SENA Parani M10 Bluetooth Motorcycle Headset User Manual

1. Entwodiksyon

This manual provides instructions for the installation, operation, and maintenance of your Sena Parani M10 Bluetooth Motorcycle Headset. The Parani M10 allows for seamless communication and entertainment while riding, featuring Bluetooth intercom capabilities and smartphone connectivity for music, GPS, and calls. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Pake kontni

The Parani M10 package typically includes the following components:

• Parani M10 Main Unit
• Filè Boom Mikwofòn
• Speakers (pair)
• Kask Clamp Twous
• USB Chaje Kab
• Kousinen Oratè
• Hook ak Loop Fastener pou Oratè
• Manyèl Itilizatè (dokiman sa a)

Figure 2.1: Parani M10 complete kit showing the main unit, wired microphone, and speakers.

3. Pwodwi souview

Familiarize yourself with the main unit's components and controls.

Figure 3.1: Parani M10 Main Unit Controls and Ports.

• Jog Dial: Used for volume control, menu navigation, and various functions.
• Bouton milti-fonksyon: Primary button for power, pairing, and call management.
• Ekspozisyon LCD: Shows battery status, volume level, intercom pairing status, and other operational information.
• DC Power Charging & Firmware Upgrade Port: For charging the device and updating its firmware.
• Speakers and Microphone Port: Connection point for the wired speakers and microphone.

4. Enstalasyon ak Enstalasyon

The Parani M10 is designed for easy installation on most motorcycle helmets.

4.1 Attaching the Main Unit to the Helmet

1. Chwazi yon kote ki apwopriye sou bò gòch kas ou a pou cl la.amp twous.
2. Dekole vis yo sou klou kas la.amp kit and slide it between the helmet shell and the inner padding. Ensure it is securely fastened.
3. Slide the Parani M10 main unit onto the clamp jiskaske li klike an plas.

Figure 4.1: Parani M10 unit installed on a helmet.

4.2 Enstalasyon Oratè ak Mikwofòn

1. Attach the hook and loop fasteners to the inside of your helmet, aligning them with your ears.
2. Press the speakers onto the fasteners. Ensure the speakers are positioned directly over your ears for optimal audio quality.
3. Attach the wired boom microphone to the inside of the helmet, positioning it close to your mouth but not directly in front of it to avoid wind noise.
4. Route the speaker and microphone wires neatly under the helmet padding to the main unit's port.
5. Connect the speaker/microphone cable to the corresponding port on the Parani M10 main unit.

4.3 Chaje Aparèy la

Before first use, fully charge the Parani M10. Connect the USB charging cable to the DC Power Charging Port on the main unit and to a USB power source. The LCD display will indicate charging status.

5. Operasyon Enstriksyon

5.1 Power On/Off

• Pouvwa sou: Peze epi kenbe bouton milti-fonksyon an pou 1 segonn.
• Pouvwa Off: Peze epi kenbe bouton Multi-fonksyon an pou 5 segonn.

5.2 Kontwòl Volim

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume. The LCD display will show the current volume level.

Figure 5.1: LCD display showing pairing status and volume.

5.3 Koneksyon telefòn entelijan

1. With the M10 powered off, press and hold the Multi-function Button for 5 seconds until the LED flashes red and blue, indicating pairing mode.
2. Sou telefòn entelijan ou an, ale nan paramèt Bluetooth yo epi chèche nouvo aparèy.
3. Select "Parani M10" from the list of available devices.
4. Once paired, the LED will flash blue, and the LCD will confirm connection.
5. You can now listen to music, GPS navigation, and make/receive phone calls through your headset.

5.4 Bluetooth entèrfon

The Parani M10 supports intercom communication with up to four other Parani users on its dedicated Bluetooth intercom network.

1. Koneksyon Entèkom:
   • Ensure both M10 units are powered on.
   • On one M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
   • On the second M10 unit, press and hold the Jog Dial for 5 seconds until the LED flashes red and blue.
   • The units will automatically search and pair. Once paired, the LED will flash blue.
   • Repeat this process for additional units (up to four total).
2. Starting/Ending Intercom Conversation:
   • To start an intercom conversation, tap the Jog Dial.
   • To end an intercom conversation, tap the Jog Dial again.

5.5 Apèl nan telefòn

• Reponn apèl: Tape bouton milti-fonksyon an.
• Fini apèl: Tape bouton milti-fonksyon an.
• Rejte apèl: Peze epi kenbe bouton Multi-fonksyon an pou 2 segonn.
• Rele vwa: In standby mode, press and hold the Multi-function Button for 3 seconds. (Requires smartphone support for voice commands).

6. Antretyen

6.1 Netwayaj

Siye inite prensipal la ak yon mou, damp cloth. Do not use harsh chemicals or solvents. Ensure all ports are dry before charging or use.

6.2 Swen Batri

• Chaje aparèy la regilyèman, menm si w pa ap itilize l, pou batri a rete an bon eta.
• Avoid storing the device in extreme temperatures.
• Do not attempt to replace the internal battery yourself. Contact Sena support for battery service.

6.3 Mizajou Firmware

Tcheke Sena a detanzantan website for firmware updates. Updating the firmware can improve performance and add new features. Connect the device to your computer using the USB cable and follow the instructions provided by Sena's Device Manager software.

NAN. Depanaj

7.1 Reset faktori

If issues persist, a factory reset may resolve them. To perform a factory reset, press and hold the Multi-function Button and the Jog Dial simultaneously for 10 seconds. The device will reset to its default settings.

8. Espesifikasyon

Note: Specifications are subject to change without notice. Actual performance may vary based on environmental conditions and usage.

9. Garanti ak sipò

9.1 Enfòmasyon sou Garanti

Sena products are covered by a limited warranty from the date of purchase. For detailed warranty terms and conditions, please refer to the official Sena websit la oswa kat garanti ki vini ak pwodwi ou a. Kenbe prèv acha ou pou reklamasyon garanti.

9.2 Sipò pou Kliyan

Pou asistans teknik, depanaj, oswa kesyon jeneral, tanpri vizite sit ofisyèl Sena a. website for support resources, FAQs, and contact information. You can also reach out to your local dealer for assistance.

• Sena Websit: www.sena.com
• Parani Websit: www.parani.com