Manyèl Itilizatè Routeur Teltonika RUTX14 CAT12 4G LTE

1. Entwodiksyon

The Teltonika RUTX14 is a high-performance industrial cellular router designed for mission-critical applications requiring reliable and secure internet connectivity. Featuring CAT12 LTE for high-speed data transfer, dual-band Wi-Fi (802.11ac), GNSS/GPS capabilities, and Bluetooth, the RUTX14 provides robust networking solutions for various environments. This manual provides essential information for the proper installation, configuration, and operation of your RUTX14 router.

2. Enfòmasyon sou Sekirite

• Always disconnect power before performing any maintenance or installation procedures.
• Asire w ke aparèy la enstale nan yon zòn ki byen ayere pou anpeche li chofe twòp.
• Use only the power adapter and accessories provided or approved by Teltonika.
• Pa ekspoze aparèy la nan dlo, imidite, oswa tanperati ekstrèm.
• This device is intended for indoor use unless specifically rated for outdoor environments.

3. Pake kontni

Verifye ke tout atik yo prezan nan pakè ou a:

• Teltonika RUTX14 Router
• Adaptè pouvwa
• Mobile Antennas (x4)
• WiFi Antennas (x2)
• GNSS Antenna (x1)
• Ethernet kab
• Gid Quick Start

4. Aparèy souview

Familiarize yourself with the physical components and ports of the RUTX14 router.

Imaj 4.1: Labeled diagram of the Teltonika RUTX14 router, highlighting all external ports and connectors for easy identification. This includes mobile antenna connectors, GNSS antenna connector, WiFi antenna connectors, Bluetooth antenna connector, USB port, grounding screw, SIM card slots, reset button, 4-pin power socket, LAN ports, and WAN port.

Front Panel

Imaj 4.2: Fèmen view of the RUTX14's front panel. This image displays the PWR LED, Reset button, WiFi 2.4GHz and 5GHz LEDs, SIM1 and SIM2 slots, four LAN ports, one WAN port, and status LEDs for WAN, SIM1, SIM2, WiFi, ETH, 3G/4G, and signal strength.

• PWR ki ap dirije: Endike estati pouvwa.
• Bouton RESET: Used to restore factory defaults or reboot the device.
• WiFi LEDs (2.4/5): Indicate Wi-Fi activity for respective bands.
• SIM1/SIM2 Slots: For inserting cellular SIM cards.
• Pò LAN (1-4): Ethernet ports for local network connections.
• Pò WAN: Ethernet port for Wide Area Network connection (e.g., to an upstream modem).
• LED estati: Provide visual feedback on WAN, SIM status, Wi-Fi, Ethernet, 3G/4G connectivity, and cellular signal strength.

Side Panel

Imaj 4.3: Detaye view of the RUTX14's side panel. This image shows the various antenna connectors: Mobile AUX (x4), Mobile MAIN (x1), GPS (x1), WiFi (x2), and BT (x1). Also visible are the USB port and the grounding screw.

• Mobile Antenna Connectors (MAIN/AUX): For connecting cellular antennas.
• GPS Antenna Connector: For connecting a GNSS/GPS antenna.
• WiFi Antenna Connectors: For connecting Wi-Fi antennas.
• Konektè antèn BT: For connecting a Bluetooth antenna.
• Pò USB: For connecting external devices or storage.
• Vis Terre: For proper grounding of the device.

5. Enstalasyon Materyèl

5.1. Enstalasyon Kat SIM

1. Locate the SIM card slots on the front panel.
2. Using a SIM ejector tool or a paperclip, press the small button next to the SIM slot to open the tray.
3. Insert your activated Nano-SIM card(s) into the tray(s) with the gold contacts facing down.
4. Dousman pouse plato a tounen nan fant lan jiskaske li fè yon klik.

5.2. Koneksyon antèn

Connect the provided antennas to their respective connectors on the device:

• Antèn mobil: Connect the four cellular antennas to the 'MOBILE MAIN' and 'MOBILE AUX' connectors.
• Antèn WiFi: Connect the two Wi-Fi antennas to the 'WiFi' connectors.
• Antèn GNSS: Connect the GPS antenna to the 'GPS' connector.
• Antèn Bluetooth: Connect the Bluetooth antenna to the 'BT' connector.

Ensure all antennas are securely tightened by hand.

