Entwodiksyon
The Trio Leuchten Roya 214269142 is an outdoor wall lamp designed for effective illumination around your home or garden. Crafted from durable die-cast aluminum in an anthracite finish, this lamp features an integrated motion sensor for enhanced security and convenience. Its IP44 rating ensures protection against splashing water, making it suitable for various outdoor environments. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new wall lamp.
Karakteristik kle:
- High-quality die-cast aluminum construction.
- Integrated motion sensor with 8m detection range and 100° angle.
- Pwoteksyon IP44 kont dlo k ap soti.
- Requires 1 x GU10 bulb (max. 35W), not included.
- Konsepsyon ki lejè ak kontra enfòmèl ant pou enstalasyon fasil.
Enstalasyon ak Enstalasyon
Avètisman sekirite: Always disconnect the main power supply before attempting any installation, maintenance, or bulb replacement. Installation should be performed by a qualified electrician if you are unsure.
- Dekonpoze: Carefully remove all components from the packaging and ensure all parts are present.
- Chwazi Kote: Select a suitable outdoor wall location, ensuring it is within reach of the electrical supply and provides the desired illumination coverage.
- Mounting Support: Secure the mounting bracket to the wall using appropriate screws and wall plugs for your wall type. Ensure the bracket is level and firmly attached.
- Fil elektrik: Connect the electrical wires from your mains supply to the lamp's terminal block. Follow the wiring diagram provided with the product and ensure correct polarity (Live, Neutral, Earth). All connections must be secure and insulated.
- Tache Lamp Kò: Tache l la avèk anpil atansyonamp body to the mounting bracket, ensuring no wires are pinched. Secure it with the provided screws.
- Mete anpoul: Insert one GU10 bulb (maximum 35W) into the lamp holder. LED GU10 bulbs are recommended for energy efficiency.
- Tès: Restore power and test the lampfonksyonalite a.
Image: Trio Leuchten Roya outdoor wall lamp mounted on a wall, showcasing konsepsyon li yo ak pwodiksyon limyè li yo.
Image: Technical drawing with dimensions for model 214269142, showing front, side, and top views.
Enstriksyon Operasyon
The Trio Leuchten Roya wall lamp is designed for automatic operation via its integrated motion sensor.
- Aktivasyon otomatik: Once power is supplied, the lamp will automatically turn on when motion is detected within its sensor range.
- Ranje Capteur Mouvman: The integrated motion sensor has a maximum detection range of 8 meters and a 100° detection angle.
- Sensibilite Capteur: Please note that the intensity or sensitivity of the motion sensor may not be adjustable on this model. The lamp may activate during daylight hours if motion is detected.
- Dire limyè: L laamp will remain illuminated for a preset duration after motion is detected. This duration is typically fixed and not user-adjustable.
Imaj: Devan view nan l laamp, showing the motion sensor.
Image: Detailed close-up of the integrated motion sensor.
Antretyen
To ensure the longevity and optimal performance of your Trio Leuchten Roya wall lamp, swiv direktiv antretyen sa yo:
- Netwayaj: Regilyèman netwaye l laamp's exterior with a soft, damp twal. Pa sèvi ak pwodui netwayaj abrazif, solvan, oswa pwodui chimik ki agresif, paske sa yo ka domaje fini an.
- Ranplasman anpoul: Before replacing the GU10 bulb, always disconnect the power supply. Allow the old bulb to cool down before handling. Insert the new GU10 bulb (max. 35W) securely into the socket.
- Enspeksyon: Detanzantan enspekte lamp for any signs of wear, damage, or loose connections. If any damage is observed, disconnect power and consult a qualified electrician for repair.
- Capteur Mouvman: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, leaves, spiderwebs) to ensure proper functionality.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Lamp pa limen. | Pa gen ekipman pou pouvwa. Anpoul defo. Kòrèk fil elektrik. | Check circuit breaker and power switch. Replace GU10 bulb. Verify wiring connections (consult electrician if needed). |
| Capteur mouvman an pa detekte mouvman. | Capteur bouche. Capteur a sal. Movement outside detection range. | Clear any obstructions from the sensor's view. Netwaye lantiy detèktè a. Ensure movement occurs within 8m and 100° range. |
| Lamp stays on continuously or turns on during daylight. | Sansiblite detèktè. Mouvman konstan nan zòn deteksyon an. Pwoblèm fil elektrik. | The sensor intensity may not be adjustable. Consider repositioning if possible. Remove sources of constant motion. Check wiring connections (consult electrician if needed). |
Espesifikasyon
- Nimewo Modèl: 214269142
- Mak: Trio
- Dimansyon (L x W x H): 11.6 cm x 7 cm x 15 cm
- Pwa: 495 g
- Materyèl: Mouri-jete aliminyòm
- Koulè: Anthracite
- Kalite anpoul: GU10 (pa enkli)
- Max watage: 35W
- Evalyasyon IP: IP44 (Protection against splashing water)
- Capteur Mouvman: Integrated, 8m detection range, 100° angle
- Sous pouvwa: Fil elektrik
- Itilizasyon: Deyò
Garanti ak sipò
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or further assistance, please contact TRIO customer service or visit their official websit.
TRIO Leuchten GmbH
(Contact details typically found on manufacturer's website or product packaging)