HECO Aurora Subwoofer 30A Instruction Manual

1. Entwodiksyon

Thank you for choosing the HECO Aurora Subwoofer 30A. This active bass reflex subwoofer is designed to deliver powerful and precise low-frequency sound, enhancing your home theater, music, and gaming experiences. This manual provides essential information for proper setup, operation, and maintenance of your subwoofer.

2. Pwodwi Features

• Powerful active subwoofer with a 30 cm (12-inch) high-power woofer and a high-performance Class A/B amplifier, delivering up to 250 Watts maximum output.
• Front-firing design for flexible placement and optimal bass dispersion.
• Elegant silk matte lacquer finish combined with modern wood decors.
• Equipped with Resonance-damping Extended Surface Damper (ESD) for reduced cabinet vibrations.
• Front cover with acoustic fabric and invisible magnetic attachment for a clean aesthetic.
• Craft paper cone woofer, consisting of renewable source pulp with German-made wool fibers for high stiffness and accurate bass reproduction.
• Robust cabinet construction, approximately 1 inch thick, with an L-shaped baffle made from a dead-resin material to eliminate resonance.

3. Ki sa ki nan bwat la

Lè w ap debale, tanpri asire w tout bagay yo la epi yo an bon kondisyon:

• HECO Aurora Subwoofer 30A Unit
• Front Cover (with acoustic fabric)
• Pouvwa kab
• Manyèl Enstriksyon (dokiman sa a)

4. Gid Enstalasyon

4.1 Debalaj ak plasman

Carefully remove the subwoofer from its packaging. Place the subwoofer on a stable, level surface. The front-firing design allows for flexibility in placement, but generally, placing it in a corner or along a wall can enhance bass output. Experiment with different positions to find the best sound for your room.

Imaj: Devan view of the HECO Aurora Subwoofer 30A, showcasing its sleek design and front-firing woofer.

4.2 Koneksyon

Ensure your audio system (AV receiver, amplifier) is turned off before making any connections.

1. Koneksyon pouvwa: Connect the provided power cable to the AC inlet on the rear of the subwoofer and then to a suitable wall outlet.
2. Antre odyo: The Aurora Subwoofer 30A supports RCA or 3.5mm jack connectivity.
   • RCA Input (Recommended for AV Receivers): Connect an RCA cable from the "SUBWOOFER OUT" or "LFE OUT" port on your AV receiver to the "L" (Left) RCA input on the subwoofer. If your receiver has a stereo subwoofer output, connect both "R" and "L" inputs.
   • 3.5mm Jack Input (for other devices): If connecting to a device with a 3.5mm audio output, use an appropriate adapter cable to connect to the RCA inputs.

Image: Rear panel of the HECO Aurora Subwoofer 30A, showing the input ports, volume, frequency, and phase controls, and power switch.

5. Operasyon Enstriksyon

5.1 Limen/Etenyen

• Main pouvwa switch: Locate the main power switch on the rear panel. Flip it to the "ON" position to power on the subwoofer.
• Otomatik On/Off: The subwoofer features an "AUTO" mode. When set to "AUTO", the subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity. For continuous operation, set the switch to "ON".

5.2 Ajisteman Kontwòl yo

The rear panel features several controls to fine-tune the subwoofer's performance to your listening environment and preferences:

• Volim: Ajiste nivo pwodiksyon jeneral subwoofer la. Kòmanse ak yon reglaj ki ba epi ogmante piti piti jiskaske bas la melanje san pwoblèm ak oratè prensipal ou yo.
• Frequency (Crossover): This knob sets the upper frequency limit for the subwoofer. It typically ranges from 50 Hz to 150 Hz. Adjust this to match the low-frequency capabilities of your main speakers. If your main speakers have good bass extension, set it lower (e.g., 80 Hz). If they are smaller, set it higher.
• Faz (0°/180°): This switch adjusts the phase of the subwoofer's output relative to your main speakers. Experiment with both settings (0° and 180°) to find the one that produces the most impactful and coherent bass at your listening position. The correct setting will result in stronger, more defined bass.

For optimal integration, it is recommended to use your AV receiver's automatic room correction system (if available) after initial manual adjustments.

6. Antretyen

• Netwayaj: Use a soft, dry cloth to clean the cabinet. Avoid abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.
• Pousyè: Regularly dust the subwoofer, especially the woofer cone and rear panel, to prevent dust buildup.
• Plasman: Ensure the subwoofer is placed in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
• Grille: The magnetic grille can be removed for cleaning or if you prefer the aesthetic of the exposed woofer. Handle with care.

NAN. Depanaj

8. Espesifikasyon

Image: Diagram showing the dimensions of the HECO Aurora Subwoofer 30A: 22.5 inches deep, 17.75 inches wide, and 20.5 inches high.

9. Garanti ak sipò

The HECO Aurora Subwoofer 30A comes with a Full Warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty card included with your product or contact HECO customer support directly.

For technical support, service, or any questions not covered in this manual, please visit the official HECO websit la oubyen kontakte depatman sèvis kliyan yo. Kenbe resi acha w la kòm prèv acha pou reklamasyon garanti.