1. Pwodwi souview

The Makerbase MKS Monster8 V2 is a 32-bit control board designed for advanced 3D printers, offering extensive features and compatibility. It is suitable for large 3D printers such as Voron 2.4 and Creality Ender-3 series (Ender-3, Ender-3 V2, Ender-3 Pro).

Karakteristik kle:

• 8 Stepper Drivers: Supports multiple motor drives including A4988, DRV8825, LV8729, TMC2208, TMC2209, TMC2225, TMC2226.
• 9 Motor Interfaces: Driver0, 1, 2-1, 2-2, 3, 4, 5, 6, 7 for flexible configurations.
• Sipò pou firmwèr: Compatible with Marlin 2.0.x and Klipper (requires a Klipper host like Raspberry Pi or MKS PI).
• Konpatibilite ekspozisyon: Supports LCD2004, LCD12864, MKS MINI12864 V1.0/V3.0, and MKS touchscreens (MKS TFT24, MKS TFT28, MKS TFT32, MKS TFT35, MKS H43).
• Expansion Functions: 6 endstops with power select (X-, X+, Y-, Y+, Z-, Z+), 3D TOUCH (PA8) interface, DFU mode via Boot0 button, driver power select (5V or 3.3V), TMC UART and SPI mode, SENSORLESS_HOMING (Diag0-5), integrated SPI communication micro SD card, reserved SPI signal UDISK, and virtual USB device.
• MCU: STM32F407VET6, 168MHz, 512KB flash, 192KB RAM, built-in CAN transceiver and interface.
• Antre pouvwa: DC12-24V.
• Sorti pouvwa: 2 MP1584EN outputs (DC12V for fans and DC5V), 3 PWM fans + 3 power outputs (selectable VIN, DC12V, DC5V).
• Pwoteksyon: TVS power spike processing, 4KB EEPROM on board.
• Koneksyon: Type-C online serial port.

2. Gid Enstalasyon

2.1 Enstalasyon chofè

Before connecting any components, ensure the motor drivers are correctly installed. For Dir/Step mode, insert the jumper cap into the pins marked with a red box in the diagram. The video below demonstrates using the TMC2209 driver in Dir/Step mode as an example.

2.2 Koneksyon fil elektrik

Carefully follow the wiring diagram and instructions to connect all components. Pay close attention to positive and negative poles for power connections.

1. Pwovizyon pou pouvwa: Connect the main power supply (+POWER+ 12/24V).
2. Kabann chofe: Connect the heated bed, paying attention to the positive and negative poles (+HBED-).
3. Hotend: Connect the hotend (-HE0+).
4. Fanatik: Connect the always-on fan and controllable fan.
5. Thermistors: Connect the hotend thermistor (TH0) and heated bed thermistor (TB).
6. Endstops: Connect the X-axis endstop (X-), Y-axis endstop (Y-), and Z-axis endstop (Z-).
7. Motè: Connect the X-axis motor (Driver0), Y-axis motor (Driver1), Z-axis motor (Driver2-1), and Extruder motor (Driver3).
8. Ekspozisyon: Connect the MKS TS35 touchscreen display to EXP1 and EXP2 using DuPont wires.

2.3 Firmware Configuration (Marlin)

To ensure proper functionality, the Marlin firmware needs to be configured for the MKS Monster8 V2 board. Refer to the official Makerbase GitHub for the latest firmware and detailed instructions. Key configuration steps include:

• Set the mainboard name to BOARD_MKS_MONSTER8 in Configuration.h.
• Mete SERIAL_PORT pou -1.
• Set the user interface to TFT_COLOR_UI.
• Pèmèt SDSUPPORT.
• Pèmèt SDCARD_CONNECTION_ONBOARD in pins_MKS_MONSTER8.h.
• Pèmèt EEPROM_SETTINGS epi EEPROM_CHITCHAT.
• Mete default_envs = mks_monster8 in platformio.ini.
• Mete EXTRUDERS rive 1.
• Mete TEMP_SENSOR_0 epi TEMP_SENSOR_BED rive 1.
• Pèmèt USE_XMIN_PLUG, USE_YMIN_PLUG, USE_ZMIN_PLUG.
• Mete X(Y,Z)_MIN_ENDSTOP_INVERTING pou true.
• Mete X(Y,Z)_HOME_DIR pou -1.
• Mete X(Y)_BED_SIZE pou 200 epi Z_BED_SIZE pou 250.
• Mete X_DRIVER_TYPE pou TMC2209 (adjust for other drivers as needed).
• Mete INVERT_X(Y,E0)_DIR pou false epi INVERT_Z_DIR pou true.
• Pèmèt MESH_BED_LEVELING epi LCD_BED_LEVELING.

