GHome Smart Light Switch SW5 User Manual

1. Entwodiksyon

This manual provides comprehensive instructions for the installation, setup, and operation of your GHome Smart Light Switch SW5. This single-pole Wi-Fi smart switch allows you to control your lighting remotely via an app or voice commands through compatible smart home assistants.

Figure 1: GHome Smart Light Switch SW5 Product Overview

2. Enfòmasyon enpòtan sou sekirite

• Danje elektrik: Installation requires working with high voltage. Always disconnect power at the circuit breaker before installation or servicing. If you are unsure about electrical wiring, consult a qualified electrician.
• Fil net obligatwa: This smart switch requires a neutral wire for proper operation. If your house was built or remodeled before the mid-1980s, it may not have a neutral wire. Verify your wiring before installation.
• Konpatibilite Wi-Fi: This device operates only on a 2.4GHz Wi-Fi network. It is not compatible with 5GHz Wi-Fi networks.
• Kalite switch: This is a single-pole switch. It is not designed for use as a 3-way or dimmer switch.
• Konpatibilite chaj: Not compatible with smart bulbs.
• Sètifikasyon: The GHome Smart Light Switch is UL and FCC certified, ensuring quality and safety standards.

Figure 2: Compatibility and Wiring Type Overview

3. Ki sa ki nan bwat la

• GHome Smart Light Switch (2 units)
• Installation Kit (wire nuts, screws)
• Manyèl itilizatè

4. Espesifikasyon

Figure 3: Detailed Dimensions of the Smart Switch

5. Enstalasyon

5.1 Enstalasyon elektrik

1. Dekonekte pouvwa: Before starting, turn off the power to the light switch at your circuit breaker to prevent electrical shock.
2. Retire ansyen switch la: Carefully remove the existing wall plate and unscrew the old switch from the wall box.
3. Idantifye fil yo: Identify the following wires in your wall box:
   • Live Wire (Hot): Anjeneral nwa.
   • Fil chaj: Li konekte ak aparèy limyè a.
   • Fil net: Usually white. (Required for this switch)
   • Fil tè: Usually green or bare copper.
4. Konekte nouvo switch la: Connect the wires from the wall box to the corresponding wires on the GHome Smart Light Switch using the provided wire nuts.
   • Konekte a net wire from the wall box to the white wire on the smart switch.
   • Konekte a Viv wire from the wall box to the black wire on the smart switch.
   • Konekte a Chaj wire from the wall box to the red wire on the smart switch.
   • Konekte a Tè wire from the wall box to the green wire on the smart switch.
5. Chanjman an sekirite: Gently push the wired smart switch into the wall box and secure it with screws. Attach the new faceplate.
6. Retabli pouvwa: Turn the power back on at the circuit breaker. The indicator light on the switch should begin blinking, indicating it's ready for app pairing.

5.2 Enstalasyon ak koneksyon aplikasyon an

The GHome Smart Light Switch can be controlled via the GHome app. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network before proceeding.

5.2.1 Download the GHome App

1. Chèche pou "GHome" in your mobile device's app store (App Store for iOS or Google Play Store for Android).
2. Download and install the GHome app.
3. Louvri aplikasyon an epi anrejistre oswa konekte sou kont ou.

Figure 4: GHome App Interface

5.2.2 Pairing in EZ Mode (Recommended)

1. Ensure the smart switch is powered on and the indicator light is rapidly blinking. If not, press and hold the reset button on the switch for 5 seconds until it blinks rapidly.
2. In the GHome app, tap the "+" icon on the top right corner to add a device.
3. Select "Switch (Wi-Fi)" from the device list under the Electrician category.
4. Confirm your 2.4GHz Wi-Fi network and enter its password.
5. Select "EZ Mode" (usually the default) and confirm the indicator is rapidly blinking.
6. The app will begin searching for the device. Once found, it will be added to your account.
7. You can rename the switch for easier identification.

