view of the DieHard 41-6646 flashlight, showcasing its black aluminum body and blue accents.

• Flashlight Head: Contains the COB LED for illumination.
• Kò: Aliminyòm casing housing the battery and internal electronics.
• Bouton pouvwa: Located at the tail cap for turning the flashlight on/off and cycling through modes.
• Pò chaje: A USB port located under a protective collar for recharging the flashlight and for power bank functionality.

Figure 2: Close-up of the flashlight head, highlighting the COB LED light source.

Figure 3: The tail cap of the flashlight, featuring the integrated power button.

Enstalasyon

Chaje flach la

Before first use, fully charge the flashlight. The device includes a Lithium Ion battery.

1. Locate the blue collar on the flashlight body. Twist or slide this collar to reveal the USB charging port.


Figure 4: The USB charging port revealed by sliding the blue collar.

2. Connect the provided USB charging cable to the flashlight's port.
3. Konekte lòt bout kab USB a nan yon sous kouran USB konpatib (pa egzanp, yon adaptè miray, yon pò USB òdinatè).
4. An indicator light will show charging status. Refer to the product packaging or specific indicator behavior for full charge notification.
5. Once fully charged, disconnect the cable and securely close the protective collar over the USB port to maintain water resistance.

Figure 5: The USB charging port securely covered by the blue collar.

Enstriksyon Operasyon

Powering On/Off and Changing Light Modes

The flashlight features multiple light modes. Press the tail cap power button to cycle through them:

1. Premye laprès: Activates Flood + Spotlight mode (3,400 lumens).
2. Dezyèm Press: Switches to Flood mode (1,500 lumens).
3. Twazyèm Press: Switches to Spotlight High mode (2,000 lumens).
4. Katriyèm Press: Switches to Spotlight Low mode (600 lumens).
5. Senkyèm laprès: Turns the flashlight off.

To turn off the flashlight from any mode without cycling through all modes, press and hold the power button for approximately 2 seconds.

Sèvi ak kòm yon Bank pouvwa

The DieHard 41-6646 can be used to charge other USB-powered devices.

1. Expose the USB charging port by twisting or sliding the blue collar.
2. Connect your device's charging cable to the flashlight's USB port.
3. Lanp lan pral kòmanse chaje aparèy ou an. Kontwole endikatè chaj aparèy ou an.
4. Disconnect your device once charging is complete and securely close the protective collar.

Antretyen

Netwayaj

• Siye kò flach la ak yon twal mou,amp twal.
• Pa sèvi ak pwodui netwayaj abrazif oswa solvan, paske sa yo ka domaje fini an oswa konpozan entèn yo.
• Ensure the charging port is free of dust and debris. Use a dry, soft brush if necessary.

Depo

• Sere flach la nan yon kote ki fre, sèk lwen limyè solèy la dirèk ak tanperati ekstrèm.
• For long-term storage, charge the battery to approximately 50% every 3-6 months to prolong battery life.

Depanaj

If you encounter issues with your DieHard flashlight, refer to the following common problems and solutions:

• Flashlight Not Turning On or Low Brightness:
  • Ensure the battery is fully charged. Connect to a power source and allow sufficient charging time.
  • Peze bouton pouvwa a byen fèm.
• Charging Issues (Flashlight not charging or cable not staying in port):
  • Verify the USB charging cable is fully inserted into the flashlight's port. The protective collar must be completely open to allow proper connection.
  • Ensure the charging cable and the USB power adapter are functional. Try a different cable or adapter if available.
  • Check the charging port for any obstructions or damage.
• Kout lavi batri:
  • High lumen modes consume battery power more rapidly. Consider using lower lumen modes for extended runtimes.
  • Ensure the flashlight is fully charged before each use.
• Overheating or Unusual Odor During Charging or Operation:
  • Immediately disconnect the flashlight from any power source and discontinue use.
  • Contact customer support for assistance. Do not attempt to disassemble or repair the device.

Espesifikasyon

Garanti ak sipò

Enfòmasyon sou Garanti

The DieHard 41-6646 flashlight comes with a 1-year limited warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, neglect, accident, unauthorized repair, or modification.

Tanpri kenbe prèv ou achte pou reklamasyon garanti.

Sipò pou Kliyan

For technical assistance, warranty claims, or questions regarding your DieHard flashlight, please refer to the contact information provided with your product packaging or visit the official DieHard websit pou resous sipò.