1. Entwodiksyon
Mèsi pou acha aasing the BRUNO Cube Timer Clock BCA026-WH. This compact and versatile device functions as both a digital clock and a timer, featuring an alarm, snooze, and backlight. Its intuitive design makes it suitable for various settings, from kitchen counters to office desks. Please read this manual carefully to ensure proper use and to maximize the product's lifespan.
Image 1.1: The BRUNO Cube Timer Clock BCA026-WH in white, displaying the time and its control buttons.
2. Enstalasyon
2.1. Enstalasyon batri
The BRUNO Cube Timer Clock requires two AAA batteries (included). Follow these steps to install them:
- Jwenn kouvèti konpatiman batri a sou dèyè aparèy la.
- Glise kouvèti a anba pou ouvri li.
- Mete de pil AAA, asire w polarite ki kòrèk la (+ ak -) jan yo endike anndan konpatiman an.
- Remèt kouvèti konpatiman batri a lè w glise l anlè jiskaske li fè yon klik pou l antre nan plas li.
Image 2.1: The battery compartment located on the back of the clock, showing where to insert two AAA batteries.
2.2. Premye Anrejistreman Dat ak Lè
After installing batteries, the display will show a default time. To set the current time and date:
- Peze epi kenbe la Revèy/Dat button (usually marked with a clock icon or 'M') to enter setting mode. The hour digits will flash.
- Sèvi ak la + epi - bouton pou ajiste lè a.
- Peze a Revèy/Dat button again to move to minute setting, then adjust with + epi -.
- Kontinye peze la Revèy/Dat button to cycle through year, month, and day settings, adjusting each with + epi -.
- Yon fwa tout paramèt yo fini, peze bouton an Revèy/Dat button one last time or wait a few seconds for the device to exit setting mode automatically.
- To switch between 12-hour and 24-hour display, press the + button while the time is displayed in clock mode.
3. Operasyon Enstriksyon
3.1. Switching Between Clock and Timer Modes
The device operates in two main modes: Clock Mode and Timer Mode. To switch between them, press the Mode button (often marked with an hourglass icon).
3.2. Setting and Using the Timer
The Cube Timer Clock features a unique rotary switch for quick timer activation and up to three preset timer patterns.
- Activating a Preset Timer: The top part of the clock can be rotated. Each side of the top cube may have a number (e.g., 1, 2, 3) corresponding to a preset timer duration. Simply rotate the top cube so the desired preset number faces upwards to start the timer.
- Setting Custom Timer: In Timer Mode, use the + epi - bouton yo pou mete tan kontaj ou vle a.
- Starting/Stopping Timer: Peze a Kòmanse/Stop button (often integrated with the Mode button or a separate button) to begin or pause the countdown.
- Timer Alarm: When the timer reaches zero, an electronic alarm will sound. Press any button to stop the alarm.
Image 3.1: Setting the timer by rotating the top cube to select a preset duration.
3.3. Setting the Alarm and Snooze
Pou mete alam la:
- In Clock Mode, press and hold the Alam button (marked with a bell icon) to enter alarm setting mode. The alarm hour digits will flash.
- Sèvi ak la + epi - bouton pou ajiste lè alam la.
- Peze a Alam button again to move to minute setting, then adjust with + epi -.
- Peze a Alam button one last time or wait for the device to exit setting mode.
- Pou aktive/dezaktive alam lan, peze bouton an Alam Peze bouton an yon ti moman. Yon ikòn alam ap parèt/disparèt sou ekran an.
Lè alam la son, peze la Snooze button (often the top surface of the clock or a dedicated button) to temporarily silence it. The alarm will sound again after a few minutes (typically 5-10 minutes). To turn off the alarm completely, press any other button.
Image 3.2: Setting the alarm time on the clock.
3.4. Fonksyon ekleraj dèyè
The display features a backlight for visibility in low-light conditions. To activate the backlight, press the Limyè button (if available) or briefly press the top surface of the clock. The backlight will illuminate for a few seconds and then turn off automatically.
4. Antretyen
4.1. Netwayaj
To clean your BRUNO Cube Timer Clock:
- Siye eksteryè a ak yon twal mou, sèk.
- Pou mak ki difisil pou retire, yon ti kras dampRense twal la avèk dlo ak yon savon dou, apresa siye l sèk imedyatman.
- Do not use abrasive cleaners, solvents, or immerse the device in water.
4.2. Ranplasman batri
When the display becomes dim or the functions stop working correctly, it's time to replace the batteries. Follow the battery installation steps in Section 2.1. Always replace both batteries at the same time with new ones of the same type (AAA).
NAN. Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Ekran an vid oswa li fèb. | Pil yo fèb oswa yo mal enstale. | Ranplase pil yo ak nouvo pil AAA, asire polarite ki kòrèk la. |
| Timer or alarm does not activate. | Timer/alarm not set correctly or not activated. | Review Section 3.2 and 3.3 to ensure timer/alarm is set and activated. |
| Bouton yo pa reponn. | Temporary electronic glitch or very low batteries. | Remove and reinsert batteries. If issue persists, replace batteries. |
6. Espesifikasyon
- Modèl: BCA026-WH
- Dimansyon: W58 x H78 x D58 mm
- Pwa: Apeprè 100 g
- Sous pouvwa: pil AAA x 2
- Fonksyon: Timer, 12/24 hour display, Date display, Electronic alarm, Snooze, Backlight
- Materyèl: ABS resin (main body)
- Peyi orijin: Lachin
7. Warranty Information & Support
7.1. Garanti
This BRUNO product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BRUNO websit.
7.2. Sipò pou Kliyan
If you encounter any issues or have questions regarding your BRUNO Cube Timer Clock that are not addressed in this manual, please contact BRUNO customer support. Contact information can typically be found on the product packaging, the official BRUNO websit entènèt la, oubyen atravè revandè ou a.