For detailed firmware configuration, please visit the official Makerbase GitHub repository: https://github.com/makerbase-mks/MKS-Monster8

2.4 Mizajou mikrolojisyèl

After compiling the firmware, copy the "asset" folder and the .bin file generated after compilation to the root directory of the SD card. Insert the SD card into the mainboard's slot, then turn on the power to update the firmware. The display will show the update progress.

3. Operasyon Enstriksyon

Once the MKS Monster8 V2 board is installed and firmware updated, you can operate your 3D printer using the connected display. The display allows for control over various printer functions.

3.1 Basic Movement and Controls

Use the touchscreen or rotary encoder on your MKS display to navigate menus and control printer axes (X, Y, Z) and the extruder. This allows for manual positioning and filament loading/unloading.

3.2 Initiating a Print

After preparing your G-code file on an SD card, insert it into the display's SD card slot (if applicable) or the mainboard's slot. Navigate to the print menu on the display and select your file to begin printing. Ensure the heated bed and hotend reach the desired temperatures before printing starts.

4. Antretyen

Regular maintenance ensures the longevity and optimal performance of your MKS Monster8 V2 control board.

• Kenbe pwòp: Regularly clean the board and surrounding area to prevent dust and debris accumulation, which can lead to overheating or short circuits.
• Evite imidite: Ensure the control board is kept in a dry environment to prevent damage from moisture or humidity.
• Tcheke Koneksyon: Periodically inspect all wiring connections to ensure they are secure and free from wear or damage. Loose connections can cause intermittent issues or component failure.
• Mizajou mikrolojisyèl: Stay updated with the latest firmware releases from Makerbase to benefit from bug fixes, performance improvements, and new features.

NAN. Depanaj

This section addresses common issues and their solutions for the MKS Monster8 V2 control board.

5.1 Power-Related Issues

• Kat la pa limen: If the board does not power on, first check if the power supply wiring is reversed. The MKS Monster8 V2 includes TVS power supply anti-reverse and spike protection, preventing damage from incorrect polarity, but the board will not function until correctly wired.
• Raspberry Pi "Currently Throttled" Error: The MKS Monster8 V2 provides a stable DC 5.1V/3A power output specifically designed for Raspberry Pi. If you encounter a "Currently Throttled" error, ensure your Raspberry Pi is connected to this dedicated power interface on the Monster8 V2 to avoid voltage and current instability.

5.2 Motor and Sensor Protection

• Stepper Motor Damage: The board features a protection circuit for back electromotive force (EMF) generated by stepper motors. This significantly reduces potential damage to motor drivers, even if the print head is manually moved or obstructed.
• Domaj ESD: The motherboard's MOS drive circuit and temperature measurement circuit are protected by Schottky diodes, reducing damage from external static electricity spikes. The board has been tested to withstand 4kV of static electricity.
• PL08N Leveling Sensor Issues: The PL08N leveling sensor signal interface is protected by Schottky diodes with a withstand voltage of 40V. This ensures that the signal pin of the chip will not be burned out due to sensor-related issues.

6. Espesifikasyon

7. Sipò ak Resous

For further assistance, firmware updates, and community support, please refer to the following official Makerbase resources:

• Repozitwa ofisyèl GitHub la: https://github.com/makerbase-mks/MKS-Monster8 (for firmware and technical documentation)
• Chèn YouTube: https://www.youtube.com/@makerbaseteam4217 (for video tutorials and guides)
• Paj Facebook: https://www.facebook.com/Makerbase.mks/ (for community interaction and updates)