LEDVANCE 65636
Sylvania 32ft RGB Flexible Light Strip Starter Kit Instruction Manual
Modèl: 65636 | Mak: LEDVANCE
Enfòmasyon enpòtan sou sekirite
- Itilize andedan kay la sèlman: This product is designed for indoor use in dry locations. Do not expose to water or high humidity.
- Sekirite elektrik: Ensure the power adapter is connected to a suitable power outlet. Do not overload electrical circuits.
- Enstriksyon pou koupe: The LED strips can be cut for customized length. Only cut along the designated markings to avoid damaging the strip.
- Enstalasyon: Toujou dekonekte kouran anvan enstalasyon oswa antretyen.
- Chalè: Do not cover the LED strips with materials that may trap heat, as this can cause overheating.
- Timoun: Kenbe pwodwi a ak konpozan li yo pa rive jwenn timoun yo.
Kontni pake
Verifye ke tout konpozan yo prezan nan pake ou a:
- (2) 16.4ft RGB Flexible LED Light Strips
- (1) Pwovizyon pou pouvwa
- (1) IR Remote Controller (with battery included)
- (20) Monte klip
Image: Main product image showing the light strips, remote, power adapter, and clips.
Enstalasyon ak Enstalasyon
- Prepare sifas la: Ensure the installation surface is clean, dry, and smooth for optimal adhesion of the clips.
- Konekte Konpozan yo: Connect the LED light strips to the controller, ensuring the arrows on the connectors align. Then, connect the power supply to the controller.
- Fonksyonalite tès: Before permanent mounting, plug in the power supply and use the remote control to test the light strips. Verify all colors and modes function correctly.
- Customize Length (Optional): If a shorter length is desired, only cut the LED strips along the designated cutting marks (usually indicated by a scissor icon or copper pads). Cutting elsewhere will damage the strip.
- Mount the Strips: Remove the adhesive outer layer from the back of the mounting clips and press firmly for five seconds when mounting. Use the provided clips to secure the light strips in your desired location, such as under cabinets, behind TVs, or along shelves.
- Aktive kontwòl remote la: Remove the plastic tab from the remote control's battery door to activate the battery.
Image: Step-by-step diagram illustrating how to connect the light strips, identify cutting points, and mount them using clips.
Operasyon
The Sylvania RGB Flexible Light Strips are controlled using the included IR remote. Ensure the remote is pointed towards the IR receiver on the controller for optimal response.
Fonksyon kontwòl remote:
- ON/OFF: Power the light strips on or off.
- Seleksyon koulè: Choose from 16 static colors using the color buttons.
- Dimming: Adjust the brightness of the selected color or dynamic mode.
- Mòd dinamik: Select from 4 pre-programmed dynamic modes (e.g., Flash, Strobe, Fade, Smooth) to create different lighting effects.
Image: Detailed illustration of the IR remote control, highlighting buttons for power, color selection, dimming, and dynamic modes.
Antretyen
- Netwayaj: Gently wipe the LED strips with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Viv lavi: The LED technology provides a long operational life of up to 30,000 hours under normal use conditions.
- Ranplasman Remote Battery: If the remote control becomes unresponsive, replace the CR2025 lithium coin cell battery.
Depanaj
| Pwoblèm | Kòz posib | Solisyon |
|---|---|---|
| Limyè pa limen. | Power connection issue, remote battery dead, IR receiver blocked. | Check all connections (power supply, controller, strips). Ensure arrows on connectors align. Replace remote battery. Ensure remote is pointed at the IR receiver without obstruction. |
| Kontwòl remote pa reponn. | Remote battery dead, remote too far, IR receiver blocked. | Replace remote battery. Ensure remote is within range and pointed directly at the IR receiver. Remove any obstructions between the remote and receiver. |
| Some sections of the light strip are not lighting up. | Damaged section, incorrect cutting. | Inspect the strip for physical damage. If a section was cut incorrectly, it may be permanently damaged. Ensure connections are secure. |
Espesifikasyon
| Karakteristik | Detay |
|---|---|
| Nimewo Modèl | 65636 |
| Mak | LEDVANCE (Sylvania) |
| Koulè | RGB (16 colors) + White |
| Longè | 32ft (2 x 16.4ft strips) |
| Itilizasyon | Andedan kay la sèlman |
| Karakteristik espesyal | Color Changing, Dimmable, Energy Efficient |
| Kalite sous limyè | dirije |
| Sous pouvwa | Fil elektrik |
| Kalite kontwolè | IR Remote Control |
| Voltage | 12 Volts |
| Wattage | 24 wat |
| Koneksyon | Enfrawouj |
| Materyèl | Plastik |
| Pwa atik | 10.88 ons |
| Viv lavi | Jiska 30,000 èdtan |
| Rezistans dlo | Pa reziste dlo |
| UPC | 046135656361 |
Garanti ak sipò
This Sylvania LED Flexible Light Strip Starter Kit is backed by a Garanti manifakti 1 zan.
For technical support, warranty claims, or additional product information, please visit the official LEDVANCE websit oswa kontakte depatman sèvis kliyan yo.
Ou ka vizite tou Magazen LEDVANCE sou Amazon pou plis pwodwi ak enfòmasyon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.