WGP Teleheer T6 Plus Motorcycle Bluetooth Headset User Manual

Entwodiksyon

This manual provides detailed instructions for the installation, operation, and maintenance of your WGP Teleheer T6 Plus Motorcycle Bluetooth Headset. Please read this manual thoroughly before using the device to ensure proper function and safety. The T6 Plus is designed for motorcycle riders, offering full-duplex Bluetooth real-time intercom communication, hands-free calling, music playback, and voice assistant integration.

Karakteristik kle

• Full Duplex Bluetooth Real-time Intercom: Stable signal transmission up to 1500 meters (93 MPH) with ceramic antenna.
• Hands-free & Multi-function Keys: Bluetooth 5.1 connectivity, supports call handling (answer/refuse/redial), music playback. Automatic switch to phone mode for incoming calls. Large button design for easy operation with gloves.
• IP65 Waterproof & Dustproof Design: Withstands various weather conditions, operational down to -15°F.
• HD Speakers & Ultra High Quality Sound: High-definition sound quality, especially for bass, with effective wind noise reduction.
• All-in-One Type-C Port: Integrated audio, data transfer, and charging.
• Long lavi batri: 850 mAh battery providing 30 hours of continuous use and 500 hours standby.

Kontni pake

Tanpri verifye ke tout atik yo prezan nan pakè ou a:

• WGP Teleheer T6 Plus Bluetooth Headset Unit (2 units for 2-pack)
• Moun kap pale kas
• Microphone (boom mic for open-face helmets, soft mic for full-face helmets)
• Mounting Clip (clamp and adhesive options)
• USB Kalite-C Chaje Kab
• Manyèl itilizatè

Image: A detailed diagram illustrating the components of the WGP Teleheer T6 Plus headset, including the main unit with its Type-C port, indicator light, and control buttons (OFF/ON, Volume+, Volume-, Telephone, Connect). It also shows the securing clip, microphone, and trumpet (speakers), providing a clear visual guide to the parts included and their connections.

Enstalasyon ak Enstalasyon

1. Chaje Aparèy la

Before first use, fully charge the T6 Plus headset. Connect the provided USB Type-C cable to the headset's Type-C port and the other end to a USB power adapter (not included). The indicator light will show charging status and turn off when fully charged.

• Tan pou chaje: Apeprè 2-3 èdtan.
• Indicator light: Red during charging, off when fully charged.

2. Enstale kas ekoutè a nan kas ou a

The T6 Plus can be installed using either the clamp mount or the adhesive mount.

1. Chwazi Kote Montaj: Select a flat area on the left side of your helmet where the headset unit can be easily accessed.
2. Enstale Oratè yo: Attach the speakers inside the helmet's ear pockets using the adhesive pads. Ensure they are positioned directly over your ears for optimal sound quality.
3. Enstale mikwofòn nan:
   • For full-face helmets: Use the soft wire microphone and position it inside the chin bar, close to your mouth.
   • For open-face or modular helmets: Use the boom microphone and position it in front of your mouth.
4. Monte Inite Prensipal la:
   • Clamp Mòn: Glise cl laamp between the helmet shell and the inner padding. Secure it tightly.
   • Mòn adezif: Clean the chosen surface on the helmet. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before use.
5. Konekte kab: Plug the speaker/microphone cable into the Type-C port on the main headset unit.

Image: A WGP Teleheer T6 Plus headset unit mounted on the side of a motorcycle helmet. This image demonstrates the typical installation position of the headset on a helmet, showing its compact design and how it integrates with the helmet's exterior. The control buttons are visible, indicating ease of access for the rider.

Enstriksyon Operasyon

1. Power On/Off

• Pouvwa sou: Peze epi kenbe la Bouton pouvwa for 3 seconds until the indicator light flashes.
• Pouvwa Off: Peze epi kenbe la Bouton pouvwa pou 3 segonn jiskaske limyè endikatè a etenn.

2. Bluetooth Pairing with Mobile Phone

1. Ensure the T6 Plus is powered off.
2. Peze epi kenbe la Bouton pouvwa for approximately 5-7 seconds until the indicator light flashes red and blue alternately, indicating pairing mode.
3. On your mobile phone, enable Bluetooth and search for "Teleheer T6 Plus".
4. Select "Teleheer T6 Plus" from the list of available devices to connect. Once connected, the indicator light will flash blue slowly.

3. Intercom Pairing (Two Units)

To establish intercom communication between two T6 Plus units:

1. Ensure both T6 Plus units are powered off.
2. On Unit 1, press and hold the Bouton pouvwa for 5-7 seconds until the indicator light flashes red and blue alternately.
3. On Unit 2, press and hold the Bouton pouvwa for 5-7 seconds until the indicator light flashes red and blue alternately.
4. Yon ti tan peze la Bouton pouvwa on either Unit 1 or Unit 2 (one short press). The units will search for each other.
5. Once connected, the indicator lights on both units will flash blue slowly, and you will hear a confirmation tone.

Image: A graphic illustrating the effective intercom range of the Teleheer T6 Plus (Bluetooth 5.1) compared to older Bluetooth 4.0 devices. The T6 Plus shows stable connections over 1500m, while older devices show unstable connections over shorter distances. This highlights the improved signal stability and range due to Bluetooth 5.1 and the ceramic antenna.

4. Phone Call Functions

• Reponn apèl: Kout peze la Bouton Telefòn.
• Fini apèl: Kout peze la Bouton Telefòn.
• Refize rele: Peze epi kenbe la Bouton Telefòn pou 2 segonn.
• Recomposition Dènye Nimewo: Doub peze la Bouton Telefòn.

5. Mizik lèktur

• Jwe/Poz: Kout peze la Bouton Telefòn.
• Pwochen Track: Kout peze la Volim moute bouton.
• Track Previous: Kout peze la Bouton Dawonn Volim.
• Ajisteman Volim: Peze epi kenbe la Volim monte / desann bouton pou ogmante oswa diminye volim.

6. Asistan Vwa (Siri/Asistan Google)

• Aktive Asistan Vwa: Doub peze la Bouton pouvwa.

Image: A graphic depicting the voice assistant feature of the Teleheer T6 Plus, showing a helmeted rider interacting with their phone via voice commands like "Hey Siri" or "Ok Google". This illustrates the hands-free convenience for navigation, calls, and other smartphone functions while riding.

Antretyen ak Swen

• Netwayaj: Siye inite kas ekoutè a ak yon twal mou, damp twal. Pa sèvi ak pwodui chimik piman bouk oswa pwodui netwayaj abrazif.
• Rezistans dlo: The device is IP65 waterproof. While it can withstand water jets, avoid submerging it in water for extended periods. Ensure the Type-C port cover is securely closed when not charging.
• Depo: Sere aparèy la nan yon kote ki fre epi sèk lè w pa ap itilize li. Evite tanperati ekstrèm.
• Swen batri: To prolong battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for long periods.

Image: A WGP Teleheer T6 Plus headset unit partially submerged in water with splashes, demonstrating its IP65 waterproof rating. The image emphasizes the device's ability to withstand water exposure, making it suitable for various weather conditions during riding.

Depanaj

Espesifikasyon

Garanti ak sipò

For warranty information and technical support, please refer to the official WGP websit la oubyen kontakte sèvis kliyan yo dirèkteman. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.

Pou plis asistans, ou ka vizite paj pwodwi sou Amazon or contact the seller directly through the Amazon platform.