Manyèl Itilizatè Bisiklèt Elektrik Pliyab FIIDO D3 Pro a

Entwodiksyon

This user manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your FIIDO D3 Pro Foldable Electric Bicycle. Please read this manual thoroughly before using the bicycle to ensure proper handling and to prevent damage or injury.

The FIIDO D3 Pro is a lightweight and robust electric bicycle designed for various terrains, offering three riding modes: pure electric, cycling, and electric assist. Its foldable design allows for convenient storage and transport.

Enstriksyon Sekirite

Always prioritize safety when operating your e-bike. Adhere to local traffic laws and regulations. Wear appropriate safety gear, including a helmet, at all times.

• Asire ke tout eleman yo byen tache anvan chak woulib.
• Check tire pressure and brake functionality regularly.
• Pa opere e-bisiklèt la anba enfliyans alkòl oswa dwòg.
• Fè atansyon ak anviwònman w ak danje potansyèl yo.
• Evite monte bisiklèt nan kondisyon metewolojik ekstrèm.
• The maximum load capacity for this e-bike is 120 kg. Do not exceed this limit.

Enstalasyon

Unfolding the Bicycle

The FIIDO D3 Pro comes in a folded configuration for transport. Follow these steps to unfold and prepare your bicycle for use:

1. Place the folded bicycle on a flat, stable surface.
2. Release the frame latch and carefully unfold the main frame until it locks into place. Ensure the latch is securely engaged.
3. Adjust the handlebar stem to the upright position and secure the quick-release lever.
4. Extend the seat post to your desired riding height and tighten the quick-release clamp. Ensure the minimum insertion mark is not visible.
5. Deploye pedal yo.

Premye chaj batri

Before your first ride, fully charge the battery. The charging time is approximately 5 hours.

• Locate the charging port on the bicycle.
• Connect the charger to the charging port and then to a standard 100-240V AC power outlet.
• The LED indicator on the charger will change color (e.g., red to green) when charging is complete.
• Dekonekte plato a yon fwa batri a konplètman chaje.

Image: The FIIDO D3 Pro electric bicycle shown in both its compact folded state and its fully unfolded, ready-to-ride configuration. This illustrates the ease of storage and deployment.

Enstriksyon Operasyon

Limen / Off

To power on the e-bike, press and hold the power button on the LED display. To power off, press and hold the power button again.

Mòd monte

The FIIDO D3 Pro offers three distinct riding modes:

• Mòd elektrik pi: Engage the throttle to ride without pedaling. This mode is supported for effortless cruising.
• Mòd monte bisiklèt: Ride the bicycle like a traditional bike, using pedal power only. The electric system is off.
• Electric Power Assist System (PAS): This mode provides electric assistance as you pedal. The D3 Pro features a 3-gear electric assist system.
  • First Gear Assist Speed: Approximately 10 km/h
  • Second Gear Assist Speed: Approximately 15 km/h
  • Third Gear Assist Speed: Approximately 20 km/h

  Note: Actual assist speeds may vary based on rider weight, environment, and road conditions.

Kovèti pou chanjman

The bicycle is equipped with a single-speed drivetrain (12 teeth gear) and a PROWHEEL steel 52 teeth chain plate. Shifting between electric assist gears is done via the controls on the handlebar.

Frenaj

The FIIDO D3 Pro features mechanical front and rear dual disc brakes for stable and quick stopping power. Apply both brakes simultaneously for optimal braking performance. Avoid sudden, hard braking, especially at high speeds or on slippery surfaces.

Antretyen

Regular maintenance is crucial for the longevity and safe operation of your FIIDO D3 Pro e-bike.

Netwayaj

• Clean the bicycle regularly with a damp twal. Evite sèvi ak machin pou lave anba presyon dirèkteman sou konpozan elektrik yo.
• Do not immerse the e-bike in water.

Swen batri

• Charge the battery regularly, even if the e-bike is not in use for extended periods (at least once every 2 months).
• Sere batri a nan yon kote ki fre epi sèk, lwen limyè solèy dirèk ak tanperati ekstrèm.
• Do not disassemble or attempt to repair the battery pack.

Tires and Brakes

• Check tire pressure before each ride. The 14-inch tires should be inflated to the recommended pressure indicated on the tire sidewall.
• Enspekte plak fren yo pou wè si yo ize epi ranplase yo lè sa nesesè.
• Ensure brake levers are firm and responsive. Adjust brake cables if there is excessive slack.

Enspeksyon Jeneral

• Tcheke tout boulon ak nwa yo detanzantan pou wè si yo byen sere.
• Lubricate the chain regularly with bicycle chain lubricant.
• Enspekte ankadreman an pou nenpòt siy domaj oswa fant.

Depanaj

This section provides solutions to common issues you might encounter with your FIIDO D3 Pro e-bike. For problems not listed here, please contact customer support.

Espesifikasyon

Detailed technical specifications for the FIIDO D3 Pro Foldable Electric Bicycle:

Garanti ak sipò

FIIDO aims to provide excellent customer service. For warranty information, technical support, or spare parts, please refer to the official FIIDO websit la oubyen kontakte pwen acha ou a.

If you have questions regarding our products and services, do not hesitate to contact us. We are committed to providing a satisfactory solution.