Marvel Legends Series 3.75-inch Retro 375 Collection Firestar Action Figure User Manual

Entwodiksyon

This manual provides essential information for the safe and proper use of your Marvel Legends Series 3.75-inch Retro 375 Collection Firestar action figure. Please read these instructions carefully before use and retain them for future reference.

Enfòmasyon enpòtan sou sekirite

AVÈTISMAN: Ti pyès ka pwodui. Pa pou timoun ki poko gen 3 an.

This product is intended for ages 4 and up. Adult supervision is recommended for younger children.

Ki sa ki nan bwat la

• 1 x Marvel Legends Series 3.75-inch Retro 375 Collection Firestar Action Figure

No assembly is required. The figure is ready to play directly out of the box.

Enstalasyon

1. Unboxing: Carefully remove the Firestar action figure from its retro-inspired packaging. Retain packaging for collector's value if desired.
2. Enspeksyon: Before play, inspect the figure for any manufacturing defects or damage.

Image: Marvel Legends Firestar action figure shown in its retro-inspired blister packaging, highlighting the classic design.

Operasyon ak Poze

The Firestar action figure features multiple points of articulation, allowing for various dynamic poses. Gently manipulate the joints to achieve desired stances.

• Tèt: Can be rotated and tilted.
• Zepòl: Rotate and move outwards.
• Koud: Bend to allow arm articulation.
• Ponyèt: Vire.
• Ranch: Rotate and move outwards.
• Knees: Bend to allow leg articulation.

Avoid excessive force when posing to prevent damage to the joints or figure.

Image: The Firestar action figure standing in a neutral pose, showcasing its articulation and design.

Antretyen ak Swen

• Netwayaj: To clean the figure, gently wipe it with a soft, dry cloth. For stubborn dirt, a slightly damp Ou ka itilize yon twal, epi seche l touswit apre sa. Evite pwodui chimik ki agresif oswa pwodui netwayaj abrazif.
• Depo: Sere figi a lwen limyè solèy dirèk, tanperati ekstrèm, ak imidite ki wo pou anpeche li dekolorasyon oswa materyèl la degrade.
• Manyen: Handle the figure by its main body parts rather than small accessories or delicate joints to minimize stress.

Depanaj

Joints are stiff:

Gently warm the joint area with warm water or a hairdryer on a low setting for a few seconds to loosen the plastic, then carefully attempt to move the joint. Do not overheat.

Figure does not stand:

Adjust the leg and foot articulation to find a stable center of gravity. Ensure the figure is placed on a flat, even surface.

Espesifikasyon

Garanti ak sipò

For information regarding warranty coverage or product support, please refer to the manufacturer's official websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe prèv acha ou pou nenpòt reklamasyon garanti.

Manifakti: Hasbro