5.3. Koneksyon pouvwa

1. Connect the 4-pin power adapter to the power socket on the front panel.
2. Connect the other end of the power adapter to a suitable power source (9-50 VDC).
3. The PWR LED should illuminate, indicating the device is receiving power.

5.4. Terre

For enhanced safety and protection against electrical surges, connect a grounding wire to the grounding screw on the side panel and to a proper earth ground.

6. Inisyal Enstalasyon

6.1. Aksè a Web Entèfas itilizatè (WebUI)

1. Connect your computer to one of the RUTX14's LAN ports using an Ethernet cable.
2. Louvri a web navigatè a epi antre adrès IP pa defo a: 192.168.1.1
3. You will be prompted for login credentials. The default username is admin. The default password is usually found on a sticker on the device or in the Quick Start Guide.
4. Lè ou konekte avèk siksè, ou pral gen aksè a WebUI for configuration.

6.2. Konfigirasyon debaz

Follow the on-screen setup wizard or navigate through the WebUI to configure essential settings:

• Anviwònman WAN: Configure your primary internet connection (e.g., cellular APN settings, Ethernet WAN).
• Anviwònman LAN: Adjust the local network IP range if necessary.
• Wi-Fi Anviwònman: Konfigire non rezo Wi-Fi ou a (SSID) ak modpas pou tou de bann 2.4GHz ak 5GHz yo.
• Chanje Modpas Defo: For security, it is highly recommended to change the default administrator password immediately.

7. Operating the RUTX14

7.1. Konprann Endikatè LED yo

Monitor the front panel LEDs to understand the router's operational status:

• PWR: Solid green indicates power on.
• SIM1/SIM2: Indicates active SIM card and network registration.
• 3G/4G: Indicates cellular network type (3G or 4G LTE).
• Fòs siyal: Multiple LEDs indicate the strength of the cellular signal. More LEDs lit means stronger signal.
• WiFi (2.4/5): Indicates Wi-Fi activity on the respective band.
• ETH/LAN/WAN: Indicates Ethernet link status and activity.

7.2. LTE Failover

The RUTX14 supports automatic LTE failover, ensuring continuous internet connectivity. If the primary WAN connection (e.g., Ethernet) fails, the router can automatically switch to the cellular LTE connection. This feature is configured within the WebUI under Network > WAN settings.

7.3. GNSS/GPS Functionality

With the connected GNSS antenna, the RUTX14 can provide precise location data. This functionality is accessible and configurable through the WebUI, enabling applications such as fleet tracking or asset management.

7.4. Bluetooth Koneksyon

The integrated Bluetooth module allows for short-range wireless communication with compatible devices, enabling various IoT and industrial applications. Configuration options are available in the WebUI.

8. Antretyen

8.1. Mizajou Firmware

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Firmware updates can be performed via the WebUI under System > Firmware.

8.2. Reset faktori

If you encounter persistent issues or forget your login credentials, you can perform a factory reset. Press and hold the RESET button for approximately 10 seconds while the device is powered on. This will revert all settings to their default values.

8.3. Netwayaj

Sèvi ak yon twal mou epi sèk pou netwaye deyò aparèy la. Pa sèvi ak pwodui netwayaj likid oswa solvan.

NAN. Depanaj

• Pa gen pouvwa: Ensure the power adapter is securely connected and the power outlet is functional. Check the PWR LED.
• Pa gen koneksyon entènèt:
  • Verify SIM card is correctly inserted and activated.
  • Check cellular signal strength LEDs.
  • Confirm APN settings in the WebUI are correct.
  • If using Ethernet WAN, ensure the cable is connected and the upstream device is working.
• Pa Ka Aksè WebUI:
  • Ensure your computer is connected to a LAN port.
  • Verifye si paramèt IP òdinatè w la configuré pou jwenn yon adrès IP otomatikman (DHCP).
  • Confirm you are using the correct IP address (192.168.1.1) and credentials.
  • Eseye efase kach navigatè w la oubyen itilize yon lòt navigatè.
• Vitès dousman:
  • Check cellular signal strength and try repositioning antennas.
  • Asire w pa gen okenn lòt aparèy k ap konsome twòp Pleasant.
  • Verify your cellular data plan limits.

10. Espesifikasyon

11. Garanti ak sipò

Teltonika products are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official Teltonika website. For technical support, firmware downloads, and additional resources, please consult the Teltonika support portal or contact your vendor.