CHACON EcoWatt 550 Schuko Power Consumption Meter User Manual

1. Entwodiksyon

The CHACON EcoWatt 550 Schuko power consumption meter is designed to help you monitor and manage your energy usage. This device provides real-time data on power (watts), consumption (kWh), voltage (vòlt), aktyèl (amperes), and cost, allowing for informed decisions to optimize energy consumption and save money. It features a dual-rate function for precise cost tracking and supports a maximum power of 3500 W.

Imaj 1: Devan view of the CHACON EcoWatt 550 Schuko Power Consumption Meter.

2. Enfòmasyon sou Sekirite

• Read all instructions thoroughly before using the device.
• Do not attempt to disassemble or modify the device. This may void the warranty and pose safety risks.
• Keep the meter out of reach of children and pets.
• Do not expose the device to moisture, water, or extreme temperatures. Use only in dry indoor environments.
• Ensure the meter is properly plugged into a grounded electrical outlet.
• Do not exceed the maximum load capacity of 3500 W. Overloading can cause damage to the device or electrical hazards.
• Si aparèy la sanble domaje oswa li pa fonksyone byen, sispann itilize li imedyatman epi kontakte sèvis kliyan.

3. Enstalasyon

1. Unpack the Meter: Carefully remove the EcoWatt 550 meter from its packaging.
2. Branche nan priz miray la: Insert the EcoWatt 550 meter into a standard Schuko 16 A wall socket.
3. Konekte aparèy: Plug the appliance you wish to monitor into the socket located on the front of the EcoWatt 550 meter.
4. Premye ekspozisyon: The LCD display will illuminate, showing current readings. The integrated rechargeable battery (3.6 V NI-MH) ensures that your settings are retained even during power outages.

Image 2: Close-up of the CHACON EcoWatt 550 display and control buttons (UP, SET, FUNC).

4. Operasyon Enstriksyon

The EcoWatt 550 features an LCD screen and three control buttons: UP, SET, ak FUNC. These buttons allow you to navigate through display modes and configure settings.

• Bouton FONKSYON: Press this button repeatedly to cycle through different display modes. The available modes include:
  • Current Power (W)
  • Total Consumption (kWh)
  • Voltage (V)
  • Kouran (A)
  • Cost (displays total cost based on set rates)
• SET bouton: Used to enter and confirm settings. Press and hold to activate configuration mode for parameters like time and cost rates.
• UP bouton: Used to adjust values when in a setting mode or to navigate through options.

Setting Cost Rates

To accurately track energy costs, you need to set your electricity tariff rates:

1. Peze epi kenbe la SET button for approximately 3 seconds until the cost setting mode is activated (e.g., a tariff value starts blinking).
2. Sèvi ak la UP button to increase or decrease the blinking value to match your electricity tariff (e.g., cost per kWh for Tariff 1).
3. Peze a SET button to confirm the value and move to the next setting (e.g., Tariff 2 if your electricity plan has dual rates).
4. Repeat the process for all necessary cost parameters.
5. Once all rates are set, press the SET bouton an ankò pou sòti nan mòd konfigirasyon an epi sove chanjman ou yo.

5. Antretyen

• Netwayaj: To clean the device, ensure it is unplugged from the wall socket. Use a dry, soft cloth to wipe the exterior. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the plastic casing oswa konpozan entèn yo.
• Depo: When not in use for extended periods, store the meter in a cool, dry place away from direct sunlight and extreme temperatures.
• Entèn batri: The integrated rechargeable battery is designed for long-term use. No user maintenance is required for the battery. If the display does not light up after being plugged in for several hours, the battery may need professional inspection.
• Pa gen okenn pati itilizatè yo ka fè sèvis: The EcoWatt 550 contains no user-serviceable parts. Any attempt to open or repair the device will void the warranty and could pose a safety risk.

NAN. Depanaj

• Pa gen ekspozisyon / Kontè a pa limen:
  • Ensure the meter is securely plugged into a live wall socket.
  • Test the wall socket with another appliance to confirm it is functioning correctly.
  • The internal battery might be fully discharged. Leave the unit plugged into a live socket for a few hours to allow the battery to recharge.
  • Si pwoblèm nan kontinye, kontakte sipò kliyan.
• Lekti ki pa kòrèk:
  • Verify that the appliance plugged into the meter is functioning correctly and drawing power.
  • If cost display is incorrect, re-check and accurately set your electricity tariff rates as described in the Operating Instructions.
  • Try resetting the device by unplugging it from the wall socket for a few minutes, then plugging it back in.
• Bouton ki pa reponn:
  • Ensure the device is not in a locked mode (though this model typically does not have a lock function).
  • Unplug the device and plug it back in to perform a soft reset.
  • If buttons remain unresponsive, contact customer support.

7. Espesifikasyon

8. Garanti ak sipò

For technical assistance, warranty claims, or any questions regarding your CHACON EcoWatt 550 power consumption meter, please refer to the official CHACON websit la oubyen kontakte depatman sèvis kliyan yo dirèkteman. Kenbe resi acha ou kòm prèv acha pou rezon garanti.

You can visit the CHACON brand store for more information: CHACON Brand Store