5.2.3 Pairing in AP Mode (Alternative)

If EZ Mode fails, you can try AP Mode:

1. Ensure the smart switch is powered on and the indicator light is slowly blinking. If not, press and hold the reset button for 5 seconds until it blinks rapidly, then press and hold again for 5 seconds until it blinks slowly.
2. In the GHome app, tap the "+" icon, select "Switch (Wi-Fi)", and then choose "AP Mode" from the top right corner.
3. Confirm your 2.4GHz Wi-Fi network and enter its password.
4. Go to your phone's Wi-Fi settings (WLAN) and connect to the hotspot named "SmartLife-xxxx".
5. Return to the GHome app and wait for the device to connect.
6. You can rename the switch for easier identification.

5.2.4 Connecting with Google Home

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Google Home app on your phone.
3. Tap "Get Started" and sign in with your Google account.
4. Go to "Settings" and tap "Add device".
5. Use the search function to find "GHome" and select the GHome app.
6. Click "Agree and link" to link your GHome account with Google Home.
7. Select your GHome Smart Light Switch from the list of devices to add it to Google Home.

5.2.5 Konekte avèk Amazon Alexa

1. Ensure your GHome Smart Light Switch is already paired with the GHome app.
2. Open the Amazon Alexa app on your phone and sign in.
3. Tap "More" > "Skills & Games" > "Search" button.
4. Type "GHome" and select the GHome skill.
5. Tap "ENABLE TO USE" and then "Agree and link" to link your GHome account with Alexa.
6. Alexa will discover your device. You can then control it using voice commands.

6. Operating Your Smart Switch

6.1 Kontwòl vwa

Once connected to Alexa or Google Assistant, you can control your lights with simple voice commands:

• "Alexa, limen [Non Limyè a]"
• "Hey Google, etenn [Non Limyè a]"

Figure 5: Voice Control in Action

6.2 APP Remote Control

Control your lights from anywhere using the GHome app:

• View the real-time status of your lights.
• Limen oswa etenn limyè yo adistans.

Figure 6: Remote Control via GHome App

6.3 Schedule and Timer Functions

Automate your lighting to fit your daily routine:

• Set daily schedules for lights to turn on/off at specific times.
• Utilize sunrise/sunset automation (e.g., porch lights on 30 minutes after sunset, off 25 minutes before sunrise).

Figure 7: Scheduling and Timer Features

6.4 Kontwòl Gwoup

Manage multiple smart switches simultaneously by creating groups within the GHome app.

Figure 8: Group Control Functionality

7. Antretyen

7.1 Mizajou Firmware

GHome regularly releases firmware updates to optimize stability and user experience. It is recommended to upgrade the firmware to the latest version (e.g., V1.1.3 or newer) by following the prompts in the GHome app.

7.2 Netwayaj

To clean the smart switch, ensure power is disconnected at the circuit breaker. Use a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.

NAN. Depanaj

• Switch la pa reponn:
  • Tcheke si disjonktè a limen.
  • Ensure the switch is properly wired (especially the neutral wire).
  • Verify your Wi-Fi network is 2.4GHz and stable.
  • Try resetting the switch by holding the reset button for 5 seconds.
• Pa ka konekte ak Wi-Fi:
  • Confirm your router is broadcasting a 2.4GHz signal.
  • Ensure your phone is connected to the 2.4GHz network during pairing.
  • Deplase switch la pi pre routeur Wi-Fi ou a.
  • Try both EZ Mode and AP Mode pairing methods.
  • Verifye modpas Wi-Fi ou a de fwa.
• Kontwòl vwa a pa fonksyone:
  • Ensure the GHome skill/service is enabled and linked in your Alexa or Google Home app.
  • Verify the device name in the GHome app matches the name used in voice commands.
  • Check the internet connection of your smart assistant device.

9. Garanti ak sipò

9.1 Garanti

GHome Smart Light Switches typically come with a 12-month warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Sipò pou Kliyan

For further assistance or technical support, please refer to the GHome Smart official website or contact their customer service directly. Contact information can usually be found on the product packaging or the GHome Smart websit.