HMF 46126-11 Small Safe with Electronic Combination Lock

1. Entwodiksyon

This manual provides essential instructions for the proper installation, operation, and maintenance of your HMF 46126-11 Small Safe. Designed for securing cash, valuables, and documents, this safe features a robust steel construction and an electronic combination lock for reliable protection. Please read this manual thoroughly before using the safe to ensure optimal performance and security.

Image 1.1: The HMF 46126-11 small safe, featuring its electronic keypad and emergency lock. The keypad includes a low battery warning indicator.

2. Enfòmasyon sou Sekirite

• Do not store the emergency keys inside the safe. Keep them in a secure, separate location.
• Avoid exposing the safe to extreme temperatures or humidity.
• Asire w ke kòf fò a byen monte pou anpeche moun retire li san otorizasyon.
• Change the factory default code immediately after initial setup.
• Do not use abrasive cleaners on the safe's surface.

3. Pake kontni

Verifye ke tout atik ki nan lis anba a yo enkli nan pakè ou a:

• 1 x HMF 46126-11 Small Safe
• 2 x Kle Ijans
• 2 x Metal Anchors
• 2 x fikse vis
• 1 x manyèl itilizatè

4. Pwodwi souview

Imaj 4.1: Enteryè view of the safe, showing space for A5 documents and small valuables, along with integrated key hooks on the door.

Image 4.2: Close-up of the electronic keypad, featuring number buttons, a rotary knob for opening, and indicator lights.

5. Enstalasyon

5.1 Chwazi yon kote

Select a discreet and secure location for your safe. It can be mounted to a wall or floor. Ensure the surface is solid enough to support the safe's weight and resist tampering.

5.2 Enstriksyon pou monte

The safe features pre-drilled holes for easy installation. Use the provided metal anchors and fixing screws to secure the safe.

1. Pozisyon san danje a nan kote ou vle a.
2. Mark the drilling points through the pre-drilled holes on the back or bottom of the safe.
3. Drill holes into the wall or floor using an appropriate drill bit (not included).
4. Insert the metal anchors into the drilled holes.
5. Align the safe with the anchors and secure it using the fixing screws. Tighten firmly.

Image 5.1: The safe's pre-drilled holes for wall or floor mounting, along with the included fixing hardware.

Imaj 5.2: Dèyè view of the safe, highlighting the pre-drilled holes for secure installation.

6. Inisyal Enstalasyon

6.1 Opening the Safe for the First Time

Lè ou resevwa kòf fò ou a, li pral fèmen. Sèvi ak youn nan kle ijans yo pou louvri li pou premye fwa.

1. Jwenn twou kle ijans lan, anjeneral li kache dèyè yon ti kouvèti sou panèl klavye a.
2. Mete yon kle ijans epi vire l nan sans zegwi mont lan.
3. While the key is turned, rotate the knob on the keypad counter-clockwise to open the safe door.

Image 6.1: Demonstrates inserting the emergency key into the hidden keyhole to unlock the safe.

6.2 Enstalasyon batri

The electronic lock requires batteries (typically AA, not always included). The battery compartment is usually located on the inside of the safe door.

1. Open the safe door using the emergency key.
2. Jwenn kouvèti konpatiman batri a sou anndan pòt la.
3. Remove the cover and insert the required batteries, ensuring correct polarity (+/-).
4. Ranplase kouvèti lòj batri a.

6.3 Setting Your Personal Combination Code

It is crucial to set your personal code immediately after installing batteries. The code can be 3 to 8 digits long.

1. Avèk pòt kòf fò a louvri, peze bouton wouj pou re-inisyalize a ki sitiye anndan pòt la, toupre gon an. Ou pral tande yon bip.
2. Sou klavye a, antre kòd ou vle a ki gen ant 3 a 8 chif.
3. Press the '#' button to confirm. You will hear a confirmation beep.
4. Test the new code with the door open before closing it. Enter your code, then rotate the knob counter-clockwise.

Image 6.2: A hand demonstrating the process of entering a personal access code on the electronic keypad.

7. Operasyon

7.1 Opening the Safe with Your Code

1. Enter your personal 3 to 8 digit code on the keypad.
2. Press the '#' button. The green light will illuminate, and you will hear a beep.
3. Within 5 seconds, rotate the knob counter-clockwise to open the door.

7.2 Fèmen epi bloke kòf fò a

1. Fèmen pòt ki an sekirite.
2. Rotate the knob clockwise to engage the locking bolts. The safe is now secured.

7.3 Emergency Opening

In case of forgotten code or dead batteries, you can use the emergency keys.

1. Locate the emergency keyhole (refer to Section 6.1).
2. Mete yon kle ijans epi vire l nan sans zegwi mont lan.
3. While the key is turned, rotate the knob counter-clockwise to open the safe door.

8. Antretyen

8.1 Ranplasman batri

When the 'LOW BATTERY WARNING' indicator lights up or the safe fails to open with the code, it's time to replace the batteries.

1. Open the safe using the emergency key (if batteries are completely dead).
2. Replace all batteries in the compartment (refer to Section 6.2).
3. Test the electronic lock with your code after replacement.

8.2 Netwayaj

Siye deyò kòf fò a ak yon twal mou.amp cloth. Do not use harsh chemicals or abrasive materials, as they can damage the finish or electronic components.

8.3 Key Care

Keep emergency keys in a safe, accessible location outside the safe. Avoid bending or damaging the keys.

NAN. Depanaj

10. Espesifikasyon

Image 10.1: Visual representation of the safe's external dimensions (23x17x17 cm) and internal capacity, suitable for A5 documents.

11. Garanti ak sipò

Your HMF safe is manufactured with quality and durability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support or inquiries, please contact HMF customer service through the official website or your point of purchase. Please have your model number (46126-11) ready when contacting support.